Search results

  1. KyleQ

    slow cranking..shot starter?

    I've got this starter - http://www.dbelectrical.com/p-5652-ford-truck-case-69l-73l-diesel-starter-f250-f350-1985-1994-hi-tork.aspx Check out this ~-10*F cold start. Skip tot he 43 second mark- http://youtu.be/k2RArHvgFN0?t=43s
  2. KyleQ

    Water pump explosion!

    Yeah - luckily my brother's boss was scrapping some stuff that had been sitting for a long time and one of them happened to be a F250 IDI truck and I grabbed the rear D70 with powr-lok, the chrome 8 lugs with good tires, the injection and glow plug wiring, the radiator, shroud and some other...
  3. KyleQ

    Water pump explosion!

    I can get a Ford pump for under $85 - I'll go that route.
  4. KyleQ

    Water pump explosion!

    I get damn near employee pricing @ Oriley Auto - I use RockAuto if I plan ahead, but having a store only ten min away where everyone knows you by first and last name and what vehicles you are working on can't be beat. If I need to use the warranty I don't have to mail anything anyway - I did...
  5. KyleQ

    Looking to buy a 2003 Excursion with a 6.0

    Well I thought I would come back and report on my purchase - its been GREAT! I've run this beast on a 350 mile round trip pulling a snowmobile trailer full of ice fishing gear and a stuffed to the gills interior with five people without a hitch, recently did a 450 mile round trip with four...
  6. KyleQ

    1998 E4OD on the outside... ...wait a minute!

    Nice choice on the trans cooler - http://www.transmissioncoolers.us sells the Tru-cool coolers and they are top notch!
  7. KyleQ

    Water pump explosion!

    Thanks - he didn't do any damage, I bought the truck from him some time ago and I know he kicks himself every time he borrows it from me - always says it drives so damn nice! Sad thing is that it does drive nice, the steering is much better than in 03' Excursion, that has about 2" of side to...
  8. KyleQ

    King pin or ball joint

    Kingpins are easier to replace than balljoints - ANYONE can do them. East Coast Gear Supply is where you want to get your rebuild parts, spend the $10 on the kingpin removal tool as well. It is basically a piece of hex bar that allows you to use a socket. Use a cutoff wheel and cut a small...
  9. KyleQ

    slow cranking..shot starter?

    I third the hi-torque from DB Electrical! I've got fresh batteries and it fires up like a mofo! Seriously, to me it sounds like a new 24v Dodge cranking over - If work didn't block YouTube I would have a before and after video for you, but the DB starter cranks it stupid fast. When the...
  10. KyleQ

    Wheel bearing change.

    The trick with any race installation islistening to the sounds that are made when you are hammering it in. When it bottoms out the pitch will dramatically change - rotate the punch around and listen to make sure the same noise is heard all the way around the race. If it sounds good, it is...
  11. KyleQ

    Water pump explosion!

    Here is the setup- Wow - never seen one this bad before!
  12. KyleQ

    Water pump explosion!

    I let a friend borrow my truck to pickup a deuce and a half and (luckily) it let loose before he picked up the trailer. It chucked a belt, took out the fan shroud and there is literly inches of side to side play when you grab the fan :eek: I got to test out the new tow pig, 03' Excursion...
  13. KyleQ

    New IP time!

    Did a -4 *F cold start today - I was impressed. Block heater was plugged, gave it 10 seconds and let er rip! http://www.youtube.com/watch?v=4IOlIKqvCs4&list=UU3xxCTsaQ9CzNOSpDLQkxoQ&feature=share
  14. KyleQ

    Looking to buy a 2003 Excursion with a 6.0

    I've got to put an armrest cover on the driver side. The heated seat doesn't work wither... so I've got to see what causes that. Overheat compass is dark as well - buttons did nothing. I need a new rear bumper and some tiny touch ups on the paint to keep it clean and I think I'm good.
  15. KyleQ

    Looking to buy a 2003 Excursion with a 6.0

    I'l take some better pics after I drive it home and wash it :D
  16. KyleQ

    Looking to buy a 2003 Excursion with a 6.0

    Potato? Note 3 - probably crap on the lens. He put it in his 08 F350....
  17. KyleQ

    Looking to buy a 2003 Excursion with a 6.0

    Got it right in the ball park of where I wanted to be before he put tires on it, so I think we have a deal. More pics, because everyone loves pics. Drove really nice, shifted great, brakes are solid. Not a speck of oil anywhere to be found on the bottom of the engine and the trans looks...
  18. KyleQ

    Looking to buy a 2003 Excursion with a 6.0

    Going to look today - doesn't look like he had much on it besides a scanguage (that is gone) and no tune (odd as he removed the EGR). Got more pics- Arm rest cover is $50 and 10 minutes, so I'm not butthurt over that.
  19. KyleQ

    Got Stuck... Bad

    Oh, ok. Never seen these before - that is how it works on the superdutys and Bronco's....
  20. KyleQ

    Got Stuck... Bad

    Yeah - manual hubs. Never had auto's on anything... Auto hubs pull the clutch in via vacuum - as long as the seals are good and the hub isn't improperly serviced, they work great.... until you push the button and hammer down only to get buried. F those things-
  21. KyleQ

    Got Stuck... Bad

    If you have over a grand to toss at it, sure. The MSRP is $1,182.82 USD cookoo
  22. KyleQ

    Battery cables, good source?

    Nice- I like the washer trick!
  23. KyleQ

    Got Stuck... Bad

    4WD is really two wheel drive plus - 2WD is one wheel drive plus. I drove for two years with the hubs locked in - no ill affects, including driving 14 hr+ in 4wd at 80mph. MPG suffers, but at ANY SPEED you can toss it into 4WD instantly as long as you are not spinning the rear tires. When the...
  24. KyleQ

    Looking to buy a 2003 Excursion with a 6.0

    My 6.9 stays plugged in all the time, so that isn't a big deal for me either. Normally I would run an Oaisis report on it, but I know its had an engine swap and a ton of work done - should I be worried or not?
  25. KyleQ

    Looking to buy a 2003 Excursion with a 6.0

    I only know of what I've read on what people do to fix and prevent failures of the motor (EGR, HPOP, coolant filters, etc etc) but I know nothing of the FICM - should this be a worry? With the Edge CTS I should be able to monitor everything I need to, correct?

Forum statistics

Threads
91,315
Posts
1,130,194
Members
24,121
Latest member
720Diesel
Top