Recent content by Runboy

  1. Runboy

    4" Exhaust Bends and Tubing - $40

    I have these exhaust parts left from a previous exhaust project. All 4" 2 - 45's 2 - Couplers Approx. 5ft straight tubing This is probably $100 worth new. $40 takes Items are located in antioch Ca Mike (925) 759-0276 [email protected]
  2. Runboy

    4" Exhaust Tubing 45's Slips CAT Delete Pipe?

    I have the following 4" Aluminized exhaust parts for sale. Great if your working on a custom exhaust system or want to make a "cat delete" Pipe for your diesel pickup. 2 - 45's 2 - straight connectors Approx. 5ft of 4" tubing Can either be slip fit and clamped or welded. This is...
  3. Runboy

    SkyJacker Nitro Shocks 89-97 F-350 4x4

    I have 4 Skyjacker Nitro Shocks off of an 89 F-350 4x4 Diesel with 4" Lift. They only have approx. 1000 miles on them and need boots and a few bushings (needed them for other shocks that were installed). Great deal for someone needing a replacement set or? 2 of each: N8071S N8060S...
  4. Runboy

    IDI Goodies For Sale - Fan Clutch Wrench / Stanadyne Perrformance Formula

    I have a KD tool Fan Clutch Wrench for 6.9/7.3 IDI's (used twice) and 4 new 16oz. bottles of Stanadyne Performance Formula for sale if anyone is interested. $50 + the shipping takes all. Let me know if interested, Mike - [email protected]
  5. Runboy

    89 F350 Crew Cab 4x4 - Banks Turbo - Stacks - $9000 Takes!

    For Sale is my 1989 F350 Crew Cab 4x4 with Banks Turbocharged 7.3L Diesel. Engine has approx. 70K on rebuild. Truck has automatic trans, 4.10 gears, power windows, power rear slider, a/c, etc. Also custom smoke stacks (over $1000 in parts). Wheels are real Alcoa Classics. Truck runs strong...
  6. Runboy

    Truck Relisted on Ebay - 89 350 4x4 w/STACKS!

    Shackle reverse I haven't done any twist tests with it but it does feel maybe a bit more limber. Ride was improved by maybe 5%. Every little bit counts on these old beasts. It does seem to track down the road better though. And hopefully not beat up front suspension components as bad as these...
  7. Runboy

    Truck Relisted on Ebay - 89 350 4x4 w/STACKS!

    I have relisted my truck on ebay. If anyone is interested in a nice solid rust-free CA truck with lots of time and money already invested, check it out! Mike http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=007&sspagename=STRK%3AMESE%3AIT&viewitem=&item=170112706852&rd=1,1
  8. Runboy

    Remote oil filter mount?

    Anyone know off the top of their head where to source a remote oil filter mount that will accept the 7.3L stock oil filter? I believe it is a 1 1/2"-16 thread. Is that correct? Mike
  9. Runboy

    Pressure at oil filter?

    Does anyone know the exact routing of oil from the pump through the filter and into the engine on the idi? I am wondering if the filter is a "high pressure" filter or if the bypass bleeds off excess pressure before the filter. Mike
  10. Runboy

    Time to sell the truck - 89 Crew Cab 4x4 w Stacks

    Price Yes, price. Any of you boys who have done a rebuild or other major work can agree with the value of a truck that has had something major done. Here in california, that is a lot of truck for the money. How much do the na-sayers think a 32 ford that probably books for $3500 sells for in...
  11. Runboy

    Time to sell the truck - 89 Crew Cab 4x4 w Stacks

    Not sure how many of you guys noticed my ad on ebay, but it is time to let the truck go. Really hate to sell it with all the time and money that has been invested but have other projects needing my attention. I know it sounds a bit pricey but also consider the cost of rebuilding an engine and...
  12. Runboy

    I need a fuel line

    Line Most of the auto parts stores also carry a "ford quick connect" repair kit with like an 18" section on line and a fitting or a piece of line and 2 barbed connectors. The can also order you a whole bulk roll of the stuff. That is what I did when I was in may fuel system eliminating the...
  13. Runboy

    3 and 4 row radiator fun

    Temp Just out of curiousity, what degree is the stock thermostat? Mike
  14. Runboy

    Lets talk performance fuel injection....

    Pumps / Cam There's always the approach of making money while the customer does your R&D too :backoff I know this is off topic, but what about a change in cam profile? Everyone seems to avoid this topic on the IDI. Mike
  15. Runboy

    Lets talk performance fuel injection....

    Timing Curve? One other thought, is there a timing advance curve built into the IP? Mike
See more

Latest posts

Forum statistics

Threads
91,328
Posts
1,130,449
Members
24,133
Latest member
Nanohawk

Members online

Total: 790 (members: 11, guests: 779)

Share this page

Top