Recent content by snatchal

  1. S

    rust proofing primer

    Planning to paint my frame and flatbed cause they are rusty. What is a good product to use to seal in the rust?
  2. S

    Chewed up teeth on flywheel

    Thanks for the info guys. That 12v relay sounds interesting. How exactly is that done?
  3. S

    Chewed up teeth on flywheel

    I have been having problems with my starter not engaging. I replaced it today with a new one. When I took off the old one I could see some of the teeth on the flywheel are chewed up pretty bad. The new starter acts the same way, just grinds against the gear on the flywheel. So I put a 15/16...
  4. S

    rear disc

    I did the rear disc conversion a few years ago. 50,000 miles later I am still happy. I pulled a heavy dump trailer with 5 tons of shingles in it last week. Stopped just fine. Here is an old thread with a couple pics. http://www.oilburners.net/forums/showthread.php?t=17335
  5. S

    Brake rotor question

    Anyone know where I could buy a rotor, hub, and studs all in one unit?
  6. S

    Brake rotor question

    The caliper on the front of my truck have been sticking lately. It gets so bad that I can smell the pads burning. Yesterday I was going to replace both calipers and pads but when I pulled the tire noticed a large crack in the rotor. I have been looking for rotors online and have found...
  7. S

    Glow plug problem? or worse?

    Leaky injector, never thought of that. I was afraid of something wrong deeper in the motor. I do get a lot of white- blueish smoke on start up.
  8. S

    Glow plug problem? or worse?

    I changed my glow plugs recently and one of the old ones was full of dark black oil. Is that a sign of a major problem?
  9. S

    Last Call for Parts!

    What kind of shape is the cab in? Is the floor rotted out?
  10. S

    Coldest no-block heater start

    -20 here in Gladstone Michigan this morning. So cold they canceled school. I didn't plug it in last night cause I didn't plan on using it today. Went out this morning just to see if it would start. Had to cycle the glow plugs 3 times before she fired up. Sounded like a coffee can full of rocks...
  11. S

    Help me ID this thingamajigger

    I have that same solenoid feeding power to my boss plow pump.
  12. S

    FOR ALL YOU GELLED UP PEOPLE

    Sounds like we need a heater right in the fuel tank
  13. S

    Removing emusified water and antifreeze from WMO/ATF

    I have a half a barrel of WMO that is contaminated with water. When I first got it it looked the color of a milkshake. It has since been sitting undisturbed for a year . Now it is black, so I think all of the water has settled to the bottom. The barrel is sitting in an unheated shed. Next week...
  14. S

    WMO: Can Old Motor Oil Lose Volitility Like Old Gas?

    How much gear oil did you dump in? That may be a little on the thick side.
  15. S

    Prechamber coaking due to WMO

    Yes I replaced them with new ones. I probably could have ran them another year. I have a bunch of them that I got a good deal on last year at Autozone. I have been experimenting with used oil for a while now. With diesel at 5 bucks a gallon I'll burn anything I can get my hands on. I have found...
See more

Latest posts

Forum statistics

Threads
91,322
Posts
1,130,329
Members
24,130
Latest member
JFMac

Members online

Total: 454 (members: 11, guests: 443)

Share this page

Top