Search results

  1. S

    Not sure which axle seal to get

    Thanks I will here shortly. I'm pretty sure it's the 10.25 sterling but i could be wrong.
  2. S

    Not sure which axle seal to get

    Thanks I appreciate it. @IDIBRONCO I got that saved for when I buy it this Friday. I was wanting to replace both bearings on both sides but I'm not sure which one it is. You wouldn't happen to know the part number for that because I keep finding tapered bearings and the even ring ones but I'm...
  3. S

    Not sure which axle seal to get

    I've go grease all over my brakes and drum on the rear passenger. It's a 94 F250 7.3 idi. I went to autozone and they gave me this small seal but the last time I did my brakes a couple years ago I took the hub off and put the same seal back in because I didnt know I was supposed to replace...
  4. S

    Sticks at 1500rpms and Black smoke when pulling my tractor

    I'm hoping so. I had no idea I had to time it once I put it in. People told me If i removed the gear cover I'd have to time it but i think itll be in good shape after this too.
  5. S

    Sticks at 1500rpms and Black smoke when pulling my tractor

    Yeah I messaged @renjaminfrankln since he's in Raleigh NC and I'm just down the road in Wilmington NC. Hopefully he can help me out when I hear back. I dont mind paying as long as I know I'm getting it right. I'm with you on getting someone on here to do it. I've had a tremendous amount of help...
  6. S

    Sticks at 1500rpms and Black smoke when pulling my tractor

    Thanks for the input. I'll check it out and look into. There are some good deisel shops around town that I'll probably talk with. Though the injectors are putting out 1600psi vs the 1900-2075 they are supposed to so I may end up changing them anyways because I would like everything to be to specs.
  7. S

    Sticks at 1500rpms and Black smoke when pulling my tractor

    No I didnt know that I needed to do that because I was told if I took the cover over the gear that the IP bolts to then it would be out of timing. I never removed it so I I thought it wouldn't effect the timing
  8. S

    Sticks at 1500rpms and Black smoke when pulling my tractor

    I've always been mechanically inclined but never knew much about vehicles expect how to change basic parts. I've had a crash course in what not to do and what to do to fix and diagnose a 7.3 idi. I had never done any interior engine work till this and pulled the heads and changed them by hand...
  9. S

    Sticks at 1500rpms and Black smoke when pulling my tractor

    I tried to keep it short but I guess not lol
  10. S

    Sticks at 1500rpms and Black smoke when pulling my tractor

    Jeff at deisel parts told me they atomized correctly for the most part but a few of them kinda peed as he put it but after a few pumps of fuel they sprayed correctly but not at the correct pressure. I'm gonna swap out my injectors for theirs on friday and see what happens. @stealth13777 Short...
  11. S

    Sticks at 1500rpms and Black smoke when pulling my tractor

    My other thought was my engine bay caught fire a while back and the hose for the air filter was obviously warped some. Could the hose pictured allow a lack of air flow?
  12. S

    Sticks at 1500rpms and Black smoke when pulling my tractor

    I appreciate the explanation, I understand the fuel to air ratio needs to be right and that's why I replaced the filter and thought maybe the injectors were putting out too much. Air filter in a couple months old and I had the injectors pop tested at Deisel Parts of the Carolinas here in...
  13. S

    Sticks at 1500rpms and Black smoke when pulling my tractor

    94 7.3 idi When I'm pulling my ditch witch (about 5k lbs), my truck accelerates fine but once it gets into 2nd or 3rd gear once the rpms hits 1500 it's kinda stays there but slowly rises unless I give it more fuel but then a lot of black smoke comes out the exhaust. It wont do it if I baby it...
  14. S

    A/C sucks

    Thanks guys. I've been looking for a place for the family and moving the past week all while working 8-12 hours 5 days a week. The vacuum system was sealed. It was an airflow problem like some of yall suggested with the evaporator. I cracked open the ac box and there was a think layer of what...
  15. S

    A/C sucks

    94 F250 IDI My ac blows cold and it has different setting when you turn the knob but high barely feel like a light breeze when you are sitting back. I have to put my arms up to the vents just to get cool. I bought a new blower motor which I think helped some but not by much if it did. It's got...
  16. S

    Truck shakes/bounces violently when braking hard at higher speeds

    I havent gotten around to checking it out man. I've been getting home from work after dark and nobody wants to experiment after digging trenches all day lol
  17. S

    Truck shakes/bounces violently when braking hard at higher speeds

    The steering has a small amount of play if you mean how far it can turn before turning the wheels. I mean like an inch. The steering is pretty sensitive in the sense that it seems in good shape. What would I look for if looking for worn tie rods if it's something easily explainable. If not I...
  18. S

    Truck shakes/bounces violently when braking hard at higher speeds

    Yeah I definitely think it's the rotors. I don't think it could be much more than that. I can get rotors for around 60 bucks each at autozone so it wouldn't hurt update them
  19. S

    Truck shakes/bounces violently when braking hard at higher speeds

    I didnt have this problem before when I drove truck everyday. It sat for a 6ish months. I recently started driving it and now when I hit the brake at higher speeds it shakes or bounces from side to side pretty violently. Itll actually throw stuff off the dash sometimes. Sometimes it's just a...
  20. S

    A/C clutch engages the disengages

    The air gap was definitely the issue. I didnt think there was a washer in the plate because I couldn't get it to come out till I used needle nose pliers. I thought maybe someone had already tried to remove the washer before or something. Ac is blowing cold as the winter snow. I really...
  21. S

    Where to plug this vacuum line in

    Though I have to admit when I bought one a year ago I didnt know anything about bleeding brakes and like an idiot I didnt read the instructions and being a young know it all at the time I ended up using the hand pump and pumping a crap ton of air into my brake system. I bled them for and I'm not...
  22. S

    Where to plug this vacuum line in

    Yes it what a whole kit
  23. S

    Where to plug this vacuum line in

    @Randy Bush I definitely appreciate your input though. Thanks for the help
  24. S

    Where to plug this vacuum line in

    I see what your saying. I never thought about the fact that it had to pull all that air. I was thinking as soon as it was pumped it would start going up....probably warranted that booster for nothing lol
  25. S

    Where to plug this vacuum line in

    Vacuum pump solved the problem all around it would seem. From brakes to ac vents. I just need to get all the air out of my brake system and itll be back right 100%.

Latest posts

Forum statistics

Threads
92,929
Posts
1,155,105
Members
26,430
Latest member
Brownlee5212

Members online

Total: 787 (members: 1, guests: 786)

Share this page

Top