trackspeeder
Stone crusher.
Possibly, but pushing the button does nothing...
Gary
Wire could be broken in the column
Possibly, but pushing the button does nothing...
Gary
Wire could be broken in the column
What kind of speeds were you running?
I'll have to look into that one... How do you get into where the light and button are located... (Hopefully without breaking anything??)
Gary
Then that's what it is.. Bradley Roberts and I adjusted the FIPL, but it didn't do a thing.. I have to pull the shifter down to get first, have no second and then shift it up to third. If I try to take off in drive, it takes off in third.. Oh, and there's no O/D-off light... ever..
Gary
There is an elecrical problem , either a power problem, a unplugged connection on the pass side of the trans, or a bad selenoid pack,
common problem is the seloniod pack,
And you dont think it may be something as simple as the TPS. I've had them do some crazy stuff before. Start out in second and converter kicks in and out
What are the codes for the tranny? Have you disconnected and cleaned all of the connectors to the tranny, FIPL, Tack sensor, Speed sensor, TECA, Barometric Sensor, and don't forget to check the brake system for shorts, grounds, bad connections, and defective swithes.
Jim