Search results

  1. S

    International GP's

    they were $21 each here in sacramento when i was looking, ford wanted $19 and that was with a friends discount. i ended up going with the wellmans, much, much nicer than the autocraps that came out.
  2. S

    air ride questions

    somthings wrong if its bouncy as hell, all of the ones that i have done all ride way better than stock. what was it that was bagged and what bags were in it? did it have shocks on it? some of those mini truck dudes dont use shocks so they bounce faster.
  3. S

    4.10 vs 3.55

    turbo is on the list of stuff to do, it will be done before i waist money on gears.
  4. S

    4.10 vs 3.55

    dont do it, i have 4.10 and 38"s and it sucks big time. i just got back from dirtbike riding in the sierra's and i could barely keep it going 55 and that was with only 2 bikes in the back and my truck weighs 7k. i am scared to even think about towing my toyota to the trails as soon as its done...
  5. S

    air ride questions

    are you going to to bag the front too or just the back? why so much lift for 35-37's? i have 38.5's and only lifted about 3" in the front and stock 4wd hieght in the back, but i did move the front axle fw about 2". i would expuct that if you do the front and rear, linked on bags that it will...
  6. S

    Air Compressor

    i dont think so, but there so damn easy to do. now try stuffin one under the hood of a 91 caprice, that on was one of the tuffest ones i have done. i had to move the alternater to the other side and lay the york on its side where the alt used to be. if you have the room and the patients to...
  7. S

    Air Compressor

    what viair pump do you have? i never had good luck with them. they always seemed to loose power after time.
  8. S

    Air Compressor

    what kind of compresser, engine drivin or electric? i think that a elecric whould get to hot under the hood, but caddys and lincolns both have put factory compressers under hoods. now on to the engine driven, i have done a butt load of them and would do them over a electric one any day of the week.
  9. S

    Wheel base??

    heres the new ride, 25" longer at 157" but it makes for a nicer tow rig to get the yota to the trail.
  10. S

    Wheel base??

    cab was a 86 and was bare and the truck was a 89 and didnt want to play guessing games with what fit, and besides theres a lot of crap involved in tearing out all of the dash and stuff on the firewall. with the cut and weld setup the truck was only down for 1 day and was driving it again. i have...
  11. S

    Wheel base??

    that one is the first one i did ,reg cab lonb bed with a 460 c6. so i found a good running 7.3 zf for a grand, but it was only a xcab and 2wd so it got cut and thats why i have a 7' bed, and still no t-case yet.
  12. S

    Wheel base??

    standard cab lb is 133 and a cc lb is about 3' longer, heres a pic of my old truck
  13. S

    how much can you safely haul in the bed of an f250?

    i had 2300lbsof scrap steel (old 460 truck) in the bed of mine and that isnt including all the tools in the tool box. about 20 miles with speeds up to 50mph. it drove fine. my truck weighs 7700 lbs with tools and driver.
  14. S

    rear disc conversion.

    78, but they suck. and you have to hunt down the levers at a jy because the rebuilds don't come with them, and aren't available.
  15. S

    Need a front shock mount for my '91 4WD

    copied from pirate bulletin board toyota faq, Ford Part #E5TZ-18183-A
  16. S

    Need a front shock mount for my '91 4WD

    ford stealership normaly has them, there about 15 bucks each. alot of the yota guys i know use them.
  17. S

    W MO Pump

    i run a carter, and it pumps 75% wmo just fine i was thinking of using a air compressor pressure switch, set it to come on at like 30-40 psi and shut off at 40-50 psi. and put a ball valve or a gas pump nozzle on it. i would just use a steel drum and 40 psi of air because of simplicity...
  18. S

    W MO Pump

    i think they are talking about pumping it through filters into the tank, not a fuel pump. i am getting ready to build a pump and use a electric motor and a power steering pump or a a/c pump. i just need to regulate it down so it dont blow up my filters.
  19. S

    Oil Cooler removal

    mine just started leaking:puke: , and your not making me feel any better about it-cuss
  20. S

    Question for people that done solid axle conversion?

    i went from 2wd to a d60 and have absolutely zero d.w. and i dont run a steering stabilizer. there are a few things you can do but we need to know what exactly has been done to you truck. and you don't need to go to a alignment shop with a straight axle. i do all of mine with a tape and a angle...
  21. S

    Is there anyone near the Placerville CA area who can set IP timing for me?

    hey tony, give ken at imler diesel a call. he's a cool guy and is not out to bend people over. there located in sac, roseville rd and el camino area.
  22. S

    Pyrometer

    what do you guys think about using the alarm output to control some sort of water or meth injection. that way the meth will only be injected at that preset temp and shut of as soon as the temp drops, or am i justcookoo
  23. S

    would an 89 gas sender work on an 89 diesel?

    i have been thinkin the same thing, i have a good sender out off my old 460 truck. i think the plugs are different, but its just wires.
  24. S

    LIft Kits

    my truck is a 89 f250 ( was 2wd f250 x cab, now its a crew with a d60) on 38.5" pro comp xterrains and it rides like a caddy. front= rear spring pack with a extra leaf, zero rate add a leaf ( plus it helps move the axle forward another inch) and a 1.5" forward 1.5" lift shackle reversal...
  25. S

    instrument cluster issue

    thanks guys, that what i was kinda figuring.

Latest posts

Forum statistics

Threads
91,333
Posts
1,130,532
Members
24,136
Latest member
m2rtin
Top