Search results

  1. G

    ???????Brakes?????

    time to do brakes....i'm going to have the rotors resurfaced still thick enough.....but now I need to find pads......i would go oem if i can't find any high performance pads???????no cheap stuff please......does anyone know of any hi po brake pads for my 85...
  2. G

    Dual Pyros

    vargas has some thing like that but they have the one that is precise boost and pyro in one.
  3. G

    Gear rollover much louder than expected...6.9 w/zf5

    i also have a luk fly and clutch with a zf5 behind the 6.9 and i also get a lot of rollover noise
  4. G

    anything i should do before reaplcing my injector pump?

    i've also heard to get the injectors checked at the same time you do your ip......because if the injectors are just slightly worn (say pop pressure 1800psi drops to 1600psi) the timing will be advanced. i also heard that the injectors last longer than the pumps about 100k........so.......some...
  5. G

    anything i should do before reaplcing my injector pump?

    i've also heard to get the injectors checked at the same time you do your ip......because if the injectors are just slightly worn (say pop pressure 1800psi drops to 1600psi) the timing will be advanced. i also heard that the injectors last longer than the pumps about 100k........so.......some...
  6. G

    ZF5 Swap Progress

    the new lever goes through a new hole i cut on the body part of the floorpan....not the screw on insert. i covered the old hole and put a piece of carpet over for the air and noise.
  7. G

    ZF5 Swap Progress

    i changed transfer cases so the slots for the hi lo lever doesn't line up so i had to cut a 2"x4 1/2" slot so it will come through the floor pan.
  8. G

    ZF5 Swap Progress

    and there is an ear you have to cut off the zf5 if you're going turbo.....
  9. G

    ZF5 Swap Progress

    here i go!!!!!! i have my truck up and running now....not perfect yet......but up and running. the bolt you are having problems with (crossmember top bolt)i just slid a wrench in there and held it in place while i was cranking away with my other hand (1/2" breaker bar on a swivel) on the...
  10. G

    oil! oil! oil!

    just needed confirmation on some oil i'm about to use. 80w90 for tranny...for sure and auto tranny fluid for the transfercase?? i want to change oil tomorrow.... thanks guys

Latest posts

Forum statistics

Threads
91,339
Posts
1,130,617
Members
24,140
Latest member
placidoert

Members online

Total: 561 (members: 13, guests: 548)

Share this page

Top