So I went ahead and bought a code reader,
I get a 23 code. Tps out of range,
So I tested my tips and set it to 1.2v at idle and 4.5 at wot, and it made no difference.
So I replaced the tps with a brand new one and adjusted it and still have the same issue.
The voltage is correct...
Its a 1990 f250 ext cab 4x4
Obviously its an automatic,
It could be a fusable link but I would think something else would also go
Under the hood are the 2 relays I tested the one for the tcc and it appears to have power.
My Od light doesn't appear dim and nor is it flashing.
I...
I changed my glowplugs and I think I got a bit of an arc when the air cleaner touched the glow plug relay.
Everything was fine with the tranny until then,
I have tryed to run codes but nothing happens,
I tested the EEC relay and its good on all circuits,
I went through my fuses...
Hello I have been fixing up my truck a bit
1990 f250
Now I changed the glowplugs and it starts and runs great.
I wanted to check the codes on the EEC module and plugged the wire in the correct places.
But I got nothing no reaction at all from the system. I know the engine itself...
Finish it or regret it later...
why should your family pay for it, if it's your truck?
work hard then work harder and make it happen,
if you start the trend of asking people for things and not earning them yourself, you will never have any degree of success in your life.
Sounds good when I figure out what I am going to do I will let you know,
The truck has a few issues that need to be sorted out,
1. is that it over heats the rad cap may be faulty in this case because its leaking from there
or it could be the thermostat that is needing replacement, or...
motor was pulled from a wrecked truck, it had been sitting covered for awhile.
the guy was a honest guy, I pulled the injectors from the motor today they have the factory grey paint on them, none of them are gummed up or heat damaged they look brand new to me.
they are factory standyne...
I acquired the complete turbo engine from a guy in Winlaw,
he said that it had 180k on it I haven't seen it run but I am willing to risk it to see what happens.
its pretty dirty due to leaking valve cover seals but its simple enough to clean it up.
we shall see how this truck goes for...
The truck is a
89 F250 extended cab long box 4x4, Automatic with overdrive.
I am located in maple ridge, bc
I can fabricate the intake hat, but once you start to get into it.
do I want a intercooler?
should I modify the intake it could make fabricating the hat much simpler as the...
Hello There I just joined the forum, I bought a 89 F250 with the N/A 7.3 Mostly because I had a 94 7.3 turbo engine kicking around in good shape, I want a simple reliable truck.
The guy I am buying the truck from just put a new tranny into the truck a couple of months ago, it needs a few...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.