Search results

  1. B

    93 7.3 idi e40d code 99

    cool thanks for the info! I will check it out
  2. B

    93 7.3 idi e40d code 99

    My trans is still acting up a little bit now it quick shifts from first to second with OD light blinking after second light goes out and shifts normal. I can feel TC lockup and drives great until when stopped it quick shifts again and light blinks. I pulled codes and am getting a code 99...
  3. B

    95 1500 6.5 Stalled wont restart please help lol

    Cool thanks again 79jasper!
  4. B

    95 1500 6.5 Stalled wont restart please help lol

    I reset codes and ran the truck around a little bit this morning checked codes again and its continuously flashing code 12 from what I understand that's a good system check am I right?
  5. B

    95 1500 6.5 Stalled wont restart please help lol

    Alright well it seems good to go it fired up I had to bleed the lines a good bit but seems to be running pretty good thanks again guys!
  6. B

    95 1500 6.5 Stalled wont restart please help lol

    So I am pretty sure I have it figured out I found a few bad wires going to the fuel pump. I am off to autozone to pick up a new pump should be good to go. Thanks again your guys assistance and patience I am learning a ton about these 6.5's and their quirks I will let you know for sure if it runs
  7. B

    95 1500 6.5 Stalled wont restart please help lol

    I will dig into it tomorrow and check the pump and let you know. Thank you for your help I don't know a lot about the workings of this truck so I really appreciate your input!
  8. B

    95 1500 6.5 Stalled wont restart please help lol

    I had replaced the pedal position sensor about 2 months ago because there was a time it would idle but had no throttle response that seemed to fix it but I may have gotten a bad one. I just put the old one back in to see if it would at least start and idle with no luck. Do you think it could be...
  9. B

    95 1500 6.5 Stalled wont restart please help lol

    Well I installed a crank position sensor just because it was cheap enough and I have had issues with other trucks and that was the problem but nothing. it does have the pmd relocation under the front bumper and still has the one on the side of the pump I may unhook it and plug the one on the...
  10. B

    95 1500 6.5 Stalled wont restart please help lol

    LOL well since you pointed that out I will start there lol
  11. B

    95 1500 6.5 Stalled wont restart please help lol

    I ran into a store yesterday left the truck running when I came out it had stalled now it just cranks and doesn't even try to fire. I pulled the codes they are 23,29,33,63,73,93. I am thinking crankshaft position sensor but don't think I got a code really mentioning that. It was just weird...
  12. B

    Picked up a 1500 with a 6.5 turbo diesel

    Thanks! I wasn't real sure what it was I don't know much about these motors but its clean and runs well. I actually bought it for my wife but she says she wants a suv so I'm not complaining I am gonna keep it and pull my F350 off the road and build it.Thats pretty cool they put these diesels in...
  13. B

    Picked up a 1500 with a 6.5 turbo diesel

    I am pretty excited I picked up this 1500 with a 6.5. I didn't know they made a half ton with a diesel. It has 194000 and is pretty clean and runs awesome. Do any of you guys know what the gold plate is? Its mounted in the front on the skid plate and has some wires coming out of it. I am pretty...
  14. B

    93 7.3 idi e40d randomly kicks down to passing gear

    The OD light isn't flashing and the convereter has about 10,000 miles on it, I havnt noticed any flicker in the speedo or tach but the truck does rev when it happens. could it be my FIPL? closed throttle its measuring 1.21 and WOT it measure 3.8 I believe its supposed to be 4.5 at WOT
  15. B

    93 7.3 idi e40d randomly kicks down to passing gear

    My 93 idi with e40d randomly kicks in and out of passing gear cruising at 45 to 55 mph any ideas? Thanks in advance for anyone who can give some input!
  16. B

    Best injectors for 1993 7.3 Idi non turbo

    I just did a return line kit over the weekend to fix my starting issues are the caps good for another go around or should I replace them? I would imagine at least new orings
  17. B

    Best injectors for 1993 7.3 Idi non turbo

    awesome thanks guys! I need to replace one or more injectors and figured I should replace them all and spend a little more and get something better than OEM and replace them all. especially since the truck is "sick" I have the wifes blessing at the moment lol
  18. B

    Best injectors for 1993 7.3 Idi non turbo

    I am looking to buy injectors for my 7.3 is there any injectors better than the next?
  19. B

    93 f350 7.3 e40d codes questions

    ok guys well I have an update its been a busy weekend I went ahead and replaced the torque converter and so far so good! I spoke with one of the techs at the local dealership and he said my TOT code could of been just from unplugging the solenoid and cleaning it. I am not sure but drove about...
  20. B

    93 f350 7.3 e40d codes questions

    ok so does this mean the s-pack needs to be replaced or can I pull it out and clean it?
  21. B

    93 f350 7.3 e40d codes questions

    well just got back in and took it for a drive about 8 miles lights still blinking I checked codes again and still getting a 62 and now a 26 also?
  22. B

    93 f350 7.3 e40d codes questions

    mine never did except for the one time I got the neutral safety switch code. once I replaced that it reset it
  23. B

    93 f350 7.3 e40d codes questions

    the other thing is if the issue is resolved will the od light stop blinking or do I need to reset it by disconnecting the battery?
  24. B

    93 f350 7.3 e40d codes questions

    I can cancel the order, I will go check out the plug right now. is there any other electrical connectors to look at?
  25. B

    93 f350 7.3 e40d codes questions

    I replaced the neutral safety switch and am no longer getting that code but just today got a code 62 and thats the only code I got so I ordered a torque converter. I just ordered the oem converter until I get enough cash to build a decent transmission. I hope just replacing the converter will be...

Latest posts

Forum statistics

Threads
91,304
Posts
1,129,960
Members
24,110
Latest member
Lance

Members online

Total: 756 (members: 11, guests: 745)

Share this page

Top