clutch
-
T
7.3 IDI ZF5 south bend clutch help!
First thread here so hoping to find some help. Just picked up a 89 IDI, it desperately needs a new flywheel as the stock dual mass is extremely noisy. The truck came with a south bend clutch (pn-1944-5R). However south bend says it’s only compatible with their single mass flywheel. Does anyone...- TristanH89IDI
- Thread
- clutch flywheel idi zf5
- Replies: 4
- Forum: 6.9L IH & 7.3L IDI Diesels
-
S
Slave Cylinder Bleeding Trouble
1993 F250 7.3 idi zf5 4x4 NA Howdy, thank y’all for your help with the ZF5. I installed the 47 on Friday/Saturday and went great. Haven’t shifted it yet but will update other post when I do. While I was dumb***ing about getting it installed I wanted to start pick up to check if my rear main...- screwhead
- Thread
- 7.3 idi bleed clutch master cylinder slave cylinder
- Replies: 18
- Forum: 6.9L IH & 7.3L IDI Diesels
-
K
Clutch pedal stiff & doesn’t engage the clutch when depressed, also pedal gets stuck when coming back out?
Today drove my 1985 6.9 4 speed with OD to the golf course. When I was in the parking lot it felt like it didn’t want to find a gear and thought it was just me, but now I’m certain because the clutch won’t engage for me to put the truck into any gear! Any thoughts on this? The pedal seems like...- Kingralph88
- Thread
- 1985 6.9 idi 4 speed clutch
- Replies: 56
- Forum: 6.9L IH & 7.3L IDI Diesels
-
D
High clutch pedal effort
I know its an old truck but the clutch pedal effort seems unusually high. It takes most of what my leg can do to get it to the floor and holding it down for more than a couple seconds my leg is on fire. I replaced all the pedal bushings did the heim joint mod and replaced the hydraulics and...- Daniel McCurdy
- Thread
- clutch dmf effort gear high pedal sfm
- Replies: 14
- Forum: 6.9L IH & 7.3L IDI Diesels
-
D
Best clutch hydraulics
So my slave cylinder decided to form a pinhole leak and I had no clutch for 20 miles so now I need a new one. I just need the slave but if heard there impossible to bleed so should I get the prebled kit. What brand should I go with are they any that are better than the others.- Daniel McCurdy
- Thread
- clutch hydraulics master cylinder slave cylinder
- Replies: 12
- Forum: 6.9L IH & 7.3L IDI Diesels
-
D
14in sae 2 clutch torque rating
Does weight effect how much torque these clutch can handle. I found one rated at 1400 torque but I imagine that's at 60k lbs. In a 8000 pickup would that clutch be able to handle more torque like between 1800-2000 lbs- Daniel McCurdy
- Thread
- 14in capacity clutch sae torque
- Replies: 4
- Forum: General Discussion
-
Clutch problems?
Hey everybody, I assume it's time to replace my clutch but I thought I'd ask yall if there's any possibility of my issue being related to something else. I'm moving to a new home and I just used the bed of my truck to haul a fairly decent load through the mountains. This was the first time I've...- Ryan Cowper
- Thread
- clutch
- Replies: 10
- Forum: 6.9L IH & 7.3L IDI Diesels
