It was 1 degree yesterday so it’s todays project! It’s a square edge o-ring like these. https://www.mcmaster.com/o-rings/cross-section-shape~square/
I have decided to just make the switch to the NAPA gold WIX filter that eliminates the bowl. That bowl also has a schrader valve on it that...
Well that’s weird. “CalIDI” right above you can see it. Are you on mobile maybe? Not that it should matter. Not sure, sorry about that. She’s a 1993 F350 with a 7.3L non turbo IDI with a ZF5.
I tore it apart and yeah it’s inside. It’s inset on the retaining nut which screws to the other end of the stem of the brass draincock. As you screw counterclockwise it lowers itself against the inside of the sediment bowl to make the seal.
I can see my signature line, is it not showing up...
Are you me? Im outside now working on the water separator bowl - it's 30 but going to 20 below tonight and a high of 9 tomorrow. I work in either the snow and freezing temps in the winter or ankle deep mud in the summer. Not sure which I hate more. I know one thing, my truck wouldn't have...
No, it definitely could be but I feel like the gauge on the truck is lower than it was last winter making me think it’s the thermostat. It’s only a the factory gauge which is almost worthless but I’ll block off the radiator to see if I can get the gauge to move at all and some heat in the cab...
I still have the OEM screw on bowl. Thing is leaking a heavy drip about every 5 seconds. I can only assume that it’s dripping right out of the middle and not running down to there and then dripping. I don’t have the tube hooked up anymore so perhaps that has something to do with it too? Now...
Okay found it, it’s at the separator, the little brass drain nut. Appears to be dripping right from the center of that. The drain hose has been discontinued so it’s just the nut there. Isn’t there an o ring in that nut? I can’t quite remember.
I have practically no heat and I assume that is because the thermostat is stuck open. Replacing it seems like a bit of a job and my thought was that perhaps there was an aftermarket option that mounts in between the hose and the housing, or at the very top of the housing? Hoping for something...
I am getting a really bad unspent fuel smell when the heat is blowing. It seems unnoticeable without the heat though. I haven't started digging for leaks but I have done a quick visual and didn't see anything obvious. Where should I start?
Thanks!
Hey welcome! I want to say most importantly, thank you for being part of the resistance to medical fascism. It’s the issue of our lifetime. We were preparing to lose everything once the mandates rolled out earlier this year. We were prepared to lose our home and live on the road if that’s...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.