Search results

  1. R

    In dash navigation

    I want to replace my stereo win a new stereo navigation unit. Has anyone done it and which unit did you use?
  2. R

    Zf5 transmission removal

    After a little prayer and with the wife’s help we had the transmission installed in less than 10 minutes. Woohoo.
  3. R

    Zf5 transmission removal

    I agree. We could have been stranded in the middle of nowhere very easily.
  4. R

    Zf5 transmission removal

    since I had no idea what was in it, I purchase a kit that has everything. Flywheel, clutch, pressure plat and all bearings. I also purchased a new clutch fork. Start fresh. The trans has been replaced at sometime as there is yellow marker on the drain and fill plugs. It is very tight and shifts...
  5. R

    Zf5 transmission removal

    I removed the down pipe. Removed the rest of the bolts and the trans came out like it was on greased rails. Here is a pic of the clutch. We came back from northern Idaho towing my Jeep. It never should have made it.
  6. R

    Zf5 transmission removal

    I am able to do the work, just takes some time. I have plenty of time. So the down pipe goes from turbo to exhaust? And the crossover pipe goes under the engine to the other? I think I got that right.
  7. R

    Zf5 transmission removal

    I have to replace my clutch. I have removed the transfer case, the cross members and 2 of the bell housing bolts. I understand there are 6 bolts. Do the bottom two go in from the engine side? I also found one post that said the turbo has to come off. How difficult is that. Guess it is a good...
  8. R

    Replace clutch

    So my wife was going to babysit grandkids and she called. Truck won’t move. When I got it home and opened up clutch cover plate i found the clutch disk paper thin. what are the torque specs for the mounting bolts for transmission and transfer case? Any tips on replacement that will make it go...
  9. R

    Cracked T19 belhousing and popping out of first...ZF5 or fix?

    You can get a spool gun for your mig welder. That will allow you to do aluminum.
  10. R

    Vacuum canister

    I’ll have to look at the cruise closer. I think it is all electric. No hose going to the motor assembly. Forgot about the brakes. They stop real good. I do need to replace the parking brake cables and figure I may as well replace rear brakes at the same time as I don’t know what they are like.
  11. R

    Vacuum canister

    I am thinking of installing a vacuum canister to my vacuum rail. Has anyone done this? Is there a benefit? What all is the vacuum used for? My cruise control is electric. At higher speeds it surges back and forth slightly. Enough for me to feel but not for the wife to complain. If I take off the...
  12. R

    What is this connected to vacuum

    Great, thanks
  13. R

    What is this connected to vacuum

    This is connected to my vacuum rail. It aLos has electrical wires going to it. It is located drivers side front by the radiator. Also I have read that the vacuum pump is located below the alternator. Why is mine located on top of my engine?
  14. R

    Olive

    I wondered what those rings were in the injector kit I installed. Sure glad I didn’t toss them out.
  15. R

    Olive

    What is the o,I’ve and where is it? How do I reseal it? Pics would be fantastic.
  16. R

    Electric pump

    i am going to add an electric pump on the frame rail in a couple weeks. I have some questions. Do I just use a tubing cutter and cut a section out of the fuel line? If so, do I just slip the hose over the line and tighten the hose clamp? What size hose? Where to pull power from so it is off when...
  17. R

    Electric fuel pump wont push gas unless engine cranking?

    My 93 7.3 turbo died on the road today. I have only 30 miles on my full tank. I could not get it to start or bleed the air out. Mechanical pump only has 1300 miles on it. My nephew had an electric edelbrook fuel pump on the fender that he had been using. I hooked it up before the mechanical pump...
View older results

Latest posts

Forum statistics

Threads
92,996
Posts
1,155,941
Members
26,574
Latest member
abcdefg

Members online

Total: 1,660 (members: 8, guests: 1,652)

Share this page

Top