What do your gauge setups look like?

[OLDBULL8]

There was someone on here that showed how to make a custom gage pod. Was really neat. Might search, "How to make a gage pod"

 

[KZF250]

You must be registered for see images attach

 

[sjwelds]

Many of you know this, but I am running a Hypermax combo pyro/boost-gauge-in-one setup. I also bought the aluminum mounting cup from them. I have it up on top of the dash right beside the A-pillar. I really like it.

Here's a link: http://www.gohypermax.com/ProductDisplay.aspx?ID=eb85a449-aa86-42aa-91fe-d25bbae86ebf

 

[Thewespaul]

Many of you know this, but I am running a Hypermax combo pyro/boost-gauge-in-one setup. I also bought the aluminum mounting cup from them. I have it up on top of the dash right beside the A-pillar. I really like it.

Here's a link: http://www.gohypermax.com/ProductDisplay.aspx?ID=eb85a449-aa86-42aa-91fe-d25bbae86ebf

wow thats a a great guage wish i had seen that before buying my egt

 

[TahoeTom]

I made some angled pods using 2" ABS pipe. I think I cut them 22.5* I had some unused space above the radio, made a metal bracket and cut down the factory plastic. I don't have AC but have an AC dash, so used one of the AC vents for my water temp.

 

[catbird7]

You must be registered for see images attach

Very crude gauge set-up that was in my current project truck. The entire dash will be removed for replacement with grey dash. Four of these gauges will be moved to a four gauge pod on pillar. Pyro, 15psi Boost, mechanical oil pressure, mechanical temp.

 

[Thewespaul]

You must be registered for see images attach

Very crude gauge set-up that was in my current project truck. The entire dash will be removed for replacement with grey dash. Four of these gauges will be moved to a four gauge pod on pillar. Pyro, 15psi Boost, mechanical oil pressure, mechanical temp.

hey it works!

 

[Wvdirtroad]

Oldbull- where did you get your pillar, and does it come in differen colors? Looks pretty clean.

 

[catbird7]

I bought my four gauge pod from "Glow Shift". It's actually designed for OBS truck (1992 - 1997) however 5 mins of work with dremel tool and it fit my brick. The only color was grey. Around $50.00 if I remember correctly........

 

[rdoimages]

You must be registered for see images

This is mine.


Sent from my iPad using Tapatalk

 

[FORDF250HDXLT]

autometer/on the pillar from top to bottom;
oil pressure
water temp
trans temp

banks-dynafact/below the ash tray from left to right;
boost
pyro
oil temp (still no sending unit hooked up though.i put it off cus i know my aux cooler cured high temps.)

exact replica in log truck,minus oil temp.

 

[cpdenton]

My favorite gauge location. Pyro on top of the steering column. Right where it is in view of the tach and speedo.

I also have a 4 gauge pillar pod filled with stuff.

You must be registered for see images attach

 

[icanfixall]

I made this many years ago.

 

[The Warden]

There was someone on here that showed how to make a custom gage pod. Was really neat. Might search, "How to make a gage pod"

I remember alienturtle doing a writeup here: http://www.oilburners.net/forums/showthread.php?43603-How-to-Make-Your-Own-Fiberglass-Gauge-Pod ...was this what you were talking about, or is there a second thread floating around as well?

You must be registered for see images attach

Very crude gauge set-up that was in my current project truck. The entire dash will be removed for replacement with grey dash. Four of these gauges will be moved to a four gauge pod on pillar. Pyro, 15psi Boost, mechanical oil pressure, mechanical temp.

How are you planning to work the pillar four-gauge pod with the spotlight? I'm considering doing something similar, so would love to see what you come up with (or what you came up with)...thank you!

Or, for that matter, has anyone else done pillar-mounted pods with an A-pillar mounted spotlight? Any pictures?

 

[OLDBULL8]

That's the only thread that I know of on how to build a gage pod.