Spuddering and spitting

[knightlogger]

My truck has gotten worse. My truck wont even get up to 2000 rpm with out sputtering and spitting. I don't see any signs of my injectors leaking. It ran fine for a week and now it's running poorly. What's the issue

Sent from my XT1585 using Tapatalk

 

[Clb]

Start reading' then Start hunting!
Help yourself.
I bet ya need new....
Timing reset
Ip
Inj
Glows
Wiring somewhere
Filters

Any and all of the above.
Hit the stickies

 

[knightlogger]

I just did a whole reseal and rebuild on my top end. The only thing I've not done is change the fuel filter out

Sent from my XT1585 using Tapatalk

 

[Clb]

Less info' does not help!
What top end?


Also fill in the truck specs into your sig line so we can attempt to help!

 

[Clb]

Less info' does not help!
What top end?


Also fill in the truck specs into your sig line so we can attempt to help id what your asking about!

 

[knightlogger]

Too end of the whole block both heads and everything else is all new. My glow plugs are new and all my injector s have new seals.

Sent from my XT1585 using Tapatalk

 

[Clb]

Timing set by what method????
who set the timing?

Seals as in coppers? Under inj. Body when installed? Not new or reman?
How many lines on ip?
Who did the heads?
Who did the install?
Who paid for it?
What actually does the thing do?
New inj. Last 100k
Coppers dont rebuild an inj.
They are simply a seal for the combustion pressure!

 

[knightlogger]

I did all the work. And I also did it by the book. https://vimeo.com/162466916

Sent from my XT1585 using Tapatalk

 

[knightlogger]

Its acting like it's out of fuel when I get up to 2000 rpm. But the timing is good because I drove it for a week befor it started doing this.

Sent from my XT1585 using Tapatalk

 

[typ4]

Fuel filter.

 

[knightlogger]

I'll try and change it I have one with me brand new but I can get the old one off

Sent from my XT1585 using Tapatalk

 

[knightlogger]

Could it be my lift pump ?

Sent from my XT1585 using Tapatalk