Search results

  1. SirRea63l

    North Texas labor "co-op"?

    Get the tractor and FEL, this is me 10 days after I died in the ER building a pad for my A/C. Yes, I was a little behind in grass cutting. :D
  2. SirRea63l

    North Texas labor "co-op"?

    I use my tractors front end loader as my muscle. Removing and installing the bed by myself would have been impossible without it. At my advanced age and debilitated body it is the perfect extension of my arms. It is incredibly useful around the property as well.
  3. SirRea63l

    The Texas Fall IDI Meet

    I wish I could confirm my availability, but with the house build, cardio rehab (yes, I am still alive) and the uncertainty of the truck being up for the drive, I have to say it is a maybe, depending on the time.
  4. SirRea63l

    Thoughts on this ad?

    The miles don't scare me, the condition does. A truck with 100k hard miles can be in worse condition than one with 400k miles of all smooth highway.
  5. SirRea63l

    ats 093 install help needed.

    That is an incredibly helpful and useful set of pics! Seeing how the stock setup is done and where things are located will help me as well. Thank You Sir,
  6. SirRea63l

    TRAGEDY STRIKES. = NEED ANOTHER ANTIQUE F250 SUPER-CAB TRUCK

    In the interim there are plenty of trucks to look at.
  7. SirRea63l

    TRAGEDY STRIKES. = NEED ANOTHER ANTIQUE F250 SUPER-CAB TRUCK

    One more, high miles but that wouldn't scare me. https://austin.craigslist.org/cto/5755409663.html
  8. SirRea63l

    TRAGEDY STRIKES. = NEED ANOTHER ANTIQUE F250 SUPER-CAB TRUCK

    Here are a few candidates just North of you. https://austin.craigslist.org/cto/5739715914.html https://austin.craigslist.org/cto/5736362253.html https://austin.craigslist.org/cto/5725369897.html https://austin.craigslist.org/cto/5709057711.html...
  9. SirRea63l

    Steering ISSUE fix - Drag link roll causing dead spot

    Mine is all MOOG as well and I figured I may have to do a little hand fitting, which is ok with me.
  10. SirRea63l

    Steering ISSUE fix - Drag link roll causing dead spot

    I haven't picked mine up yet, not even sure it has been delivered. I only leave the farm once a week or so to go get the mail and any delivered packages.
  11. SirRea63l

    Steering ISSUE fix - Drag link roll causing dead spot

    I would like to be.
  12. SirRea63l

    Radiator Flush

    Our bodies are amazing things. I don't drink, I get plenty of exercise and live a pretty much stress free life but I do smoke. Heart attack came out of no where, I had the arterial scope back in 2012 for my dizzy issues and my cardiologist was very pleased with my circulatory system. I have...
  13. SirRea63l

    Radiator Flush

    Thanks Al, it does get warm but I have kept it from overheating by going slower. I can see the closed off tubes so even if it leaks this radiator is in need of help. If it is too far gone then a replacement will happen, if not then a bullet was dodged. I may get lucky, I got lucky last night...
  14. SirRea63l

    Radiator Flush

    Thanks Gentleman, the truck and house build just got put on hold, I had a heart attach last night and things will need to sit for a while. If I cannot get this one clean without making it leak I will order another one.
  15. SirRea63l

    Radiator Flush

    On the 94 IDIT the radiator has obviously had tap water in it, I noticed some of the fins are a little caked up with calcium. What does everyone recommend for cleaning this out? It looks like the original brass unit so I am unsure about using vinegar as vinegar corrodes brass. I am not sure...
  16. SirRea63l

    Help please!!

    This is the one I used, direct bolt in, no wiring or port issues, it was worth it to me to not hack into the wiring harness. https://www.amazon.com/gp/product/B000NTX2TO/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 I also added inline fuel filters between the tanks and the selector valve to...
  17. SirRea63l

    Gauge install advice needed.

    Found the bulb, it is burned out but at least I can tap of off it now and add the bulb to my shopping list.
  18. SirRea63l

    Gauge install advice needed.

    Thanks to everyone for the guidance. I have the pyro probe, boost and all wires run to cab. I have not put in the water temp probe because I have not had a chance to get more coolant, does anyone have a guess on how much I need to drain out of the radiator? I may wait and do the temp probe...
  19. SirRea63l

    1991 E350 towing capacity

    Have you planned out your route? There are no massive hills but some that will tax the van significantly. I would probably take I-10 to 290 to 183 and plan for a long trip but I would probably not use the van to haul that much, that is asking a lot from it. I would also be wary of the DPS and...
  20. SirRea63l

    Steering ISSUE fix - Drag link roll causing dead spot

    Will these fit the MOOG parts? If so I am in for one if we can get them across the border.
  21. SirRea63l

    Gauge install advice needed.

    It is the 94 turbo, vacuum will be used with the magnet. I resisted buying the angle drill, I have too many drills already and sheetrock has been started on the house so I doubt I will need it but I do have a barn to build and a couple of other buildings. I can already tell getting the...
  22. SirRea63l

    Gauge install advice needed.

    I have been tempted to get a right angle drill, I have needed one way too many times with the house build. I may go ahead and pick one up. I did get the tap when I got the gauges so I wouldn't have an issue. I have the magnet and vac ready. My cordless is too big, or I need to find a...
  23. SirRea63l

    Gauge install advice needed.

    I have always hated not doing things the best they can be done. I have a new OEM thermostat to put in as well as new idler pulley and belt tensioner, I may as well do it right and do all of them at the same time. That takes care of two of the questions, now to figure out the pyro install...
  24. SirRea63l

    Gauge install advice needed.

    The one by the gear tower is not easy to get to, I have the A/C compressor in the way as well and it looks like the vacuum pump too. The port at the front of the drivers side exhaust manifold is really easy to get to, is it a bad idea to use it? The sensor in that spot is the over temp warning...
  25. SirRea63l

    Gauge install advice needed.

    Thanks, would it make a difference if the pyro is installed more to the front? Where you have it is great because it gets 4 cylinders of heat and if I put it farther to the front I won't be getting 4 cylinders of heat.

Latest posts

Forum statistics

Threads
93,001
Posts
1,155,992
Members
26,589
Latest member
tke395

Members online

No members online now.
Total: 836 (members: 0, guests: 836)

Share this page

Top