Several IDI's for sale - can deliver

Kizer

Supporting Member
Supporting Member
Joined
Mar 22, 2007
Posts
722
Reaction score
291
Location
Denton, Texas
I'm moving soon. As a result I have to "thin the herd". I'll listen to reasonable offers if you think I'm off on the prices.
I can deliver any of them.

1985 F250 6.9 4x4 T-19 Tan

I bought the truck couple of years ago. I’ve never had it on the road.

When I bought it, the PO had removed the pump and housing. I installed rebuilt pump and injectors.

I did not get it titled in my name, I do have the (blue) title and bill of sale from PO.

The truck is from Vernon TX – NO rust … pretty clean truck.

I didn’t put a $ on it because I need to get the timing right and see how it runs. I used the “putty knife” method when installed the pump & housing … I’m off a tooth. If you’re interested in taking it “as is” shoot me an offer. I’m thinking in the neighborhood of $2000

· IP and Injectors rebuilt by Able Injection, Lewisville TX

· 95% Michelin LTX

· New group 31 batteries

· New windshield

· Electric lift pump

· New GP’s

· A/C - needs service


1985 F250 6.9 SC ZF5 Sidewinder Luk SMF $1800.00 Red & Tan

· Block is cracked at heater

· Needs tires

· Super Clean Truck

· Blue title in my name


1987 F250 7.3 SC ZF5 Custom Interior $3800 Blue & White

· I bought the truck in Arkansas a couple of years ago, drove it to N Texas, pulling my F150, it ran great.

· I have Arkansas title, not in my name yet, and bill of sale from PO

· A/C works well

· Minor rust RR cab corner

· Tires are OLD

· DMF is busted – I have the new Luk SMF parts on hand. I may get a chance to install…?


1991 F350 7.3 CC SRW – parts truck or rebuild – NO rust $900 White

· ZF5 truck – no transmission

· 7.3 probably needs to be torn down as it had been sitting with open intake when I bought it

· I have title (blue) and bill of sale from PO

· Sidewinder, sitting in cab


1986 F250 6.9 C6 $700 Gray

· 7.3 swap – Cavitation victim

· C6 was rebuilt about 20k before cavitation disabled the truck

· Pretty rough old truck. I used it hard for 10+ years. No major body damage, no rust

· I’m having trouble finding the title for this one. It won’t be a problem though, as I have owned the truck since about ‘03

I'll get the title work started (the trucks not in my name) if you're interested in the truck and that's important to you.

All the trucks are in Denton or ******.

I can send more pics.
You must be registered for see images attach



You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 
Last edited:

Kizer

Supporting Member
Supporting Member
Joined
Mar 22, 2007
Posts
722
Reaction score
291
Location
Denton, Texas
I'd really like these trucks to go to someone in our community.
As said before, if you think that I'm out of line on pricing, make me an offer. I can & will deliver any of them.
"Package deal?" All of the IDI's + the 2003 F150 Lariat (different post) for $9000?
I can't take all of them with me ... I surely don't want to scrap them (same as CraigsList IMO).
Thank you,
Kizer
 

Thewespaul

Supporting Member
Supporting Member
Joined
Jul 27, 2015
Posts
8,796
Reaction score
8,058
Location
Bulverde, Texas
I wish I could swing it right now, but Im bringing in 20k in equipment into the shop right now and funds are tight, otherwise Id take you on that package deal. Ill pass it on to some local customers who may message you.
 

Kizer

Supporting Member
Supporting Member
Joined
Mar 22, 2007
Posts
722
Reaction score
291
Location
Denton, Texas
Great deals on these, I wish we could find deals like this in MI

Thank you for your reply. If I have to resort to CL or Truck Trader, they'll be listed for substantially more. My concern is that they go to some one that appreciates them / will use them.
I hate to see good old iron go to waste.
Maybe a "meet half way", solution to shipping, would save a buyer there a good portion of shipping. I'd (potentially) be willing to do that.
 

BrianX128

Supporting Member
Supporting Member
Joined
Dec 3, 2015
Posts
1,798
Reaction score
540
Location
Pittsburgh
That top bullnose is incredibly clean and I've always wanted one with a back seat. If I didnt already have what I have I'd love to have it. I hope someone from here or the idi community in general finds them and is interested.
 

Kizer

Supporting Member
Supporting Member
Joined
Mar 22, 2007
Posts
722
Reaction score
291
Location
Denton, Texas
That top bullnose is incredibly clean and I've always wanted one with a back seat. If I didnt already have what I have I'd love to have it. I hope someone from here or the idi community in general finds them and is interested.

Thank you. I really love that truck. I have to make some tough choices ...
 

HogLeg Bill

Registered User
Joined
Jun 27, 2019
Posts
5
Reaction score
0
Location
New York Texas
Hi the 1986 F250 6.9 C6 $700 Gray is it still available? Highly interested if the title can be fixed. Please pardon me but I'm new to this, the 6.9 cavitated and a 7.3 is in it now? and runs? Im down near Athens Tx.

The F350 maybe of interest too.. hmm
 
Last edited:

Kizer

Supporting Member
Supporting Member
Joined
Mar 22, 2007
Posts
722
Reaction score
291
Location
Denton, Texas
Hi the 1986 F250 6.9 C6 $700 Gray is it still available? Highly interested if the title can be fixed. Please pardon me but I'm new to this, the 6.9 cavitated and a 7.3 is in it now? and runs? Im down near Athens Tx.

The F350 maybe of interest too.. hmm

They are both available. The grey truck has been titled in my name, just lost it somehow. The F350 has never been titled in my name but I have the title and bill of sale from the po.

Unfortunately the 7.3, that's in the grey truck, is cavitated. It does NOT run.

Thank you,
Kizer
 

Forum statistics

Threads
91,217
Posts
1,128,519
Members
24,045
Latest member
Ramtough01

Members online

Top