Search results

  1. Spun4Fun

    AC service possibile conversion

    I have access to all the tools and My friend have the gauges so no garage for this guy ..Money is tight . I am trying to prioritizes : Should i pull vacume 1st to check for leaks , Pull the Orfus Tube for inspection , or just open the system and replace all O rings, flush , etc What will...
  2. Spun4Fun

    AC service possibile conversion

    Icanfixall..thanks for the count , I will pro look for O ring AC kit
  3. Spun4Fun

    AC service possibile conversion

    Where is these O RINGS :D
  4. Spun4Fun

    AC service possibile conversion

    can some one post a pic of all the AC component lay out Please
  5. Spun4Fun

    Blower Motor and AC box Removal

    BrandonMag In our mind's we are looking at our Eng bay's
  6. Spun4Fun

    AC service possibile conversion

    How many O ring we talking about and where are they ... I agree 100% on loosing the charge due to a LEAK , Truck sat for 8 years. How to find out if the comoressor seal is the problem before dumping money on charging it. If i would convert it to R134 what all i need beside the High and Low...
  7. Spun4Fun

    AC service possibile conversion

    My Green machine needs an the AC serviced as i have no AC , Compressor clutch engage and tested fine , It's currently running the old System R12 . I am going to Pull Vacuum this weekend and service it to make sure no leaks . I have access to R12 my questions are : 1- Should i convert the...
  8. Spun4Fun

    Leer Cap / camper shell With Tool Box's

    I am having a hard time finding some one for some reason ... Every one have the small bed , These OBS fords have big bed Plus no one wants to remove the tail gate i guess
  9. Spun4Fun

    Leer Cap / camper shell With Tool Box's

    Tuesday bump .. No One.
  10. Spun4Fun

    What SCA for what coolant

    When i bought my truck ,It had the green stuff , I flushed it with distilled water multiple time and added Fleet Charge SCA Antifreeze (Pink) which comes already charged with SCA http://www.peakhd.com/product-lines/fleet-charge/sca-precharged-coolant-antifreeze/
  11. Spun4Fun

    So what did you do with your truck today?

    Mine Sat for 8 years and it started right up after we charged the Battery, ..:sly :D
  12. Spun4Fun

    So what did you do with your truck today?

    OOh .. I fixed my driver side mirror as well and mounted my flex plate inspection cover . Mirror bolt was stripped and every time i close the door the mirror swings with it . It was annoying the shitz outa of me . i had to re tap the threads . Now the mirror solid . It was pretty productive...
  13. Spun4Fun

    So what did you do with your truck today?

    3KP .. Yes you need to drill the frame with 17/32 drill bit , Start with small Bit , Make sure you align it right and double check the alignment. It's a process but not bad though . i was going with class 5 but for what i will tow and my budget was no need for it
  14. Spun4Fun

    So what did you do with your truck today?

    Added Curt hitch to pull the race trailer and the boat , The Heavy duty steel 10" is great but the tri ball receiver always better. It was not 45 minute job either like the instruction sheet say.
  15. Spun4Fun

    Front Wheel bearing

    As frfranklin2 mentioned it was related to the breaks . I took the tire off and spun the hub . i could hear the clicking coming from the back of the pads , It's the big clip that goes across top to bottom , It was slightly moved towards the center causing the edge to rub or it's trying to knock...
  16. Spun4Fun

    REPLACEMENT EGT PROBE

    ;Sweet Few test drives under the belt . knock on the woods the EGT regestring the Temp .
  17. Spun4Fun

    REPLACEMENT EGT PROBE

    ran the truck to Lowe's for some lumber and the EGT worked well with no problem's but not telling if it will stay that way , All i had to do is clean the contact by the probe real good with wire brush and connected them snug again . Will see how long it will stay that way
  18. Spun4Fun

    REPLACEMENT EGT PROBE

    laser jack that is pretty nice web site
  19. Spun4Fun

    REPLACEMENT EGT PROBE

    The only spot i could see bare on the wires tip ( Yellow & red ) where it was crimped to the connector unless the black cable going to the cabin is shaved some where up stream
  20. Spun4Fun

    REPLACEMENT EGT PROBE

    Done another ohm test on the probe it self .8 ohm , Connected the meter to the back of the gauge and i have full needle sweep . Cleaned all the connection with wire brush and put it all back together but ran out of time to test drive it . My understanding if you have a bad probe you will get...
  21. Spun4Fun

    REPLACEMENT EGT PROBE

    actually about a month ago i done few tests after talking to Banks tech support and provided them with the result which all passed with flying colors . I done OHM test to the gauge and it passed as the needle swept full scale end -end I have full continuity on the cable it self tip to...
  22. Spun4Fun

    REPLACEMENT EGT PROBE

    My EGT Probe likes to work when it feels like it cookoo . So i thought of replacement , I have BANKS EGT probe do i have to stick with that choice or can i switch to something else ..I came across this product http://www.auberins.com/index.php?main_page=product_info&cPath=5_22&products_id=69...
  23. Spun4Fun

    Power Window Question

    ;Sweet ..Make 100% sense .Thanks for info Cheer
  24. Spun4Fun

    Oil Leak Help

    ^^ High Pressure Oil Pump
  25. Spun4Fun

    Fluid chnage in E4OD throws a code!

    uhh tbrumm .. These Disel lines, caps , O rings and the hole set up ..I been down that road ask me how i know Mate . after you install them you better don't even think to touch them, get near them or even look at them suckers LOL Or they will leak because they can , Because they are bitches...

Latest posts

Forum statistics

Threads
93,001
Posts
1,155,994
Members
26,589
Latest member
tke395

Members online

Total: 828 (members: 3, guests: 825)

Share this page

Top