Yep thats what I need but having difficulty with the unwillingness of them to ship to the UK and Ebay automatically adds import duty which is not actually payable on second hand goods under $190 I did find one for $95 a few weeks ago but it would have been $300 with tax and shipping
Swap is going fairly good . Main problem was I had under estimated the length of the Cummins compared to the v8 10 inch body lift helped but still not much room for the radiator and intercooler . Going to extend the grille forward and make a Raptor style front end ,we need to change the...
The hole was in the block through to the water jacket quite high up on the right hand side of the v or valley water was leaking into the sump pan . I didnt fancy repairing it so I have junked the engine we need the truck to be reliable as its our wrecker . I am now fitting a Cummins 6BT 5.9...
Because I hate posts that never run to a conclusion . Update engine out and stripped dirty great big hole in the block caused by the age old corrosion problem . Half way through Fummis conversion . zf shifter tower desperately needed
Water pump off. the plate behind it looks good . Got bored when I worked out you have to remove the injection pump to get it off. Cant shift the balance/crank pulley at the moment
What I drained out was clear and looked good I only changed it because I had no idea what was in there . I used prestone as it has a good reputation here , What we drained out the rad and block to do the cooler was clear , I also tested it to check if it may have frozen by putting some in my...
Oh I do hope your right . I'v only had the truck 12 months I drained it when I got it and filled it with prestone to the correct mix. But I did mix it with plain tap water maybe is should have used distilled or de ionized not sure what you call it in the US
Oil cooler all tested on the bench and not leaking . Refitted to the engine and we have pressure tested the cooling system and it will not hold . Were do I go ?. I want to look at behind the water pump or in the rocker covers . which first ? I dont want to pull the heads in the truck . If it...
There were no gooves in the headers I did measure everything and all looked like it would fit. the pressure test which I will do tomorrow will give me the ultimate answer .
It is assembled and the bolts in to the block line up OK . But with the information that I may have the wrong o rings or older headers on a new type bundle I am going to make some blanking plates to pressure test it . We have tested the bundle to 30 psi and that held up so going to pop it in...
Thats a kind offer, Running American stuff in the UK can be a challenge . Luckily the fact that American vehicles are designed to run higher mileage and last longer is a help . Suspension , steering parts and normal stuff like water pumps are easy to get even next day . Lights are always a...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.