Search results

  1. zrexryder

    Will a van turbo fit a truck?

    hypermax turbo that came off a 87 ford E350 van with the 7.3 idi diesel with auto
  2. zrexryder

    Will a van turbo fit a truck?

    Wondering if a van turbo with an auto trans will fit?
  3. zrexryder

    I'm a dum@$$

    I've run 3 sets of those tires because there cheap an easy to find, I to have had that chase the vibration/wobble. I found that when my truck sits too long a week or more the tires (soft rubber) where getting flat spots and would cause havic until the tires round back out from driving, You could...
  4. zrexryder

    Flywheel has stripped holes

    I've used timesert its like a heli coil but way better. http://www.timesert.com/
  5. zrexryder

    How important is a fuel line heater?

    Thanks guys.
  6. zrexryder

    How important is a fuel line heater?

    I live in cali, my inline heater shorted so its disconnected. Will this cause me problems now that getting cooler?
  7. zrexryder

    school me on the cdr valve

    Well not so, it does regulate, Instead of blowing air through it, try testing it with a shop vac on the vacuum side. it will close the valve until pressure is applied from the crank case side of it, by design it won't stop a possible run away engine ,if its got that much blowing by it will over...
  8. zrexryder

    craigs list find

    http://sacramento.craigslist.org/rvs/2574409004.html
  9. zrexryder

    when it is done right.....

    I like to keep it simple, I use mp39, charge it til my disharge air temp 45' and my suction line at the comp is beer can cold.
  10. zrexryder

    A/C problem

    sounds like it mite have been over charged. a little warn on the vent temps are suspect. I just replaced mine on my 01 tahoe last week also. driving vent temps are 47'
  11. zrexryder

    pick n pull hydro boost installed today

    heres some pics. all i had to modify was drilling the bottom holes on the booster to match the fire wall and use 2 inch spacers, then I up sized the mounting bolts to 7/16 and wrap the gap with some insulation. all the rest was plug and play. I still can't believe how easy this swap was and how...
  12. zrexryder

    pick n pull hydro boost installed today

    Picked up the chevy hydro booster $11, got the hoses and mics from kragen $50. It took 2 hours and 5 gallons of sweat( hot day here) to install thanks to this sites great info. wow the brakes on this truck never ever work this good. got some pics I will post later.
  13. zrexryder

    Transmission Swap

    c6 + GV , I like the rock solid reliablity of the c6, +parts are cheap and everywhere, now put a gv behind it, golden.
  14. zrexryder

    Big spare tire mounting?

    I was at pick n pull today and was checking out bronco spare tire mount to use to hold up my 37 inch tire.Has anyone ever mounted a bronco sytle spare tire mount on there truck?
  15. zrexryder

    Ebay turbo

    is it worth looking into? http://cgi.ebay.com/ebaymotors/Banks-Turbo-Kit-6-9-7-3-IDI-Ford-Diesel-_W0QQcmdZViewItemQQhashZitem3cb8a69b3bQQitemZ260795964219QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessorieslooking
  16. zrexryder

    my dyno numbers are in.

    I've always considered dyno tests (as well as any other forms of testing) one of the more interesting parts. As a "do it myself" sort of guy as well as someone who actually runs tests, I'm always interested in the effects of design change. However, as the years have gone by, I find myself less...
  17. zrexryder

    custom intake manifold?

    Talked with a guy that can water jet the flanges out of 3/8 alum, as for clean air something like the filter in this pic. cutting the hood and doing the ram air thing.
  18. zrexryder

    custom intake manifold?

    Has anyone ever seen one? I was at my friends shop looking at his sprint car engine and thought it wouldn't be that hard to fab up and intake like the one on that motor. Found some tubing now just need to make the base plates. Do you think trying to get more flow is worth the time? going on a...
  19. zrexryder

    Flanges

    can you get a set of intake flanges made?
  20. zrexryder

    Lift pics

    Pick and pull $100 4 inch ttb lift bolted and welded in/ F350 cast iron 4 inch blocks in the rear(ruff country?) all new grade 8's and u bolts hum v 37x12.5 tires. Rides like a skate board.
  21. zrexryder

    After market gauges?

    The reason I was asking is because the stock ones are electric and I hear that they aren't reliable, so I'm going to do an upgrade next weekend and wanted your see what being used.
  22. zrexryder

    After market gauges?

    Whats better,Mechanical with a hard line or electrical with sending units?
  23. zrexryder

    Which pump? Holley or carrier?

    I'am going to electric, which pump do you guys recommend? can you explain the pros an cons on each?
  24. zrexryder

    Problem with injection pump on 6.9

    your welcome
  25. zrexryder

    Problem with injection pump on 6.9

    Just got home from work, sent you an email from my home email.its waiting for you;Sweet

Latest posts

Forum statistics

Threads
91,318
Posts
1,130,214
Members
24,125
Latest member
REM70

Members online

Total: 667 (members: 11, guests: 656)

Share this page

Top