Search results

  1. pelky350

    Turbo talk

    Why won't mine do 3rd gear burnouts?? I've got a 90cc, stage 1's timing at 7, intercooler, and factory turbo with banks housing and 60-1 wheel with banks downpipe and 4 inch exhaust and larger intake/filter?? Axle wrap is a factor on why I don't try burnouts often, probably won't try to do that...
  2. pelky350

    Turbo talk

    Your 093 will spin tires in 3rd?? I need to re gear or something lol @Thewespaul whats done to the truck otherwise?
  3. pelky350

    Turbo talk

    Find a used kit, have @typ4 do the rebuild on it or just purchase a kit from typ4, conestoga, or r and d and call it a day lol unless you do want to build your own kit but in the end it's probably going to cost you about the same unless your really resourceful but I understand the desire to make...
  4. pelky350

    Fuel gauge pegged

    My guage stays pegged until about 1/8th tank on my truck. Oddly at first it would only peg after 3/4 tank but now it pegs after 1/8 and basically does the same thing on both tanks similar to yours. Let me know what you find wrong!
  5. pelky350

    6.9 Exhaust System

    i run 4 inch side dump on my truck and most say it's like a log truck to them just normal sounds around my town lol when cruising it's more like a 6.0 just whistles
  6. pelky350

    $350 IDIT complete - It's a runner!

    Unfortunately for me yards her say well it's a diesel so 1500-2000$ no matter what it is because the work diesel comes to play they double prices of anything lol
  7. pelky350

    Atf in oil flush

    Well I put 1 qt atf in earlier would it hurt dumping a quart more Marvel? I was at the add line earlier just about and added 1 qt atf so technically I have room for one more qt of something in there lol
  8. pelky350

    Atf in oil flush

    So a weeks probably not going to hurt anything? Maybe 100 miles or so but I figure just having it sit around throughout the system should eat away some of the crud if there is any valve covers looked no so bad under but who knows about inside the valley area where lifters live and bottom of oil...
  9. pelky350

    Re treaded tires?

    I'm just hoping to make it till summertime, my old tires were gonna blow anytime with 0 per event tread left lol rolls a lot nicer with no broken belts. Next on to do list is changing all my fluids out but ran out of daylight today
  10. pelky350

    Atf in oil flush

    how long and how much should I run in my oil before my oil change? I'm due soon and want to do a flush of the system. Have had a tick for a long time I think maybe a sticky lifter possibly and if it can't hurt my motor to do this I don't see why not?
  11. pelky350

    Re treaded tires?

    Runnin smooth and quite no more broken belted tires and switching from m/t to a/t is a nice change less road noise. I know the risks and what to watch and feel for I stay in town mostly so we will see. Bfg makes a decent tire and Michelin is known for quality so hopefully these will go a while.
  12. pelky350

    Re treaded tires?

    One tire took almost 16 ounces to balance it LOL
  13. pelky350

    Re treaded tires?

    They are Michelin brand re caps If that's any help, they are being installed now. Hopefully just till summertime
  14. pelky350

    Fuel leak at fuel filter

    I plugged mine the same way also, liberal amounts of sealer were needed to get it to seal it does not seat on many threads and won't seal easily. I wouldn't add the sealer with the head attached still. Take it off take apart and re seal the plug in there with j b weld and be carful not to leave...
  15. pelky350

    15 years sitting

    Sat for 15 years? Time for another "old start cold start" video on YouTube!! Lol
  16. pelky350

    Re treaded tires?

    100$ for a set of 315/75-16 tires not just stock size. Used 35's are like gold around here 50% tread got for 500$ or more for some reason, Thats without rims too lol I can find stockers or 31-33 tires all day for less but I like how my truck sits on 35's. I've got a level kit so I clear them...
  17. pelky350

    Re treaded tires?

    You are correct I didn't even think about that they are in fact a re cap not re tread. I am just gonna run them for a bit I feel or see anythjng wrong with them after driving a bit they will be tossed. They are not currently on rims im doing that Monday, it's really cheap for me I have a friend...
  18. pelky350

    Re treaded tires?

    He said they went 1000 miles so far? Why can a product be produced or have a market if they don't sometimes work? I have a spare with me and jack they can't all die at once. As mentioned I am at 0 percent tread and have broken belt so they can't be any worse? Also I'm in Oregon out hottest...
  19. pelky350

    Re treaded tires?

    So it's too late already bought a set of retreaded tires, base tire is bfg at and the re tread is 1000 miles new everything looked good and I only paid 100$ for the set. Currently running on totally bald 0 tread bfg mts. Are these new tires really that bad? thy have 100 percent tread load range...
  20. pelky350

    Dana 60 camber--live with it or try adjust/shim/?

    I would just rebuild the whole kingpin it's not too hard to do, I had to replace the top metal piece that the plastic bushing rides on so I just did the whole thing and haven't looked back, tires no longer how any uneven wear and I've never had it aligned yet. All steering parts also good shape...
  21. pelky350

    Electri Lift pump for 90cc?

    I'm not to worried about having much black smoke anymore mine went away quite a bit after new turbo and intercooler
  22. pelky350

    Champion Radiators for the IDI

    My parts store plastic tank hasn't died yet after 2 weeks!
  23. pelky350

    Seat Covers

    Same boat parts store covers make it only 6 months before being totaled, I usually just buy the cheapest black and camo one but currently have no cover in and I got a new seat recently and it's that plasticy stuff and idk how any seat cover will ever stay put again now, can't stand non fitting...
  24. pelky350

    90 7.3 Bus

    sells cheap enough remove drivetrain and convert a pickup into tandom axle with low miles engine and trans? I'm sure it would do alright I bet it's got a good heavy duty auto and some low gears in the rear end, are both axles drive axles? 8 tire traction if so lol
  25. pelky350

    Electri Lift pump for 90cc?

    That's what I'm looking for like at least a few years is plently for me I wouldn't expect more from one. Can I get a facet or Holley red or the gsl 392 from oriellys by chance? I have a gift card from my birthday I got if not I'm just gonna buy all my fluids with it either way I'm spending money...

Latest posts

Forum statistics

Threads
92,996
Posts
1,155,949
Members
26,578
Latest member
dogdanblue

Members online

Total: 1,421 (members: 8, guests: 1,413)

Share this page

Top