Search results

  1. Oldiron

    Glow plug resistance

    Just to quickly verify. With Glow plugs installed and harness removed, one test lead to battery neg and the other on glow plug, I am getting 1 ohm on all 4 drivers side and .8- .9 on pass side. If I remeber correctly these would be good? Normaly I would test when they are removed, but I...
  2. Oldiron

    Glow plug questions

    I know I can test glow plugs with a test light. But I cant remember or find what the ohms spec is. When I hook up my meter with plugs installed I get 1ohm on all 4 drivers and .8-.9 ohm on pass.
  3. Oldiron

    Best way to post photos?

    Is photobucket the best site to use for posting photos?
  4. Oldiron

    Towing capacity 94 F350 crewcab dually idit

    We are full time also, but the 5th in my pic is my motherinlaws. Ours is 35 with 2 slides but about 8 9 years older.
  5. Oldiron

    Towing capacity 94 F350 crewcab dually idit

    35ft, 3 slide outs.
  6. Oldiron

    BW 1356 parts or replacement?

    Good to know. Just found a used one im going to look at in the morning.
  7. Oldiron

    Shout out! Very happy!

    Truck has 168k. The pump I pulled had a reman tag, but I have no idea how old it is. I would assume worn out pump and injectors. Probably was out of time from being worn out as well. This pump Deffinetly puts out more fuel. Before when I would really get into it, there wasnt much smoke (and the...
  8. Oldiron

    Shout out! Very happy!

    I just finished installing (with great excitement) a Moose Jr. pump, Moose buddy inj, and return lines from Conestoga. Mel (Agnem) and Suzi were both an amazing help with everything from ordering, to reshipping lost shipment, to returning my phone call and answering questions about timing. I...
  9. Oldiron

    BW 1356 parts or replacement?

    Also, are there differances? Like input shaft size, spline count, that kind of thing.
  10. Oldiron

    BW 1356 parts or replacement?

    I need to repair my transfercase. I can drive the truck, but if I put it in 4low, that's where it stays. (Until I get luck moving the shifter back and forth) And ill tell you what, even with 3.55 and zf5 that's a comfortable 25mph. Lol So, ideally, I would like to find a used one that I can...
  11. Oldiron

    Towing capacity 94 F350 crewcab dually idit

    My pic is my heaviest haul. That day was just short of 20k tcwr.
  12. Oldiron

    Is there a preffered engine oil for a 94 IDIT?

    2nd on the t6 syn 15-40. (I get from Wal-Mart) I live where it is more often cold then hot and figure it helps with cold starts. I also use the powerstroke filter for the extra quart. Been changing at roughly 3k and cant remember how much ive had to add. I'm installing a new intake and banks...
  13. Oldiron

    BAD HOSE CLAMPS

    Ive been switching over to the Napa fuel injection clamps. I got sick of the cheap screw hose clamps stripping out before I felt they were even close to tight enough.
  14. Oldiron

    Filter head parts ?

    I think that's my plan, I'll just remove and plug, and ill cap off the nipple in my return line.
  15. Oldiron

    Filter head parts ?

    When I had the "check valve" removed to reseal it, I noticed it just had a tiny hole (like it had been pilot drilled but not finished), I didnt notice anything else as far as any "valve".
  16. Oldiron

    Filter head parts ?

    Can the check valve go bad?
  17. Oldiron

    Filter head parts ?

    I resealed my filter head, while doing so I removed the heater and plugged the hole. My question is, what is the purpose of the return line check valve #E8TZ9K061A and suction switch #E8TZ9S283A? I am running an electric lift pump.
  18. Oldiron

    Throttle cable part number?

    Well,, I grabed one from O'r it fit and gave me full throttle. Stiff? Yes it is, but the old one was fairly stiff. If I have any issue it'll get OEM next time. Need the truck today, my Dainiff got snipped to day and there is no way I'm loading him into my girlfriends k2500 with 9 inches of lift...
  19. Oldiron

    Throttle cable part number?

    Perfect, thank you. They even have it in stock.
  20. Oldiron

    Throttle cable part number?

    I am having a hell of a time finding a part number for a throttle cable. Ive got an 88 f250 with 7.3 w/cruise control. Does anyone know the correct search words or a part number?
  21. Oldiron

    Towing speed with 5th wheel?

    Sorry it does have an ATS turbo kit on it. I pulled it to get the tires topped off and took it for a drive and it was maxed at about 55, sense then I have removed my muffler and turned my fuel up. I havent had a chance to hook up and see the difference, but empty its not even the same truck. I...
  22. Oldiron

    Towing speed with 5th wheel?

    I know to watch my EGTs, so there is that limit. I guess what I am asking is, how fast can a trailer of that size be hauled. Its a 1993.
  23. Oldiron

    Towing speed with 5th wheel?

    I feel kinda dumb asking this. I have an '88 f250 centurion dually with a 7.3 5speed and gear vendors. It'll be hauling a 35 ft 5th wheel. Dont know the weight of trailer yet. Gvwr on trailer is 13,6xx. I wont run it in double overdrive while towing. What is a typical hauling speed? I was...
  24. Oldiron

    Centurion Axle identification question

    So maybe its a Ford/Sterling 10.25. That thought is based on the cover shape.
  25. Oldiron

    Centurion Axle identification question

    I have a 1988 f250 centurion. Its got a dually rear end and the stock TTB front axle with dually hubs. This is what the rear tag reads. 2 V125C 3.55 1027130 Can any one help me ID this, I would like to do my brakes. I am assuming it is a Dana 80 out of a '88 f350.

Latest posts

Forum statistics

Threads
93,001
Posts
1,155,998
Members
26,589
Latest member
tke395

Members online

Total: 908 (members: 2, guests: 906)

Share this page

Top