Search results

  1. C

    1990 F350 dump bed.

    Need more info! Is it IDI? Auto, manual? rear end ratio? What needs replacing? more info!
  2. C

    95 dodge 3500 cummins

    Sellin my 95 3500 club cab 4x4 dually. its a 5speed, was rebuilt 80K +/- ago when the P.O. had it. Needs either timing or injectors. It was timed to 17.5* but it may have slipped. It does not like to run when its cold (at first anyway) lots of blue smoke till warm. So either sticks or timing. It...
  3. C

    first off hi guys and i have a fuel prob i need help

    Yea check the preheater, thats before the lift pump. Could be getting clogged. But I might be inclined to say the LP is bad. Bleed the system, dont try n start the truck, crack open the bleeder on the fuel filter housing, and pump the LP and see if you got any fuel comming out of the bleeder.
  4. C

    Need help with fastener tork ?

    I will have to look at my FSM and get back to you. It is at my shop unfotunatly. I think 80 ft lbs? That sounds correct, but dont quote me.
  5. C

    WTB. Gen1 turbo

    Any diesel shop can get you a rebuild kit. Just get the numbers off the tag, and take them to a diesel shop. OR look around for a used WH1C or HX-35 for a better then stock, stock, replacement. I got one of my WH1C for the price of shipping, they are out there. Any of the Cummins specific forums...
  6. C

    want more power with little smoke.

    If you are looking for power off the line, you need a 0 plate, it is the most agressive. Take out that number 8 and grind it flat. The AFC apring kit is not something you want for little or no smoke, the AFC is what limits fueling under no/low boost conditions. So if anything you will want to...
  7. C

    1990 D350 Wheel upgrade?

    Dodge wheels are hub centric. Meaning they are centered on the hub. Dodge uses a 4 3/4 hub. GM is 4 1/2. Dodge I believe released a TSB stating to use 2 conical nuts to truely center the wheel, bolt on with the other 6 nuts, remove the 2 conical, and place the last 2 on. All dodge to current is...
  8. C

    WTB. Gen1 turbo

    "baby" H1C on a non IC 1st gen Cummins. I would suggest either a rebuild kit (cheap) or finding a WH1C or an HX-35. I would have to think on it, but I have a WH1C setting on the shelf, but I also have one in my current truck so im thinking spare. My spare needs seals too.
  9. C

    Cummins 12 valve cylinder head for sale

    The only difference in 12 valve heads are the early 1st gen (non IC) 89-91.5 and later 1st gen (IC) 91.5-93 The early 1st gen had 9mm injector ports that are prone to cracking. Which head is it? 9mm or 7mm injector port?
  10. C

    Anyone have a B&W Hitch to sell for 80-96 F250/350 w/overloads. Kit#1110?

    I hear ya there! Well, it looks like I will be hangin on to em, my trailer dealer wont give me crap for em and he wants wayyy too much for what I want. So give me a hollar if things change.
  11. C

    Anyone have a B&W Hitch to sell for 80-96 F250/350 w/overloads. Kit#1110?

    Yeah a gooseneck is a much better trailer overall, higher hauling capacities, better trailer control, from general drving down the road to parking the trailer, much more even weight distribution on the truck. A gooseneck trailer, brand new can be as little as 3000 dollars depending on what you...
  12. C

    Anyone have a B&W Hitch to sell for 80-96 F250/350 w/overloads. Kit#1110?

    I have one. I got it a few years ago, and it is JUST the frame plates. You would need the center piece, but I am looking to off load it. I priced the center plate at a local dealer last year for 250 bucks. It is the NON overload version, BUT includes instructions to make it fit with overloads...
  13. C

    95 Dodge Ram 12v ext.cab 4x4 dually $2500

    ohoh pick me pick me!! PM commin yer way
  14. C

    is this a good deal??

    its on the money for a p-pump converted 1st gen with those kind of mods. Offer 5K
  15. C

    Banks Automatic Turbo Kit

    What about shipping costs, and does it include the tranny shift kit module?
  16. C

    FS: 92 F250 Xcab IDI 4X4

    The only pictures I have of it right at the moment are on my Webshots page. Clicky the link in my Sig. I will work on getting some more, granted I get home from work while its still daylight. Also the Tires arent too bad, they'll make it through winter, but spring time if it was being...
  17. C

    FS: 92 F250 Xcab IDI 4X4

    Im posting this truck up as a PARTS truck, it needs a lot of work to be road worthy again. It is a 1992 Ford F250 XLT extended cab 4x4 automatic. 182K miles runs GREAT Grey interior, bench seat sliding rear window, class III tow hitch and 7way plug. I know im going to forget things it needs...
  18. C

    Looking for a bolt in Goose neck hitch for an OBS Ford.

    I have a B&W that I never installed for my 92 that I dont need. Well half of a B&W anyway, I have the frame mounts, I priced the center plate and its 200 bucks +/- a few bucks. Id sell the frame mounts for 100 bucks plus shipping. Everything is there including the instructions n hardware. They...
  19. C

    Parting a 94 IDI F250, take a look!

    What have ya got from the dash left? Im in need of the Vents, and guage surround bezel. (the bezel the WTS light dummy light center mounts onto.) Im somewhat local, Binghamton NY. I need a Bezel BADLY. Its a rather delicate piece too. Hows bout that T-case shifter assy? What rear does it have...
  20. C

    how to work the high idle box

    oh. sorry, I forgot to put that in. its for a 99 F550. I acctually found the info I needed on it, man I love that AIC for driving the PTO!
  21. C

    programmer advice needed

    Sweeeet, thanks guys!
  22. C

    how to work the high idle box

    I got an idle box in my truck at work but cant seem to figure it out. The glove box books are long sence gone. How do I get it to set my high idle, i need to drive the PTO and 650 RPM does a good job, but I really do need more then that. And how do I adjust the idle speed on the box? thanks...
  23. C

    programmer advice needed

    Hey guys, need some advice, my work truck if a 99 550 with a 7.3 and I need more power badly, im loaded all day long at 18K and even with the monster code 93 rear end gears and a 6 speed, its still just gutless. So, I need a plug n play PROGRAMMER. Id love an edge box, but need an ECM...
  24. C

    worthless tires!

    Hey guys, I got me a new job n my work truck is a 2wheel drive F550. And the places I go I either need GOOD mud tires or 4x4 (I'll get the tires I want before a new truck sooo....) Anyone got some good mud tire options for these 19.5 wheels?
  25. C

    first gen dodge parts for sale.

    The t-case is a 205.

Latest posts

Forum statistics

Threads
91,301
Posts
1,129,947
Members
24,110
Latest member
Lance

Members online

Total: 630 (members: 3, guests: 627)

Share this page

Top