DirtyWood's latest activity
-
DDirtyWood replied to the thread Tach cutting in and out.I think a lot of signs are pointing towards the TCM as the next point to examine.
-
DDirtyWood replied to the thread Tach cutting in and out.When the tach goes wonky do any other gauges fluctuate?
-
DDirtyWood replied to the thread Tach cutting in and out.Is the signal cutting out and causing shifting problems with the E4OD?
-
DDirtyWood replied to the thread New 3g alternator--High voltage and then low voltage, bad regulator?.UPDATE: Installed a new voltage regulator and now the new alternator seems to be working normally. 14.4v charge at idle.
-
DDirtyWood replied to the thread Protective Seat Covers for 1993 F250HD.I recently investigated seat cover options, admittedly for a bench seat, but after looking through a handful of websites I was going to...
-
DDirtyWood replied to the thread While the truck sits unused.. can I/should I soak the cylinders?.If you want something stronger than SeaFoam I would check out "Kreen" from Kano Labs.
-
DDirtyWood replied to the thread Best Return Line Setup for Peterson CNC Caps? (1/4" vs 3/16" Hose).I use the return line routing as suggested by Classic Diesel Designs and the Peterson caps have worked well for me so far. Basically...
-
DDirtyWood replied to the thread "Re-Priming" Fuel System on 1993 7.3 IDI.You should be able to pull fuel up to the filter head--the injection pump is capable of sucking fuel from the tanks without a lift pump...
-
DDirtyWood replied to the thread Part I’d help.Well I've taken apart the bucket seats from an OBS several times and never noticed any hard foam. I would be inclined to think it came...
-
DDirtyWood replied to the thread PSA: For those replacing 4wd front shackle bushings with polyurethane, check your shackle first..I would add a note regarding the potential for squeaks when using poly bushings. If I had it to do over again I would never have used...
-
DDirtyWood replied to the thread Missing Bracket or Unused Holes? (Intake Manifold Question).And it's also where part of the Banks Sidewinder air filter assembly bolts on.
-
DDirtyWood replied to the thread 1989 Ford f-350 7.3L IDI 4x4 (2900) original miles.I saw that rig on the Marketplace and was tempted but realized it was way more of a project than I could handle for a while. Cool truck...
-
D@rreegg you nailed it precisely. So far ive only let it occur for at max two seconds before pressing the clutch in and letting it return...
-
DDirtyWood replied to the thread New 6.9 IDI - Deciding if worth resurrecting or not.It shouldn't be very hard to apply for a new title. Paperwork gets lost or damaged so i would guess all states have some procedure to...
-
DDirtyWood replied to the thread Which replacement injection pump?.I recently installed injectors and RD-80 injection pump from R&D IDI and could not be more pleased so far. Only a few hundred miles on...
