-
-
DDirtyWood replied to the thread Power glow plugs thru a switch straight from the battery?.Maybe. For over 10 years I've run a manual GP setup with a DIY harness and no metal strap. No alternator problems or GP failures.
-
DDirtyWood reacted to nelstomlinson's post in the thread Power glow plugs thru a switch straight from the battery? with
Like.
Another option would be to abandon the existing relay in place, and install a heavy duty relay where you can reach it, light gauge... -
DDirtyWood replied to the thread Throttle Cable Receiver Connection keeps "Popping Off" of the Injection Pump Arm.At this point I think all the available throttle cables are aftermarket.
-
DDirtyWood replied to the thread Updating heater hoses.When I recently freshened up a lot of stuff under the hood I replaced all the heater hoses. I wen with the Gates 'Green Stripe' heater...
-
DDirtyWood replied to the thread 1989 7.3 voltage regulator on a 1986 Harness. Will it work? What is the 4th terminal.Sounds like a good time to just upgrade to 3g and ditch the extra wiring for the voltage regulator. I put one of these...
-
DDirtyWood replied to the thread Tachometer jumpy when using hvac.Try tapping on the tach display to see if the problem is mechanical. I've seen gauges that were off but a good tap would bring 'em...
-
DTrue But as it has sat for a while, I would fill the cylinders with secret sauce and ley em sit. I always advocate for loading one down...
-
DDirtyWood replied to the thread 7.3 idi injection pump leaking from advance piston..Pumps can and do go longer but performance drops off. Since the IP is lubricated by the fuel I would guess that a pump ought to last...
-
DDirtyWood replied to the thread 7.3 idi injection pump leaking from advance piston..The injection pumps have an expected service life of 100k so if you're at 133k you're on bonus time already.
-
DDirtyWood replied to the thread Should I buy this truck?.Well, if you're bored I guess it could be fun but it sure sounds like a lot of work if the body is the only good part. The lower...
-
DDirtyWood replied to the thread 7.3 idi injection pump leaking from advance piston..I have never dug into an injection pump but I would have to wonder whether or not the leak was worth fixing since those sorts of...
-
DDirtyWood replied to the thread Exhaust Manifold Removal.I recently replaced both exhaust manifolds with new Dorman models and they worked just fine, however, one package was missing the studs...
-
DDirtyWood reacted to icanfixall's post in the thread 7.3 idi throttle position sensor question with Like.
The tps came to be when the first E4OD went into the trucks so that was probably 1989 which is the first year trucks had the E4OD. I'm...
-
DDirtyWood replied to the thread Best Return Line Setup for Peterson CNC Caps? (1/4" vs 3/16" Hose).This is the fitting at the injection pump to convert to JIC...
-
DDirtyWood replied to the thread Tach cutting in and out.https://www.usshift.com/usq4rd.shtml I'm on the fence about going this route myself.
-
-
Loading…
-
Loading…
