Recent content by furfishgame

  1. furfishgame

    Re ring in frame?

    Lol yeah i got the hint. I am nkt close to needing a rebuild yet but was curious, since im rebuilding both axles and putting a new tranny in if i could do an inframe. Ive done in frames on my semis before, but those are easy.
  2. furfishgame

    Re ring in frame?

    Need to do head gaskets, and was wondering if you can re ring (piston rings, maybe main bearing, all new gaskets etc) in frame? I dont have a cherry picker or stand to pull the engine, and dont want to buy them as its not that important. 1990 7.3, rajay turbo. Thoughts? Do’s and donts?
  3. furfishgame

    Clutch pedal slop

    Thanks pelky! I was doing some reading and just ordered the heim joint fix. Ill check what you stated!
  4. furfishgame

    Clutch pedal slop

    anyone here know how to fix slop in the clutch? I have roughly 8 inches of travel, 4 of which is all slop. Having a hard time engaging gears so im assuming this might be part of the problem. I Ordered the heim joint fix. Anyother stuff to look for?
  5. furfishgame

    7.3 idi manual?

    Got mine for 40 each i think
  6. furfishgame

    7.3 idi manual?

    I have a haynes but you have to get the diesel tech book as well as the one for the truvk it self, mine covers 6.5 and 6.5 chevys, 6.9 amd 7.3 idis as well as obs 7.3 powerstrokes.
  7. furfishgame

    Accurate diesel injectors, turbo vs non.

    I got the stanadynes, the last set. Thank you all
  8. furfishgame

    Accurate diesel injectors, turbo vs non.

    Thank you guys. Now, i am taking a look at idiperformance, he has stock and also stage 1 injectors. What difference am i looking at here? Im more than likely going with stock anyway so it prolly doesnt matter
  9. furfishgame

    Accurate diesel injectors, turbo vs non.

    I am looking at accurate doesels reman injectors for my 90 IDI, i recently put a turbo on it, and with 220000 on my stock injectors its time for some fresh ones and a IP as well. (Going witm a baby moose for that tho) My question is what is the difference between the turbo and non turbo...
  10. furfishgame

    Bear with me, please...I'm new to this!

    On the passanger side of your engine below your vac pump (which is directly below your alternator) is your lift pump, that brings fuel up to 3-4 psi, through your fuel filter up to your injection pump, check that for leaks. Youll see a metal line comming up to your filter, And a rubber line...
  11. furfishgame

    Just installed turbo, Pre fill turbo with oil?

    Now im scared. How do i go about throughly cleaning it? Yes i came off the small plug by the oilcooler... Might that explain why i hear pretty much no turbo noise at all when i rev it up. I hope i didnt eff something up yet. Drove it for about 15 minutes home last night and the same back to...
  12. furfishgame

    Just installed turbo, Pre fill turbo with oil?

    I finagled a rajay 300 onto my 7.3 idi, before i start it my question is, 1. Should i pour some oil into my turbo feed line and into the turbo it self fo i dont burn up my seals before oil makes its way there? Also, my oil return line is about level if not slighly higher going into my valve...
  13. furfishgame

    Squeaking comming from rear end?

    When i back up what sounds like my rear passanger tire area squeaks, and occasionally does it when i take off going forward.. U joint going out? Any other ideas? Sounds stupid but it sounds like the squeak is "rotating" with my tire....
  14. furfishgame

    Heavy Crap

    lol yeah
  15. furfishgame

    Heavy Crap

    I got a piece lf 12 inch plate steel.. Same length as my bed, width is the narrowest part between wheel wells. Beauty of that is it doesnt take any room. Granted i have a 4x4 but i like the extra traction when plowing.
See more

Latest posts

Forum statistics

Threads
91,310
Posts
1,130,159
Members
24,121
Latest member
720Diesel

Members online

Total: 571 (members: 15, guests: 556)

Share this page

Top