Search results

  1. bennersaw

    heater

    cool. i just took it apart and both pieces are melted quite nicely...
  2. bennersaw

    heater

    is the switch a dealer only item?
  3. bennersaw

    heater

    so just wondering if anybody has any thoughts on why my heater fan doesnt work on high? works on all other settings. thanks
  4. bennersaw

    1989 7.3 IDI has me stumped

    mine did some thing like this and it was the tach sensor. my transmission is an e4od and it needs the tach sensor to shift right.
  5. bennersaw

    lift pump?

    thanks everyone, just wanted to let you know i changed the lift pump and it seems to run good again. drove it around for about 20 miles and seems back to normal.
  6. bennersaw

    lift pump?

    So how much pressure is enough? Im not sure how many miles are on it, as i got the truck this spring and it is the one that came on it. I have no problem changing it if there is a possibility thats the problem. Napa has them for 28 bucks. I will change the rubber line too. Would the ip cause...
  7. bennersaw

    lift pump?

    So the other day I drive my truck about 40 miles and as usual it goes perfectly. it sits for about half an hour, and I jump back in to go home. but i step on the peddle and no power. runs good just no power. so I'm going down the road and slowly seems to come back and runs OK all the way home...
  8. bennersaw

    factory turbo from 94 to an 89

    Thanks for all the replies. I bought the truck for 800 bucks and got it home last night. my son and i removed the turbo and were wondering if there are things to look for to make sure its good. the wheel spins smoothly and there didn't seem to be any end play. I think im going to throw it on the...
  9. bennersaw

    factory turbo from 94 to an 89

    Hi, I have an 89 7.3 auto and have an opportunity to pick up a complete 94 f350 with 7.3 turbo standard pretty reasonable. the 94 is rusted bad but only has 96k on it. I want it for the turbo and the push plates (for a plow). My question is how much of a job will it be to remove the turbo from...
  10. bennersaw

    bud wheels

    Ya I dont know why one side had a different wheel, but luckily i had just sold a 92 1 ton that i kept the tires and wheels from. so far so good. i havent had a chance to drive the truck too much yet, just a few miles of test drive the other day. seems like the wobble is gone. i didnt know...
  11. bennersaw

    bud wheels

    Thanks for the quick replies i really appreciate it. the flat faced wheels I have actually fit very tight on the shoulders of the studs. if you dont put the wheel on square it will lock up crooked on the studs if you know what i mean. once they are on the shoulders of the studs, you couldnt...
  12. bennersaw

    bud wheels

    Im not trying to use tapered lug nuts, im just trying to get this setup right. i don't know whether i gotta get new hubs or wheels or whatever. i was just sayin that if the setup was supposed to use tapered lugnuts with tapered wheels, that they would bottom out on the shoulders on the studs...
  13. bennersaw

    bud wheels

    hmmm well any ideas what i have here then? the studs are shouldered so if i used tapered lug nuts they would bottom out before they tightened on the rim. i thought maybe somebody ground off the lip, but it sure doesnt look like it. i think the truck is an old centurion, it doesnt say it but it...
  14. bennersaw

    bud wheels

    I suppose it could be some kind of adapters? you are right there is no lip for centering which is what got me confused. the other side has the flat wheel on it. but the holes fit tight on the studs. i have some regular flat rims and tires that fit on the same way, tight around the studs. i put...
  15. bennersaw

    bud wheels

    well, I am used to hub centered rims, dont know much about other style rims. this rim has tapered holes like it needs tapered lug nuts to be centered. when i took the lug nuts off, there was nothing to hold the rim centered on the hub, and its loose on the studs. I removed the rim on the other...
  16. bennersaw

    bud wheels

    well i hope a do a better job with these pics, but this setup just doesn't seem right to me. Aren't these style rims supposed to have tension rings? The truck is new to me so I really dont know whats going on... Any ideas?
  17. bennersaw

    bud wheels

    I have an 89 f350 4x4 d60 front end. I have another set of rims that are hub piloted, but the ones on the truck don't appear to be hub piloted. is there such a thing as stud piloted? if so will the hub piloted rims work? hope this thread is ok in this forum, it is an idi...

Latest posts

Forum statistics

Threads
93,001
Posts
1,155,994
Members
26,589
Latest member
tke395

Members online

Total: 787 (members: 1, guests: 786)

Share this page

Top