Recent content by TrueBurner

  1. T

    Left Glow Plug Switch On Fried Something

    Side note though, high idle rev still isn't working for some reason.
  2. T

    Left Glow Plug Switch On Fried Something

    Want to start by saying thank y'all for all your help. I finally started using my brain yesterday and got it to work. I kept going back to why are the two bolts that are connected to the plastic module housing from the relay getting a charge. So it turns out the relay wasn't grounded properly...
  3. T

    Left Glow Plug Switch On Fried Something

    Nothing happens when I connect the red jumper to large input post coming from breaker/battery on relay and other side to + battery. If I attach the red jumper to the other large post on relay that leads to glow plugs it sparks. Also not sure if this means anything but I'm not getting a high rev...
  4. T

    Left Glow Plug Switch On Fried Something

    I hear a click when I initially turn the keys. But no sound when I flip the switch. Yes the incoming lug from breaker connected to battery still reads 12.9 v when the switch turns on. And lug connected to switch also reads that. Another interesting thing that may help is that when I leave the...
  5. T

    Left Glow Plug Switch On Fried Something

    Replaced glow plugs still nothing. Have tried four relays now and not one has worked. Still the same issue no power getting to the relay plug connected to the glow plug harness. Pretty stumped. What is interesting is the two silver bolts that hold the relay in place are getting a charge going to...
  6. T

    Left Glow Plug Switch On Fried Something

    That's my question, why isn't it going through the solenoid and into the glow plugs? Shouldn't I be able to read the voltage on the post going to the glow plugs? It seems like I will end up replacing my glow plugs but it doesn't make sense how current isn't going through the solenoid, unless...
  7. T

    Left Glow Plug Switch On Fried Something

    Thank you for your inputs on the switches, seems like that is going to be an easy fix. I am still trying to figure out why power isn't getting to the plugs though now. Took the plugs out and they look old but not fried so to say. I used a different solenoid and same problem as I mentioned above...
  8. T

    Left Glow Plug Switch On Fried Something

    We did a voltage test on the solenoid and everything checked out but the post on the solenoid that attaches to coil and then leads to glow plugs had no charge. So we didn't even use the meter to check on the specific glow plugs because we thought there is no power going to them from the solenoid...
  9. T

    Left Glow Plug Switch On Fried Something

    Amazing feedback, thank you all! I inherited it like this and obviously don't have enough knowledge yet to know I should have changed certain things. I just took it to a friend of mines who way better at knowing how electrical works since thats not my forte. So there is power getting to the...
  10. T

    Left Glow Plug Switch On Fried Something

    Left my glow plug switch on after starting and driving my truck. Not sure if it got switched on by accident after starting it and driving because I usually turn it off after 10 seconds before starting truck. Anyway about a hour later I was near my truck and it had that electrical burn smell...
  11. T

    AC/Heat Not Blowing Air when starting up or idle

    Turn Knob
  12. T

    AC/Heat Not Blowing Air when starting up or idle

    Thank you! Any tips on finding a potential leak? Does a weak pump mean I just need a new one?
  13. T

    AC/Heat Not Blowing Air when starting up or idle

    Hey Y'all Having issues with my AC/Heater. Good thing is that they both blow hot/cold air when the truck is moving. But when you stop or are idling or when you initially fire up the truck no air comes out even though it's still making sounds. Haven't done any troubleshooting yet, thought I'd...
  14. T

    Cracked Caliper Piston / Steering Drags to right after new rotors/pads

    So when I went to replace the hoses the front right wheel was basically seized when trying to spin it once it was jacked. Replaced the hoses, bled the brakes, went to spin the wheel again to test it and wasn't seized but was still not smooth. Drove it around a little bit and while it wasn't...
  15. T

    Cracked Caliper Piston / Steering Drags to right after new rotors/pads

    Thank you! Pretty sure the hoses are original. The only thing I didn't replace when I switched over to hydro boost. Ill give it a go and see if that fixes everything
See more

Latest posts

Forum statistics

Threads
91,310
Posts
1,130,166
Members
24,121
Latest member
720Diesel

Members online

Total: 753 (members: 15, guests: 738)

Share this page

Top