Recent content by youngunbd

  1. Y

    IDI Engine Removal

    Pop the hood off, pull the radiator, pop the fan off. Take off starter, bellhousing bolts. Undo the motor mounts in the middle. Pull forward, shake like hell to release then lift to the sky! Shes tall, heavy, awkward and awesome
  2. Y

    Question about injection pump timing 87 Ford f350 6.9 C6 trans 3.55 gears.

    Yeah send an email to Justin at idiperformance.com Gotta keep bugging him too, he is a busy guy but will definitely help out. You'll get a better pump for what most people charge to rebuild it stock, he'll do injectors too. Either an overdrive unit or a ZF5 is your best bet. One other...
  3. Y

    Diesel RPM limitation

    Send him over to steel soldiers, they have a fair number of unimog folks there. And his engine sure isn't a IH diesel, those Mercedez diesel's are tricky. I think the only way to get more speed on a mog is the "high speed" axles, they are a pretty penny if you can find a set though. Unimogs...
  4. Y

    Question about injection pump timing 87 Ford f350 6.9 C6 trans 3.55 gears.

    The timing marks on the pump and cover are pretty much "suggestions" They get you in the ballpark and let you figure out the rest. If your pump has 180k on it, that might be doing it too, their rated life is mostly just 100k. Mine made it 165k but then I blew the pump and 4 injectors all in...
  5. Y

    Question about injection pump timing 87 Ford f350 6.9 C6 trans 3.55 gears.

    Make sure to time it with the engine OFF Clock it using a punch to see where its at now, then try retarding it further or advancing it a bit. Pretty much test it a bunch of different ways. Change it, run it, drive it and leave it where you like it
  6. Y

    Headlight relay kit

    The relays I linked off amazon are great, with nice beefy wire in the plugs, getting your own headlight connector, some wire and heat shrink and you'd be set
  7. Y

    Headlight relay kit

    Snag this: http://www.amazon.com/Relay-Harness-Bosch-Style-40AMP-HRNS/dp/B005HFYE1O/ref=sr_1_1?ie=UTF8&qid=1393229809&sr=8-1&keywords=5+pack+of+relays Some heat shrink, solder and a few connectors for the headlights and some spare wire and you are set for like 25 bucks. Plus these are...
  8. Y

    Possible oil cooler replacement?

    There is a good amount of work involved on modifying anything on most motors, but posting your mod helped a lot with pictures! I was always curious how efficient our oem coolers were. I don't have my oil pressure sender on yet, or temp sensor but I plan on getting a good baseline for my...
  9. Y

    Possible oil cooler replacement?

    That would probably work perfectly. Would that type aux oil cooler perform as well or better as our current coolers? Definitely be easier to work on heh
  10. Y

    Possible oil cooler replacement?

    I should rephrase that, computer controlled plasma cutter. I'm the one who put it together and ran it at my high school so they let me use it whenever I need something
  11. Y

    Possible oil cooler replacement?

    I got curious about reading of oil cooler problems and that it is quite a pain to get to and re-seal. I figure there's got to be an alternative that could possibly work better. I guess the first question is what is the cooling capacity of our current coolers, as in surface area inside a...
  12. Y

    Question for you guys running Typ4 cams

    200 a hole for sleeves?? dang heh my shop is 80 a piece. too bad it costs lots to drop ship a block to CA
  13. Y

    How much blowby is too much blowby?

    I thought i had ridiculous amounts of blowby so then I began chasing everything down... No more CDR lol Previous owner hocked it in favor of a slobber tube straight out the bottom... When test driving the truck I had no less than two people (the only two I noticed at least) tell me the truck...
  14. Y

    what do yall use to clean injector bores?

    I got the universal 12 ga cleaning kit from wally world, and then just hooked it up to my drill! Spray in PB blaster and go knock it out real quick, for the back two, I had to bend the brush that they include and do it manually but it all goes pretty quick
  15. Y

    Changed Oil & What A mess I made

    I installed a Fumoto drain valve for the sump and I will begin punching the filter, I dumped mine last time and now that I have switched to the 1995, i DONT want to ever dump that one over!!
See more

Latest posts

Forum statistics

Threads
91,338
Posts
1,130,597
Members
24,140
Latest member
placidoert

Members online

Total: 831 (members: 11, guests: 820)

Share this page

Top