Search results

  1. ADV

    hydroboost fluid

    My brake booster is leaking fluid so I am going to swap it with my spair. What is the proper fluid to use? I have just been running power steering fluid is that right?
  2. ADV

    Clutch Alignment Tool

    I have stacked different size sockets into each other to make a make shift line up tool. Or sockets wrapped in electrical tape. Its kinda crude but when its all you have around work with what you have.
  3. ADV

    Where to get the fuel line olives?

    I believe you need 2 of the 5/16 and 1 of the 3/8. Sorry for multiple responses doing this with my phone.
  4. ADV

    Where to get the fuel line olives?

    5/16" Vibra-Loc - McMaster-Carr Item 50385K83 on the hardline from Filter head to IP. There is also a 3/8" Vibra-Loc - McMaster-Carr Item 50385K84 on the hardline from Lift pump to Filter head.
  5. ADV

    Where to get the fuel line olives?

    McMaster-carr McMaster Carr Viton products Part No. 9464K24 - Viton O-rings for 6.9/7.3 IDI Injectors Part No. 5119K13 FIRM Black Viton Hose for the hoses between injectors Part No. 5119K861 FIRM Green Viton Hose for the hoses between injectors Part No. 5119K864 FIRM Brown Viton Hose...
  6. ADV

    Push button glow plug warning light

    I have it hooked up to the same place on the z strip that the glow plug wire harnes is
  7. ADV

    Push button glow plug warning light

    The wts light runs off of a ground. My light is on when there is power.
  8. ADV

    Push button glow plug warning light

    I have my glow plugs on push button and I like it that way instead of with the key. But there was one time I lost all of my glow plugs they all burnt out. Stuck on solenoid?? don't know. But after I replaced all my glow plugs I added a little LED light in the dash board right above the WTS...
  9. ADV

    Starters???

    Thats a great srarter. I was having about the same issue but not anymore. But I put the other starter listed for the 6.9 7.3 on. Whats the difference? I cant get link to work.
  10. ADV

    Aluminum injector caps

    All I can say is slow and steady. I make these as a side job at work and this is not the only project I am working on.
  11. ADV

    posted in marketplace but hope i get better answer here

    The parts truck on craigslist is no longer on there as of today.
  12. ADV

    posted in marketplace but hope i get better answer here

    I seen a parts truck on craigslist that would have what you need. Its in WI not to far north of me. He was asking 500 for trans and transfer case.
  13. ADV

    manual tank selector valve

    Thanks for the picture and the information on this. The front tank is the tank I use for my wmo fuel. I was rebuilding my filtering setup this summer and have not made any for a while so I was not using that tank. Well I got a batch of fuel made so I wanted to make sure front tank still worked...
  14. ADV

    manual tank selector valve

    Having problems when I switch to my front tank truck seems to be starving for fuel. I am going to drop front tank and clean it out and check the pickup to see if its clear before I do anything else. But I am thinking about going to manual valves. I picked up a 3 way ball valve from ACE...
  15. ADV

    Aluminum injector caps

    There really should be no reason to put something on top of the cap to hold it down with the injector line. There is enough material in the cap that the o ring will or should seal even if you are moving it around. I put the aluminum caps on my dads truck and while i had it running I was moving...
  16. ADV

    Aluminum injector caps

    I would have been 2
  17. ADV

    Running with no fan?

    I just change my thermostat and water pump, in the process of that i put my clutch fan on the work bench nut side down and it leaked the fluid out of it. Well fan junk so I never put it back on. My truck warms up a bit faster but I still have no problem letting it sit and warm up for 10 min...
  18. ADV

    Aluminum Radiator for sale on CL

    Looks nice. Would look nicer under the hood of my truck! But its so far away from me.
  19. ADV

    craigslist idi class c camper

    http://up.craigslist.org/rvs/4225095269.html Just incase some one was looking I ran across this tonight.
  20. ADV

    Aluminum return caps second truck

    Put them on and see how they do. I will have more for you soon.
  21. ADV

    Aluminum return caps second truck

    Its one solid part. Started out as a 2 1/2 dia. Round stock
  22. ADV

    Trans swap help?

    http://dubuque.craigslist.org/pts/4207794387.html Seen this parts truck on craigslist
  23. ADV

    Billet return caps

    ran truck this morning for 20 min no leaks. While it was running I was moving the caps around, there is some play less that 1/8 that I can pick them up and push them down. That should not effect them if they are up against the line or down against the injector. So far so good on these. I...
  24. ADV

    Billet return caps

    I could probably do brass depending on what we have for stock at work. What would the advantage of brass be?
  25. ADV

    Aluminum return caps second truck

    I did not meen to post this twice i did not think the first post went through, I do not know how to delete this one sorry.

Latest posts

Forum statistics

Threads
93,001
Posts
1,155,992
Members
26,589
Latest member
tke395

Members online

Total: 632 (members: 4, guests: 628)

Share this page

Top