87 Crew Cab w/ 6 doors

[IDIoit]

Yea, those are gussets for the bottom of the winch plate. I didn't trust the 1/2" plate butt welded to the front Xmember
Should be good now!
Lots of progress today.
Shackles are now boxed in, hood is finished(underneath)
Found a POR15 rubberized coating!
Cured all my issues with painting upside down.
Gonna paint the entire bottom of the truck with it.
It may be rattle can. But it lays down nice.
Here is some truck **** for YA!

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Tomorrow, I'm gonna clean the hell out of everything and jamb the truck!

 

[homelessduck]

Hey Brian... Got any day cruiser projects for sale ?

 

[F350camper]

Nice work man, you are making serious progress these last few days.

 

[IDIoit]

Nice work man, you are making serious progress these last few days.

not as much as i would like. been working alot, and TWINS!
hoping to get the door jambs painted, so i can do another steam cleaning on the bottom and frame next week.
after that, time to rip the axles out and then its allll down hill

Hey Brian... Got any day cruiser projects for sale ?

theres one online right now on facebook for 300 bucks less engine
needs glass work including stringers.
almost bought it for parts lol

 

[IDIoit]

i need to stop looking for parts!!!
http://www.ebay.com/itm/Superduty-B...ash=item3d1619d310:g:6AkAAOSwEK9W~kzs&vxp=mtr

 

[homelessduck]

theres one online right now on facebook for 300 bucks less engine
needs glass work including stringers.
almost bought it for parts lol

Thanks , but I was hoping for something that just needed an engine and interior type work. I suck at glassing.

 

[sjwelds]

Brian, are you sure your 3" x 4" tube across the front is strong enough for the winch mount? I'd almost be worried that you'd pull it into a curve in a hard pull.... Just my 2c

Looking great tho!!

 

[IDIoit]

Brian, are you sure your 3" x 4" tube across the front is strong enough for the winch mount? I'd almost be worried that you'd pull it into a curve in a hard pull.... Just my 2c

Looking great tho!!

its 2 x 3 x 1/4"
with the gussets, and the 3 9/16" bolts in the front of the bumper, it should be pretty stout!

 

[IDIoit]

But first, it's fkn hot!
So I'm taking the boat out!

You must be registered for see images attach

 

[laserjock]

One problem with a 6 door truck is the number of door jambs...

 

[FORDF250HDXLT]

But first, it's fkn hot!
So I'm taking the boat out!

You must be registered for see images attach

hey! get back to work you bum! what do you think this is,the weekend or something?! have fun! work hard,play harder.

 

[IDIoit]

yea, deciding if i shuold paint slightly inebriated.....
most likely save it for tomorrow.

 

[IDIoit]

really glad i didnt paint this thing lastnight.
spent another hour taping off, and my compressor had massive water in the tank...

heater is on and shell be ready to spray here within the next hour!

 

[IDIoit]

Does this need a description?

You must be registered for see images attach

You must be registered for see images attach

 

[DaveBen]

What will be your final color? Looks very nice!

Dave