.06 X 4.5 = .27 cents per hour so about 81 cents for 3 hours at that rate. Wind chill really not going to effect it other than getting down to your -5 temperature faster. Just saying
Do the headlight upgrade mod and then replace the switch. These came without headlight relays so the full load is going through the switch, the upgrade mod adds relays to the circuit. If the plug on the pigtail looks over heated now would be the time to replace that also. Some make there own...
Diesel rated motor oils never had the stuff taken out of it ,that STP is going to replace what is gone from gas engine oils. The motorcraft 15w-40 you bought is fine without that additve.
If you have it routed properly it is probably the tensioner. When the belt is off is there play in the tensioner, if so replace it. Do all of the pulleys look to be aligned properly?
Without seeing it I would say helll yeah its the tensioner, but its possibly the wrong belt. I was told to keep...
Heres an example that would do everything your asking it to: the Isuzu 4JB1T
http://www.diesel-engine.cn/ISUZU/4JB1T.htm
Not exactly easy to find in the great old USA.
The 4BT 3.9l is the one that gets used because it is available and has the power to satisfy . Yes suspension upgrades may...
Glad to hear its running like a raped ape. Did you see these videos from johnboggs with his N/A IDI? Man these are impressive IMO.Just used his cell phone to record it going 0-60 in 11-12 seconds and we can see the timer . I'd like you to give us some actual numbers to be impressed with but the...
put it on ebay with no reserve and start the bid at scrap value and probably get half of what this guy is asking. nate
http://cgi.ebay.com/ebaymotors/IH-NAVISTAR-7-3-L-USED-V8-DIESEL-ENGINE-OUT-FORD-/220605721079?cmd=ViewItem&pt=Motors_Car_Truck_Parts_Accessories&hash=item335d2029f7#ht_500wt_975
FRom what I have learned from the fellows over at this mazda diesel site.. here
http://north76.proboards.com/index.cgi
it seems like the bell housing is unique to the perkins diesels and you need a bell housing that came stock with that motor and then you can use rear portion of a first gen...
Yeah its good to know how to change your joints and carrier,sometimes it easy sometimes I struggle, but before you get your hands dirty check this out. Last week I am at the folks house and pops says his CJ6 is making noise and wants me to check his u-joints for him, sure enough one of the rears...
Seems like an over priced filter set-up to me , but its likely complete. I can't imagine spending a grand or more for a filter unit , all the parts I see in the pictures look like readily available stuff -a sprayer tank from harbor freight,couple of whole house water filter and a transfer pump...
19 x .8 = 15.2 . So 80% of your 19 gallon tank is 15.2 gallons.
Your right if your blending into an unheated tank you don't want to heat your oil to filter it , if done right cold filtering will remove the animal fats and Partially hydrogenated oil. If you filter at your lowest average...
Heres a sketch of our prechamber I ran across somewhere, from the drawing it really makes no difference whether we have one or not when it comes to floating valves contacting pistons. Dyoung did you ever get that motor on a dyno? Are you installing the governer spring into the replacement motor...
Does the 94 IDI have a turbo? If so I would lean in that direction out of the two listed, I would think its a better tow rig, that being said I have heard of the chevy's around that era getting better fuel mileage the the fords. Theres a million answers to your questions and most of them are...
First off the lugs in the ebay links are two different styles, look at the pictures at the area where they contact the wheel one is flat or tapered and the other is round style, see how its rounded on the seat, dont use the wrong ones.So if thats truly what you have then that is not what you...
I think if you are going to go about this cheaply then you will need to upgrade the suspension to hold a heavier powerplant. 4jb1t 2.8l direct injection puts out 120 hp weighs 500 pounds but was never imported to the Us and so is expensive to get your hands on $2k+ . It s the power to weight to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.