Search results

  1. Spun4Fun

    GP stuck inside the Head

    gentleman i was able to extract the element successfully with the Vise grip /slide hammer idea was mentioned by madpogue . I put my own twist to the tool as i used one of the Lowes threaded rod and one of my bike sockets with stop washer & Nut at the end ,it worked like a dream , I would...
  2. Spun4Fun

    GP stuck inside the Head

    would it be douable to remove the bolt from the V grip and replace it with actual slide hammer or fab one ..!
  3. Spun4Fun

    GP stuck inside the Head

    USNENFTS , this is great idea as well.. looks like yours all mangled up , i went and bought a long nose vise grip and hope i will be able to do the pull and twist . i have 3 more to do pass side. hopefully the pb blaster does it"s trick if not i am going to try kroil before i go with what'S...
  4. Spun4Fun

    Banks power Drain tube leak

    looks familiar Thank you for them Pic's;Sweet. What did you end up using at the flange side
  5. Spun4Fun

    GP stuck inside the Head

    Yah there is plenty element left outside the head, I uploaded couple pictures . One of the pic not so clear but you can see the full element out
  6. Spun4Fun

    GP stuck inside the Head

    OLDBULL8 .. I am not making a head way with this IDI so far , It sat for long time and i wanted to do it right after i bought to make it road worthy for me , family and hauling my race rig but i guess some times things doesn't work out as well . I have the elment soaked with PB blaster for...
  7. Spun4Fun

    GP stuck inside the Head

    I was in the proces of changing my glow plugs all the ones by the driver side went so well , The one under the filter the elment is still inside the head but all the top part and the thread part came out . If i shine light i can seee the needel tip of it .. I really could use some help . I...
  8. Spun4Fun

    Banks power Drain tube leak

    IDIoit .. i came across this after OLDBULL8 mentioned the idea of his return line going to the V cover ...
  9. Spun4Fun

    Fluid chnage in E4OD throws a code!

    Rebuilding your own Tranny is super fun and self satisfactory IMO . If you end up doing it take you time as mentioned above . I found the most difficult part is the orientation of the component it self and having the right tool
  10. Spun4Fun

    Banks power Drain tube leak

    IDIoit that's is a good point but not sure about the heat that these Turbos make . Long ago buddy and I installed an after market turbo in his Honda CRX and the turbo return line was a steel line going back to the oil pan just above where the oil line .. I guess w a turbo that old the exit...
  11. Spun4Fun

    Banks power Drain tube leak

    G.Mann the new gasket matches 100% the exit drain shape of the tubo not the the flange ...
  12. Spun4Fun

    Banks power Drain tube leak

    G.Mann The gasket shape/style is the problem ... Which one is the correct one ?
  13. Spun4Fun

    Banks power Drain tube leak

    oldbull8 .. i was always wondering why they never came up with a better design like the one you described but rather they choose that stupid VP drain , I was thinking of a new way to re-route the drain. If you could dig that pic .man that would be the ticket Do you recall which gasket was...
  14. Spun4Fun

    Banks power Drain tube leak

    icanfixall .. I am not sure what dented the drain line as i am not the original owner and was asking that myself , Bought it like that . The new gasket floats on top of the circular tube entrance leaving no possibility of oil to leak, However the oval one could allow oil to leak which it did if...
  15. Spun4Fun

    Banks power Drain tube leak

    All help is greatly appreciated , I am just not picturing what you mean , I am more visual , if you have a pic w detail description am open to all mod to get it done once and be done with it
  16. Spun4Fun

    Banks power Drain tube leak

    Well that's how Banks turbo drain/ return the oil back , They use this flex tube to enter the valley pan allowing oil to return back into crank case gehtto way for sure , Every thing is working corretly with exception to the leak by the gasket so no need to re-engnieer what they did .
  17. Spun4Fun

    Banks power Drain tube leak

    bump ..Any advise
  18. Spun4Fun

    Banks power Drain tube leak

    Banks power sidewinder 2nd gen installed on 93 F350 7.3 , I been seeing oil leak beside the starter so i isolate it to the Oil drain return tube coming from the turbo , Banks sent me twice a gasket that non of them looking like the one installed . However the platform of the turbo body look...
  19. Spun4Fun

    Fluid chnage in E4OD throws a code!

    Can you get them to droop the transmission so they can hand it to you ,You take it somewhere else of your choice to get the work done / evaluated then hand it back to them to bolt it on the Truck . If it was me i will fight for it and wont's drive my truck with tranny not functioning 100%...
  20. Spun4Fun

    Leer Cap / camper shell With Tool Box's

  21. Spun4Fun

    Leer Cap / camper shell With Tool Box's

    Hi , I have a Leer cap DCC cap / camper shell for full bed truck which comes with full back doors that requires tail gate removal , It's commercial cap with roof rack for construction material and ladder's , tool box's on both sides and built in shelfs . It measure 8ft long X 5'11 towards the...
  22. Spun4Fun

    7.3 IDi Injection Pump

    i cleaned the VP as much as i can under the IP and slipped a clean paper towel to catch any sign of moist. I dont see any wet spots on the pump body or by going over it with my finger . The only thing i was able to spot is one of the 5/16 connector threads coming out of the pump was somewhat...
  23. Spun4Fun

    7.3 IDi Injection Pump

    IDiot .That is great thread thank you
  24. Spun4Fun

    7.3 IDi Injection Pump

    I know that was coming ..!.;Sweet
  25. Spun4Fun

    7.3 IDi Injection Pump

    I am trying to understand how these pumps work to find out how far they go before they quit working . Along with what is the early symptoms of possible failing pump .When the Eng is running Does the pressure increase as you drive and if they develop small drip drip of diesel in the Vp can you...

Latest posts

Forum statistics

Threads
93,001
Posts
1,155,992
Members
26,589
Latest member
tke395

Members online

Total: 819 (members: 1, guests: 818)

Share this page

Top