Search results

  1. PSDfreak

    Replacing GPs in '91

    Tried search to no avail... Replacing GPs in a 1991 7.3 w/ Turbo.....is there anything special to look out for??? Never done it on this truck before.
  2. PSDfreak

    FS: Dash Pad from '93 F-350

    The pad that goes from the passenger side extending over the top of the radio toward the driver side. In good shape, no rips or tears. Grey in color (not positive but I think its the light grey color...any tips for figuring out EXACTLY which color let me know and I'll try to confirm it for...
  3. PSDfreak

    1991 7.3L Glow Plugs - ZD-9?

    Tried to search to no avail...so sorry to ask as I am sure its been asked a MILLION TIMES. Looking to get a set of Motorcraft glow plugs for a 1991 F-250 7.3L IDI....Is ZD-9 the correct part number? Thanks, Casey
  4. PSDfreak

    '93 Power Window Wiring

    I need to roll down the side window on my '93 F-350. Problem is there is no power to the truck and everything from the windshield forward is gone so I need to figure out another way to roll it down. I figure I can probably take the wires and put power to them one way or another to get it to...
  5. PSDfreak

    '91 7.3 Glow Plug Relay

    On a friends of mines '91 7.3 the glow plug realy clicks on and off, on and off when you start the truck...as opposed to my PSD which when the truck is cold and started the relay closes, leaves the plugs on for approx 90 seconds then open and turns the plugs off.... Should the relay in the...
  6. PSDfreak

    FS - Parting out 1993 F-350 7.3 IDI

    Currently the truck is being taken apart. It was a 1993 F-350 4x4, Reg Cab, Long Box, 138k miles (Dark Green Color) I have everything EXCEPT the front axle and transmission. Please feel free to ask about anything you may need. Everything is located in Chico, CA Thanks, Casey
  7. PSDfreak

    Does anyone make a kit to convert from V-Belts to Serpentine?

    Just as it says...Would think someone would have attempted this? Its on a 91 7.3L Turbo
  8. PSDfreak

    '91 7.3L Belt Tightening (V Belts) - AC Comp - How To?

    Trying to tighten the belt running from the AC compressor down to the fan then the crank...its slack and making a bunch of noise at idle. It looks like I am going to have to move the AC compressor to take the slack out, just not sure which bolts to turn... Thanks, Casey
  9. PSDfreak

    1991 7.3L Turbo - Oil and Filter?

    This is a friend of mine's truck, just got it...Want to head down to wally world and get a filter and oil...Im figuring Rotella 15-40 (4 of the gallon size) and wondering if you guys get motorcraft filters there too? Part number? Thanks, Casey
  10. PSDfreak

    What a '93 7.3L Turbo IDI Worth?

    The motor by itself...its a 1993 7.3L IDI w/ Factory Turbo...has 138k miles on it...last it ran (last year) it smoked a little white, not bad, ran good...turbo all in the game shape, no damage to compressor wheel or shaft play so I dont think it has ever "ingested" anything other than air...
  11. PSDfreak

    Front Gross Axle Wheel Rating?? -- '93 F-350

    Ordering some parts online...The place wants the "Front Gross Axle Wheel Rating" My door sticker is no longer there so I was wondering if anyone could tell me what it is... Truck is a 1993 F-350, Reg Cab, 4x4, 7.3L
  12. PSDfreak

    Front Brake Caliper Removal??

    On a 93 F350 4x4. I have done the brakes on my '97 250 but these calipers attach differently on this '93 D60...looks like there are some long metal pieces that just slide in? Do you just pinch it and slide it out? Thanks
  13. PSDfreak

    Front driveshaft yoke removal from '93 F350 T-case

    First, I want to thank all of you for helping me with all of these little questions...you have all been very helpful!!! Anyhow...I need to get the yoke for the front drive shaft off of the donor t-case (1993 F-350) to use for my T-case when I swap in the D60. It looks to be about a 32mm-34mm...
  14. PSDfreak

    1993 F-350 7.3L IDI -- Which T-Case??

    Is it a BW 1356?
  15. PSDfreak

    1993 7.3L IDI Turbo Removal?

    Its got a factory turbo and I need to remove it to sell...Any one have a write or a quick how to on removal...Im somewhat foreign to the IDI motors... Thanks, Casey
  16. PSDfreak

    HELP, quick question...ZF5 Removal

    1) How many bolts hold the transmission to the motor? 2) Can I take the transfer case and tranny out as 1 piece?? I ask beacuse I can't seem to get the t-case linkage off of the transmission This is for a 1993 F-350 7.3L IDI Turbo Thanks, Casey
  17. PSDfreak

    How to R&R ZF-5 from '93 F-350 7.3L?

    I need to pull the ZF-5 out of a 1993 F-350 Reb Cab, Long Beg, 4x4, 7.3L Turbo IDI this week.... Never pulled one of these before...Figure im gonna need a tranny jack...anyone got a little how to or some tips on how to make it go as smooth as possible?? Thanks
  18. PSDfreak

    Weight of 93 F-350 Reg Cab 4x4

    I tried to search but couldn't find anything...I will need to trailer a truck Im looking to buy...Its a 1993 F-350 Reg Cab, 4x4, 7.3L IDI. Any ideas? I've looked through Google and everything, haven't found anything yet... Thanks, Casey
  19. PSDfreak

    93 F-350 w/ Weird VIN ???

    I ran the VIN on a truck I am looking at (2FTHF36C0PCB39407) And it came up with a 11.1L 6 cylinder diesel...Ran it through https://www.fleet.ford.com/maintenan...ls/default.asp <--- That site. It says the 8th position in the VIN is the engine spec...This one is a "C" Any ideas??
  20. PSDfreak

    '92 7.3 Turbo IDI...Fuel Filter Light

    My neighbor has the above listed truck....Fuel Filter Light came on today...He changed the fuel filter...its still on....I think he said that as he accelerates the light glows brighter... I really know very little aboutthe details of the IDI...Any advice gentlemen??? Thanks, Casey
  21. PSDfreak

    Superdutydiesel.com = Oilburners.net ???

    I typed in Superdutydiesel.com this evening and I was sent to www.oilburners.net/forums Though maybe it was my AOL browser do I opened up IE and tryed it there...same deal...lol Whats goin on boys? -Casey
  22. PSDfreak

    WANTED 94-97 Intercooler Pipes

    I am looking for some plumbing that will fit in my '97 F-250. I have a 7.3L SD Intercooler on its way and a GTS spyder intake...So I am in need of the two between the intercooler and the spyder... Thanks, Casey
  23. PSDfreak

    Fuel Tank Selector Switch

    I got a fuel tank selector switch off of a 95 F-150 Gasser from a pick-n-pull. I was wondering if it will work for my truck. It looks just like the one out of my truck, and the connection on the back "looks" the same. I dont want to pull the dash piece off if it's not going to work because I...
  24. PSDfreak

    Blowing #4 Fuse in Cab

    I was driving along today, in the truck about 5 minutes when all a sudden #4 (15A) fuse in the cab fuse box blew (Tail Lights and All dash lights went dead) I got to my friends house and checked it out finding the bad fuse. I didn't have a spare 15A fuse with me so I put a 30A in to make the 5...
  25. PSDfreak

    Reverse Lamps Fuse Blowing

    Another post reminded me about a problem I am having...I have posted about it in the past without an sucess so I figured I would give it another go round... #5 (15A) Fuse under the hood keeps blowing on me...Seems (not sure though) that it blows whenever I hook up the flat four pin trailer...

Latest posts

Forum statistics

Threads
91,336
Posts
1,130,579
Members
24,140
Latest member
placidoert

Members online

Total: 805 (members: 8, guests: 797)

Share this page

Top