Jbone36
Registered User
Removed mechanical , Installed 11 psi s eachoice facet pump. Was running before I replaced mechanical pump but very hard starts and sometimes none without alot of work. Injector rerurn lines and caps are new but now today after installing elec pump if pump is running and i wiggle or press down slightly on the injector lines they bubble..all of them bubble and leak fuel when depressed. Also i have fuel intrusion from tank because i can see it bubble through clear installed line to pump. But that said, it started with the mechanical but wont start with the electric. It fires up and then dies..light spray of ether around opening of air filter and it fires and dies but there is fuel. And it ran with mechanical. Is there a need to adjust injection timing due to more fuel?