WTB: Turbo kit for 6.9

[jaluhn83]

Also FYI, the banks square box kits had a different up pipe and turbo bracket for a C6 & T-19, possibly a different one for the ZF5 as well. I know a C6 will not work with a T-19 or ZF. The T-19 should fit a ZF, and I expect a ZF and T-19 would be interchangeable. Probably a C6 would work on a E4OD too. The issue if the bracket, the uppipe has a bolt bolt flange similar to the exhaust manifolds. The manual trannies have a bit of a shelf where the bellhousing comes back about 3/4" and then drops down. The C6 is a smooth drop. On C6 mounts the pipe is setup to just clear the bellhousing. As a result, it hits the manual bellhousing, and since it's right at the flange you can't really bend the pipe or get around it to make one fit.

 

[terkaa]

I believe we have deal with John. And TYP4 you will receive banks turbo for rebuild/upgrade soon.


Tero

 

[gingrass179]

did you find a kit?

 

[terkaa]

gingrass yes I did. I bought old style banks kit from John. Turbo itself will visit TYP4 for rebuild/upgrade.

 

[typ4]

gingrass yes I did. I bought old style banks kit from John. Turbo itself will visit TYP4 for rebuild/upgrade.

sounds like a plan.

 

[terkaa]

sounds like a plan.

Yes we have had some delays because John has been loaded with work. He promised to ship parts out on 25th. So you will receive turbo around 28th.


Tero

 

[typ4]

I am also buried at work, 12 +hour days. But we will get it handled.

 

[terkaa]

I am also buried at work, 12 +hour days. But we will get it handled.

Don't worry. These parts are for my RV engine rebuild/upgrade. I won't be needing this RV before next summer. So we have lot of time to get pieces together

 

[terkaa]

Don't worry. These parts are for my RV engine rebuild/upgrade. I won't be needing this RV before next summer. So we have lot of time to get pieces together

Btw. What is your opinion in Coating pistons and replacing valve seats? ie. http://www.gohypermax.com/ProductDisplay.aspx?ID=d972ec51-fe7e-4342-b01b-8c23d579f065

Or are these waste of money for RV ? Also Hypermax seems to have rod/main bearings and also piston rings that are advertised "better and stronger" opinions?



Tero