There is a separate box you have to purchase. I got mine from Mattsclassicbowties on ebay for $100 or from dakota digital themselves. https://www.dakotadigital.com/index.cfm/page/ptype=product/product_id=1192/category_id=694/mode=prod/prd1192.htm
SGI-100BT is the part number. But Im in the same...
So I tore into it a bit more today and the piece for the turbo drain popped out of the Bally pan. I got some new sealant and stuck it back in there. Hopefully it holds. Giving it some time to cure then try to start it again. As far as the oil pressure sending unit I have a Dakota dash and...
All right guys just looking for a little bit of help here so probably about a month ago I installed and R&D IDI turbo kit a new oil pan new rear main seal rebuilt oil cooler put new head gaskets head studs new valve springs and somewhere I have a massive oil leak got the truck running for about...
Alright guys so I recently installed new head gaskets comp910 valve springs and turbo kit from R&D idi. While filling fluids today I noticed I have a leak at the front passenger cylinder of coolant. I’m going to try to Retorque the heads and see if the issue goes away. Truck has yet to be...
@Booyah45828 I haven’t received any notifications about it either so I just wasn’t sure. Figured someone here might know. Not knocking on the guy I looked into his products a lot and decided to go with his.
He’s anyone ordered from Wes at Classic Diesel Designs? I placed an order about two weeks ago and haven’t heard anything yet? What’s the typical lead time for his parts? I ordered a 90cc Pump and Stock injectors both with cores returned after.
Aggie- They offer a basic kit without gauges and exhaust through Summit from what I’ve found. I’m just not great at welding and know I couldn’t fab something myself. Unfortunately the only Dp they offer separately is for the 7.3 factory turbo setup.
Aggie- I already have a 4 inch exhaust kit from dynamax designed for the 7.3na. I am only interested in this particular kit because it is $800 cheaper then with the exhaust and gauges. I was looking into the HyperMax but decided against it. I will take a look at the other kits suggested above...
I am in need of some help. I want to purchase the Banks Sidewinder turbo kit for my truck. I do not need the exhaust so I am looking at the 21042 kit that has everything except the exhaust, gauges and downpipe. Does anyone know the v band connection size for the exhaust side? I found a downpipe...
Hi, I am fairly new to the diesel game and my first one is an IDI thankfully. I inherited my truck from my late grandfather. It is a 1985 f250 single cab long bed 6.9IDI 4 speed soon to be a 5 speed. I enjoy working on this truck alot. Before i got my hands on it, she hadn't run in nearly 4...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.