Recent content by metrojd

  1. M

    ZF Question for those that have had or do have Gear oil in

    Just picked up 1989 F Super Duty Dump the Trans has a PTO On it and it has Gear oil in it.. I know it should have ATF. just wondering how to or should I flush it some how?? Drove it for an hour or so,, actually seemed ok. appreciate any advise. Thanks John
  2. M

    Radiator suggestions

    Thanks for all the replies. Just bought the truck drove it a little over an hour to get it home and it overheated. When I looked at the rad it looks like it might have a small leak or 2 in the core. The biggest problem is the top talk looks like it split at the seam. There isn’t a lot of rad...
  3. M

    Radiator suggestions

    Picked up a 89 f superduty dump 7.3 Needs a Radiator. Were is everyone getting them from? Thanks Johm
  4. M

    ATS turbo 7.3 IDI

    Complete with ATS filter Box and opted AEM filter setup.
  5. M

    7.3 IDI parts

    Single mass flywheel, Injectors, Injector pump Injector lines Filter assembly. Any other pieces??
  6. M

    ATS turbo 7.3 IDI

    Pulled off my 1993 F450. Complete turbo set up. 800.00 Can text or email pics, Metrojd1@gmail Pick up preferred..
  7. M

    7.3 IDI parts

    pulled the 7.3 IDI out of my 1993 f450 Running,, leaked some oil. Email me what you are looking for. Metrojd1@gmail
  8. M

    More IDI PARTS... IM DOING A IDI TO PSD CONVERSION... IDI AND PPARTS FOR SALE

    I'm swapping the IDI out of my Rollback to a PSD. I'm in Pittsburgh,Pa Have completed motor, Radiator, ATS turbo Setup. Motor ran pretty good, has a few leaks. All must be picked up. Email me if you are interested. Thanks John Metrojd1@gmail dot com
  9. M

    Idi to power stroke

    The dash isn't all that bad. Pull the collum and the emergency brake pedal. The cluster and the kick panels. There aren't as many bolts as you would think. Un plug harness at kick panels including the grounds and The firewall. Disconnect heater cables or vacuum lines. I pulled my dash...
  10. M

    Idi to power stroke

    I did my CC Need all under hood wiring and IDM , dash wiring,PCM and bracket throttle pedal. When I did mine I put the power stroke and Radiator brackets in, overflow and washer bottle I used a 96 wiring in my 93. Had to change a few pins in the connector for the back lights.
  11. M

    Ats turbo vent hose

    I bought a grommet from Summit Racing and used PVC Pipe...
  12. M

    Hydra boost question

    Looks like a ps fluid and trans. Mix..... I just topped it off with mercon. Tried turning all the way right and all the way left to bleed out any air. Drove it about 8 miles seems fine but wines like its low.. Any suggestions? Thanks John
  13. M

    Hydra boost question

    What kind of fluid do I add?
  14. M

    Hydra boost question

    That's what I was hoping... What fluid will I need to add? I'm guessing to the power steering pump? Thanks. John
  15. M

    Hydra boost question

    Leaking inside the cab and once I park, it leaves a puddle under we're the driver side . Looks like it's coming from around the small beer can looking thing area.... Brakes and steering all seem good though..
See more

Latest posts

Forum statistics

Threads
91,310
Posts
1,130,155
Members
24,121
Latest member
720Diesel

Members online

Total: 608 (members: 8, guests: 600)

Share this page

Top