Recent content by Ocelotl

  1. Ocelotl

    OBS Diesel Picture Thread

    My OBS
  2. Ocelotl

    OBS bumper differences F250/F350

    My factory 1993 IDIT F250 (C code/8th VIN digit) had the OEM front bumper with the two wide vents and a narrower one in the middle (makes room for the front license plate). I replaced it with one exactly the same from a OBS PSD, year unknown. I don't know whether there are differences between...
  3. Ocelotl

    Eco-Boost?

    I borrowed a relative's 2013 F150 Ecoboost to fetch my broken down Volvo 850 (fuel pump) and thought it made decent power for a V6, given the relatively light load. Towed the car on a Uhaul trailer for 125 miles very adequately and smoothly on flat south Texas ground, and having all the creature...
  4. Ocelotl

    Facet/Carrier lift pump on inner fender. Good idea?

    FWIW, here's some pics of my installation. Plenty of room between the bowl and the frame. I put the relay to the right of the fender solenoid.
  5. Ocelotl

    Facet/Carrier lift pump on inner fender. Good idea?

    I installed mine right on the support bracket for the passenger side battery, half between the engine and the radiator. It was difficult to wedge a cordless drill down there to drill the mounting holes but I managed. I thought I'd keep the inner passenger fender area free for when I install a...
  6. Ocelotl

    Harbor freight comp testor.

    FWIW, this is the setup I use. The gauge is actually pretty good quality, and I really like the price. It's better than the HF leak-down setup I bought for gassers and broke right away. I just chucked the VW-specific adapter that comes with it into the odd-tools drawer and bought one of the S&G...
  7. Ocelotl

    Ex Hot Shot? '87 F-350 for sale in DuBois (central) PA

    Here's another one in Dallas. Expensive, but nice to look at. http://dallas.craigslist.org/dal/bfs/4221087342.html
  8. Ocelotl

    1978 F250 Supercab 4x4 12 valve Cummins Diesel in TX

    I have no connection with this sale, just found it on CL and thought it was a cool rig. Kind of strange that a P-pump would crap out and he doesn't want to mess with swapping it even though he has one on hand. If I knew anything about 12 valves I'd be going to look at it, though...
  9. Ocelotl

    Parting 94 F350 4x4 SRW 7.3 idi turbo, E4OD, runs & drives

    PM sent to check on turbo-specific engine wiring harness.
  10. Ocelotl

    Help me ID this turbo intake horn

    Good to know about the oil through the flywheel bolts. I was thinking main seal, that shows ya what I know :rolleyes: I guess if the level came up due to oil overfilling it creates the leak and the risk of a runaway? Would overfilling hurts much otherwise? What about if it's water while it's...
  11. Ocelotl

    Help me ID this turbo intake horn

    LOL Sounds like what I told him. My offer was a little higher, but he wouldn't budge
  12. Ocelotl

    Help me ID this turbo intake horn

    Cool, thanks! Too bad he didn't want to part with only the turbo bits, looks like a nice part to have for if'n when an IC...
  13. Ocelotl

    Help me ID this turbo intake horn

    Thanks, that makes sense seeing how it sticks out way up high. No, I didn't buy it. I went to look at it because he said it was a '94 factory IDIT, but checking the serial it was a regular N/A. I already have a spare N/A engine and he didn't want to sell the turbo bits separate, so I let it be.
  14. Ocelotl

    Help me ID this turbo intake horn

    Found this intake/horn at a shop in town and it doesn't look like the Sidewinder setups I've seen. Just wondering what kind it might be. All they could tell me is the engine is from a fummins conversion done elsewhere.
  15. Ocelotl

    Coolant Filter Head twenty bucks and Compression Tester

    It figures right after I bought my IH brand coolant filter head I ran into these on fleabay for $20 shipped, so I thought I'd pass it along in case anyone is looking for one. They are apparently similar to Fleetguard Part# 020416300S. I have not used these but my thinking is that a filter head...
See more

Latest posts

Forum statistics

Threads
91,327
Posts
1,130,419
Members
24,133
Latest member
Nanohawk

Members online

Total: 530 (members: 1, guests: 529)

Share this page

Top