WTB:D50 Axle Shaft Passenger side

[Waystro]

Wanted D50 passenger side axle shaft mine is rusted and pitted
Must be in good shape not looking to spend more than $160 I can buy new for that
If ya got one cheap let me know.

 

[leojr]

I'm in Denton...

Isn't the passenger side two pieces? Are you needing the inner or outer?

 

[Waystro]

Both I'll grab a pic of what I need as soon as the rain stops
Your about 4 hours from me(Spurger)

 

[leojr]

Mine came out at about 160k miles about a year ago.

You must be registered for see images attach

You must be registered for see images attach

 

[Waystro]

Pics I workie
use advanced when posting pics

 

[leojr]

You must be registered for see images attach

You must be registered for see images attach

 

[Waystro]

Looks like it how much shipped?

 

[leojr]

Very inside of the three shafts is retained inside the diff? Let me read up how to disconnect it. What is you shipping zip code?

 

[Waystro]

77660

 

[Waystro]

Here's what I need

 

[leojr]

That is the spindle shaft and axle? And to confirm, you do not need either of the pieces in my bottom pic?

What do those two pieces weigh? I'll use that for a shipping price

 

[Waystro]

No pic is last post.
The end I'm pointing to goes into the Hub the other end goes into the pumpkin.
So I need the complete shaft.

 

[leojr]

I meant the bottom of my two pics. In this pic there are two pieces you are not showing...

You must be registered for see images attach

So, the two pieces in my pic and the two pieces in yours? Total of four pieces.

 

[Waystro]

I meant the bottom of my two pics. In this pic there are two pieces you are not showing...

So, the two pieces in my pic and the two pieces in yours? Total of four pieces.

^^^^
i have that piece. Basically in my pic the short shaft goes into the locking hub the other end(longer end) goes into the piece in the pic you just posted.

 

[leojr]

The end I'm pointing to goes into the Hub the other end goes into the pumpkin.
So I need the complete shaft.

No, the long piece you have goes into another piece, then that piece is U-jointed to the piece that goes into the diff.

What you describe is the driver's side...the shaft goes straight into the diff.