Search results

  1. reklund

    Brown Truck Under the Knife Project - Engine

    All this and no time to stop for photos or video? I say pics or it didn't happen! Glad to hear it's all running like it should Ryan
  2. reklund

    Running light/Tail light problem. HELP with ideas!

    Check the harness on the drivers side. I seem to remember you had a temporary "lift" on the cab to remove/install the engine. Perhaps you pinched something or pulled a little too hard and broke the harness while lifting the cab? If it worked before you messed with things, it's likely related...
  3. reklund

    Importance of thermal re-torque of ARP studs?

    I didn't do it on my ARP Studs in the Supra either. I run almost 30psi through that one without issues... Ryan
  4. reklund

    ZF5 & Limited Slip Diff

    My vote is for conventional Dex III ATF and conventional 80-90 in the diff with the friction modifier. It's what the truck was designed to run on. Ryan
  5. reklund

    Denver CL IDI Find

    Keith- we gotta get that truck down here and start tinkering. Next weekend maybe? Ryan
  6. reklund

    4 in exaust on a idi

    I've got a 4" MBRP exhaust on my truck, that was intended for an early powerstroke. you will have to fabricate the part that connects to the downpipe, but the rest works fine. I did have to relocate the front hanger on the frame, but the holes were pre-drilled from the factory so I just moved...
  7. reklund

    Rotella vs Delo

    I like Delo better myself, but have run both. My truck seems to smoke a little differently when using the Rotella, but it never seems to use much, if any. Ryan
  8. reklund

    ABS Light

    Check rear speed sensor on top of the differential. Make sure it's plugged in and has a good clean connection. Also, pull the diff cover and inspect the tone ring to see if it has any bent or missing teeth. Usually some metal debris from miles of running will accumulate on the end of the...
  9. reklund

    How to set selling price

    Given the local market, I doubt I could really get what I need out of this truck. For now, we're still weighing our options, but having a paid-for truck is sure nice. I'll keep kicking tires, and if the right deal comes along, I'll likely keep the old IDI for a while, rather than sell it in a...
  10. reklund

    Brown Truck Under the Knife Project - Engine

    Well? Does it run yet?
  11. reklund

    How to set selling price

    Justin's right- I'm in Albuquerque, NM. The truck has definitely spent its time in NM. There is a very small rust spot on the bottom rear of the passenger side of the cab, and the clearcoat is peeling on the roof. Both of these blemishes are scheduled to be repaired next week by an excellent...
  12. reklund

    Brown Truck Under the Knife Project - Engine

    Sean- I still lurk around here from time to time...been busy with the new baby in the house and all. You might have noticed my thread on "selling price". The new baby has revealed the main weakness in my truck: The lack of back doors! I may have to sell the old IDI to make room for the...
  13. reklund

    How to set selling price

    Thanks for the suggestions guys! Its not so much that my wife is dictating what I drive as it is me taking advantage of the chance to get a new truck! I was really hoping to get more like 8-9K, but that's not going to happen on a truck this old, regardless of how nice it is. If the market...
  14. reklund

    How to set selling price

    So I'm kicking around the idea of selling my beloved IDI. Now before you all go cussing me, let me explain my reasons: We just had a baby girl, and will eventually have another child. The supercab is nice, but we'd really like a 4Door so we can take my truck sometimes. Right now, we pile...
  15. reklund

    Brown Truck Under the Knife Project - Engine

    Sean- Your radiator hose will work, but you need to be sure it's only temporary. You WILL get a fine coating of engine oil in there, especially if you run a CDR. Radiator hose doesn't like engine oil at all, and will get mushy and leaky from the inside out over time. Ryan
  16. reklund

    Intercoolers for dummys

    I'll chime in with my experiences: I've got the ATS intercooler kit on my truck. I originally had it hooked up to my old non-wastegated 088 kit with some custom ugly piping I made. It worked well, but I couldn't make over 5 psi with that old turbo no matter what I did. It did add a bunch of...
  17. reklund

    DPS stage 1 Inj. ?s

    Thats pretty much why they suck. Mine only ran on 6 at idle, and never really improved off idle. I took that junk out and put new Delphi's in and it runs great. Never did get hold of Ken to get my money back... Ryan
  18. reklund

    Moose on the loose

    You won't be able to use all the fuel the Moose Pump will put out at that altitude. I live at 5200', and am not sure I could use it all. At 9k elevation, you'll roll coal all over your trailer, unless you have a huge turbo cramming air in the engine to match all that fuel. If 90% of your time...
  19. reklund

    92 F250 Tire Size

    Keith- I've got 285's on mine, but I had to add an add-a-leaf to mine to make sure they cleared the bumper. Mine are on factory 16x7 alcoa's Ryan
  20. reklund

    weird "clicking" from rear axle

    running with the windows open, yes. Especially up against a curb or a wall, it can be very noticable. Just suggested it in the hopes it's something simple! Ryan
  21. reklund

    weird "clicking" from rear axle

    Rock in the tire? I've diagnosed more than one customer concern with bearing noise to be a rock stuck in the tire tread... Ryan
  22. reklund

    Brown Truck Under the Knife Project - Engine

    They look great! You gonna mill a few thousandths off to drop the C/R? Ryan
  23. reklund

    Blocking 2WD trans speedo cable hole?

    Get NAPA to match up a freeze plug?? I've never had my eyes on a 2wd to know how the cable hooks up tho... I've used that trick on Toyota trannies that have a gear "holder" that fits into a smooth bore on the trans, and the cable hooks to the gear holder. Ryan
  24. reklund

    Brown Truck Under the Knife Project - Engine

    Is that a cassette player? Time for a single DIN conversion and a nice CD/MP3 player! I'm kidding- it looks great! I wouldn't want to go cutting up a pristine factory dash like that either. If you ever get the bug there are several companies that make shaft-style radios with modern AUX/iPod...
  25. reklund

    Major Oil Consuption

    X2 on replacing the CDR Valve. It's likely stuck open, and your sucking oil vapor right through the turbo and into the intake all the time. 7 quarts seems excessive, but with the turbo "sucking" the vapor, it could happen I guess. Also, not to sight the obvious, but you are checking the oil...

Latest posts

Forum statistics

Threads
93,001
Posts
1,155,994
Members
26,589
Latest member
tke395

Members online

Total: 834 (members: 1, guests: 833)

Share this page

Top