Search results

  1. IDIoit

    Brass injector return caps

    since this popped up ill throw my .02 out there... i dont really care for the plastic caps. i just dont like plastic crap! i was fortunate enough to score a set of aluminum caps from @ADV several years ago. they have been on my truck for the past 6 years. zero leaks, zero issues. i have a set...
  2. IDIoit

    parallel turbos

    man, im boosting 25 psi on a factory cal IP, and i cant get this thing to pop. stock N/A block on headbolts. i actually deleted the wastegates. havnt had any issues
  3. IDIoit

    1953 Chrysler Imperial Turbo Diesel

    killer project... my son and i did the same with a 61 F100 we frame swapped and put a 7.3/zf5 in
  4. IDIoit

    F-150 Clutch Rebuild Parts?

    just because it diesels, dont make it a diesel ;)
  5. IDIoit

    86 bed bolts

    go buy a set of super duty bed bolts. they have nut clips that lock the nut to the frame, and a torx head. alot easier to find, install, and not worry about
  6. IDIoit

    6.9 timing Where did the 8.5* come from

    when i did my first IP, i was -10 degrees out. always started great. but wasnt clearly right. i tried a few different settings and 8-9 was the best IMO. a good pump should start regardless. ive also ran a pump at +10 degrees, and it started fine as well 8.
  7. IDIoit

    The Drool Bus

    ive finally mounted the cowl in its correct place. got the radiator to fit today. it all needs to come apart, but for now, its mocked up and fits quite nicely.
  8. IDIoit

    DB2 vs DB4 pump

    7.3 TIDI PES8P inline pump this is going into a 41 1/2 ton ford drag car
  9. IDIoit

    Factory ATS or aftermarket 093 up pipe

    take me about 7 days. i need to order parts. pm sent bud
  10. IDIoit

    Factory ATS or aftermarket 093 up pipe

    i do not man, i cant get any more of the Y's to produce them
  11. IDIoit

    New IDI owner looking for rebuild advice

    i actually had plates made for the deck to bolt on so i can pressure test. aluminum plates to cover the coolant in, and oil cooler mounts and add 20 psi of air, after i filled with water. if the bores and bearings look good, along with the piston faces, and the pressure test checks out, i would...
  12. IDIoit

    New IDI owner looking for rebuild advice

    at this point, i would be pressure testing the engine to make sure there are no cracks. its likely the oil cooler that was giving you such grief but now that youre here, i would throughly inspect the bores, crank and rod journals. total seals are nice, but i would only use them when doing a...
  13. IDIoit

    a project i call, THEE WEE BASTARD

    delta tango, this is delta tango 11, immediate suppression, drop all remaining rounds on my position over.
  14. IDIoit

    Inj. pump line tool?

    alright you guys are giving me a headache :p it takes me about 15 min to pull an injection pump and throw it in a vice. if done correctly, you wont have to get in there for the life of the IP. ive also deleted the hard feed line to the IP with just a regular socket and a ratchet. but carry on...
  15. IDIoit

    The Drool Bus

    small progress is still progress
  16. IDIoit

    The Drool Bus

    super short bus is headed to fresno this week, sometime. on my bus, the next thing is to get the front end on, i need to drop it down on the bus and add another filler panel. then to get my drivers seat all done, and get it running. ive got 2 dt466's one in the 01 SD, and one in the bus. ive...
  17. IDIoit

    The Drool Bus

    no sir, i bought it the day after i bought the first bus lol but the frame i got, had a dt466 in it, but i had to pull it in order to get the frame for free. this bus is loaded up, ready to go to fresno. then ill finally have my trailer back!
  18. IDIoit

    The Drool Bus

    oah yea, forgot to post.
  19. IDIoit

    The Drool Bus

    holie schnikies, that was a ton of work.
  20. IDIoit

    The Drool Bus

    the floor and patches are complete! the bottom has been primed and i rubbed my caulk all over it for sealing. today is to bedline the bottom
  21. IDIoit

    The Official LUK 07-225 SMF Clutch Kit & ZF S5-42/47 Rollover Noise Poll

    my issue was the lift, and driveshaft angles. made the entire trans sound like it was gonna blow up. ended up using a 271 super duty transfer case, a DC driveshaft and changed the rear pinion angle
  22. IDIoit

    The Drool Bus

    top shelf cherry flavored KY :D
  23. IDIoit

    The Drool Bus

    3 holes in... and schnap
  24. IDIoit

    The Drool Bus

    gonna have a lounge up top
  25. IDIoit

    The Drool Bus

    doing a little panel replacement . rearend will be drilled and bolted in tomorrow.

Latest posts

Forum statistics

Threads
92,996
Posts
1,155,941
Members
26,574
Latest member
abcdefg

Members online

Total: 1,662 (members: 8, guests: 1,654)

Share this page

Top