Search results

  1. R

    Charging question

    I would say so yes.. most likely right next to the connection on either side
  2. R

    Go to reman injection pump

    Ended up getting a moose junior pump, thanks everyone for your input!
  3. R

    Go to reman injection pump

    That's what I was thinking..
  4. R

    Go to reman injection pump

    No worries man, idk if I put it in the original post I was lol.. Classic diesel is out of stock, says 8-10 weeks.. I don't know anyone that will let me borrow a truck that far, as my powerstroke is down atm as well I'll see if r&d or moose have any in stock, I won't put a parts store one on it
  5. R

    Go to reman injection pump

    It's below the normal amount of spray I guess you could say when you would crack the lines normally.. I took the line completely off the injector after I got fuel to it, and it would barely dribble out, not a shot so to speak, if that makes any sense.. I know the injectors are probably due as...
  6. R

    Go to reman injection pump

    So I am thinking my injection pump is taking/taken a **** on me.. was running fine, started acting like it was a clogged fuel filter/ my electric pump was no good.. pump was definitely weak.. Got it a couple of hours down the road and replaced the fuel filters and pump, had a hellatious time...
  7. R

    Glow plug amp draw

    Thanks for the input guys! I'll get a 200 amp breaker, seems like that's the consensus on what is adequate
  8. R

    Glow plug amp draw

    Hello all, I have been driving my 93 n/A around, and it is a sweetheart! Starts really well after changing the glow plugs, one was at 400 ohms! Question here, what does the glow plug system roughly draw? The original harness for the power side of it was gone from someone doing midnight...
  9. R

    Rsk lift amount

    I think what effects the need of a track bar more than anything is how the pitman arm geometry is.. on the chevy and dodges, they go front to back, not side to side like fords
  10. R

    Rsk lift amount

    Awesome! Can you share what is involved? For me as well as others who are going to do this?
  11. R

    Rsk lift amount

    For my 93, I have a kingpin 60 I am going to swap up front, and while I'm at it, I will do a rsk with super duty springs, figure I'll put together a truck that's about as good as it gets for idis, turbo, manual with a 60 up front.. Question is, how much lift should I expect with the 2.5 in...
  12. R

    Gear choices

    I have a complete rear, and I have a kingpin 60 I'm gonna swap up front.. gears, it all depends on if you do them yourself or not.. personally I am.. I am also going to swap a factory e locker for a 10.5 into the rear, because they cost about as much as a lunchbox locker from ford.. do I...
  13. R

    Gear choices

    Thank you guys! Idk how much to turn up the fuel, I guess I'll do 1 flat and see what it gets me, I don't want excessive smoke at all.. just more peppy is all... just something reliable and good.. I also plan to swap in a kingpin dana 60 I have to make a great truck
  14. R

    Gear choices

    Awesome guys! Pretty much confirmed what I was thinking... I'll be n/A for a while, probably later on this summer I'll swap it on.. What's everyone turning the ip up from stock and keeping decent milage? Isn't the recommended like one or 2 flats?
  15. R

    Gear choices

    What kind of milage do you get? Normally I cruise 70-80 anymore
  16. R

    Gear choices

    I have a zf5.. being able to cruise without it sounding like it's gonna rattle apart would be nice lol.. which is why I'm heavily considering the 3.55s.. I want decent mileage and be able to cruise at highway speeds
  17. R

    Gear choices

    In my 93, it has 4.10 gears to the best of my knowledge, and it's an n/A right now... plan to turbo it at some point, I have a factory kit Main thing I'm gonna be doing with this truck is driving from north dakota to all over the PNW when I'm on my days off lol.. I might tow a car trailer with...
  18. R

    S362sxe too big?

    I forgot about R&D having a turbo.. the 362 is a tad bit cheaper, but I think I might just use that turbo if I ever decide to turbo.. Thanks for the replies!
  19. R

    S362sxe too big?

    Ok, just something I was kicking around, I'm not sure what size the factory/aftermarket kits are running for turbos.. most I would want is maybe the stage 1 injectors or whatever, don't need or want to get crazy with the idi, just make it more drivable and more fun to drive
  20. R

    Hydroboost Ghost

    Just the line between the hb and the box is warm? Sounds like that is the area of restriction.. I'd pull that line off, start it up and see what comes out.. sounds like something is blocked off.. those pressure lines are small on the inside, and a little dirt or other crap can wreak havoc.. I...
  21. R

    S362sxe too big?

    So I've noticed that I can get a wastegate housing for a s362sxe meant for a cummins.. anyone running a turbo in the 62mm cold side with a 65mm turbine? This would be for a diy turbo kit btw, nothing manufactured
  22. R

    Which clear inline fuel pre-filter?

    I'm going to set mine up much how hacked89 did, but much less clean lol.. I'm going to use a WIX 33972 filter before the first filter, it's a 50 micron rated filter, does a good job of keeping the ball bearings out of your pump, and it's cheap to replace, like $10 IIRC
  23. R

    Inline vs plug block heater

    Bring your batteries inside for a while and charge them.. could be partially frozen
  24. R

    Inline vs plug block heater

    If you were willing to spend the coin, a webasto or something similar is the best thing since sliced bread.. I have one on my 01, and I have one for my 93 that will be going on... I leave it on for about an hour, and it starts like it's summer time out.. no smoke, etc.. if you don't know, it's...
  25. R

    93 n/a alternator and tach sensor wiring

    Thanks for the replies! This will point me in the right direction, as I didn't know which was the alternator wire even.. I didn't buy an alternator, I'm recycling parts off of my 7.3 powerstroke lol.. I put a junkyard engine into my 01 this last year, and it had several parts I didn't use.. I...

Latest posts

Forum statistics

Threads
91,304
Posts
1,129,984
Members
24,111
Latest member
Lance

Members online

Total: 591 (members: 1, guests: 590)

Share this page

Top