Search results

  1. Ole BlackBetty

    New TPS

    What is the factory spec, in voltage?
  2. Ole BlackBetty

    New TPS

    Thank you all for your comments. Is there a way to connect a tach meter to these trucks, other than trusting the dash gauge, or does it take special equipment? I have a tach / dwell meter I use on my gasser, but it connects to the coil wire, which we dont have.
  3. Ole BlackBetty

    New TPS

    Is there a way to adjust the spread of the idle and wOT settings? If I bring the idle setting closer to 1.2 volts, that is going to lower the WOT setting to about 3.98 volts.
  4. Ole BlackBetty

    New TPS

    Today I installed a new TPS in my truck, set the idle by tach at about 650-700 rpm ( less than half way between 500 and 1000, on truck tach gauge). settings are 1.25 volts at idle and 4.03 volts at WOT. Driving to work tonight I noticed truck seems to shift late, but solid. 1st to 2nd shifts at...
  5. Ole BlackBetty

    E4OD Dipstick

    how do you guys with an E4OD read the dip sick accurately? I can't seem to tell where the level of trans fluid is on that yellowish white plastic thing on end of dip stick. Are there any mods that can be done to make it easier to read, like painting or something?
  6. Ole BlackBetty

    price check?

    And i am thinking of buying one for $800.00, wouldn't have to ask me twice, if it was closer!
  7. Ole BlackBetty

    Broken into while at work

    As a former Law enforcement Officer, we were taught to never state in court or to the responding investigators that you were "shooting to kill". Always state you were "shooting to stop the action". If they die during the act, that is a bonus for you and the taxpayers.
  8. Ole BlackBetty

    Wanted: 1994 F350 E-brake equalizer assembly

    I am in need of the equalizer assembly that connects the 3 emergency cables together, or at least a picture of what it looks like. I have checked the salvage yards in my area and they dont keep anything over 10 years old. Please let me know if you have one you would like to get rid of, thank you.
  9. Ole BlackBetty

    Trans code Help

    Thanks for your reply Ford F250. Lots of good information you provided. Many Thanks, Phil
  10. Ole BlackBetty

    Trans code Help

    Got my new code reader in the mail today. Hooked it up like instructions said to test for OD flashing. Got code 67 with KOEO and 62 in continuous memory. Does anyone have have an idea what these codes are? I have looked at codes in manual, that came with reader, It gives three entries for code...
  11. Ole BlackBetty

    Headlight going dim

    I will admit that, once the WTS light goes out , I start the truck and get moving on down the road, but the lights don't brighten, they they just go dim for a split second and then come back to normal.
  12. Ole BlackBetty

    Headlight going dim

    Ok, if this is the case, then why does it only do it one time from a cold engine? If I stop at a store on the way to where I am driving and kill the engine , turn off lights, when I come back to truck a few minutes later and start up and head on down the road, it does not do it again. it only...
  13. Ole BlackBetty

    Headlight going dim

    I drive my truck mostly at night and have noticed when I first take off in it to drive, when it hits about 30 - 35 mph, just as it is shifting into third gear, auto trans, the head lights and marker light dim for just a second. It only does this once, from a just started engine. It does not do...
  14. Ole BlackBetty

    New water temp gauge

    Today I installed a new water temp gauge, i wanted to put the sensor in the hole located toward the back of the head on drivers side so my stock gauge would continue to work, but could not get the square bolt to break loose at this time. So i put it in the forward sensor hole on drivers side...
  15. Ole BlackBetty

    Power steering pump seal blew!

    Thanks Icanfixall, I usually don't try very hard to get a deer, I enjoy the camping. I learned a long time ago, that once you shoot your gun , the fun is done and works begun! Made my hunting partner mad at me last year, because nine deer walked within 20 yards of me and I never picked up my...
  16. Ole BlackBetty

    Power steering pump seal blew!

    I guess I should list more stuff in my signature, I am not sure how much lift I have, since I don't know the stock height of an F350, but I am guessing it has about 4 inches of lift, which makes my drag link run uphill.
  17. Ole BlackBetty

    Power steering pump seal blew!

    thanks, it looks like a christmas tree at night, lol
  18. Ole BlackBetty

    Power steering pump seal blew!

    thanks for all the responses. I bought a new gear box from Orielly's, $ 145.00, with lifetime warranty got it put in this morning, easy as cake to do. Now I am in the market for a drop pittman arm, if anyone has one at a brother in law price, lol. Heading out next wednesday, for 5 days of deer...
  19. Ole BlackBetty

    Power steering pump seal blew!

    I may be mistaken on the pump part. It is running fluid from the seal at the pittman arm, was I mistaken and is this seal changable?
  20. Ole BlackBetty

    Power steering pump seal blew!

    Driving home today , I stopped at the grocery store and on the way out I noticed a stream of fluid on the parking lot, which stopped right under my truck! The fluid is coming from around the lower power steering shaft seal. I need some info please. What does it take to change the seal, and do...
  21. Ole BlackBetty

    Moose Product news

    Congrats, on a huge step forward in these hard times, I wish you well and would like to have your products in my truck someday!
  22. Ole BlackBetty

    EBAY injectors!!!!!!!!

    Stumbled across these on Ebay............................. how many would you like, lol??? http://www.ebay.com/itm/93-94-FORD-SUPERDUTY-F250-F350-F59-Diesel-Fuel-Injector-OEM-Original-7-3-7-3L-/230852938414?pt=Motors_Car_Truck_Parts_Accessories&hash=item35bfe84aae&vxp=mtr
  23. Ole BlackBetty

    This definately is cool!

    X2, I have first hand knowledge of where the original truck from the movie is, unless they had more than one built for it.
  24. Ole BlackBetty

    fuel filter heater oring

    Just replaced the o ring on my filter heater today. bought the new viton orings from harbor frieght. I was wondering though, which is better, the Viton or the HNMB, green ones. Hey say they are for fuel systems, any thoughts?
  25. Ole BlackBetty

    Sick 7.3 IDI please help!!

    So I guess the BB code injectors won't work in my truck, because that is what I have a factory turbo. But Icanfixall, I thought implied that the BB codes will work, what is the difference between the BB versus G code injectors?

Latest posts

Forum statistics

Threads
92,996
Posts
1,155,953
Members
26,579
Latest member
truckonfire

Members online

Total: 1,466 (members: 2, guests: 1,464)

Share this page

Top