Search results

  1. Austin86250

    Fuel system

    Appreciate it, is there an concern whipping though fields and possibly damaging it?
  2. Austin86250

    Fuel system

    Are cheap sumps ok or do you have to go for name brands?
  3. Austin86250

    Fuel system

    With the finicky fuel selector valve and failing shower heads I’ve got this in the planning stages Couple questions Is it ok to just run the feed line like the return line is? As pictured 38 gallon tank straps? Where to get them Sump or no sump? Keep in mind I am planning for an lines I...
  4. Austin86250

    80-91 stripped steering wheel nut threads options

    What would be the next size down 14mm fine thread? It’s 5/8 fine thread right now 9/16 may be a jump
  5. Austin86250

    So what did you do with your truck today?

    When my idi is down like right now I drive my duramax i Inherited and they never came with high idle you can imagine how bad it is trying to warm up a diesel at 500 rpm So I took a big step out of my comfort zone today and installed high idle I had to remove the pcm and ecm to add a pin into...
  6. Austin86250

    80-91 stripped steering wheel nut threads options

    You inspired me to not give up on those threads!
  7. Austin86250

    80-91 stripped steering wheel nut threads options

    If y’all have any manual tilt columns for sale and are willing to ship let me know
  8. Austin86250

    80-91 stripped steering wheel nut threads options

    They are always gone/ broken they are really high demand here and sell for hundreds
  9. Austin86250

    80-91 stripped steering wheel nut threads options

    Oh I also have an auto column I forgot about that
  10. Austin86250

    80-91 stripped steering wheel nut threads options

    My manual tilt column steering wheel nut threads are done, I have a non tilt manual that’s good what are my options here? Can I put the tilt on the non tilt? Can I swap the shaft inside the column? Would love to keep tilt here
  11. Austin86250

    1986 F250 6.9 belt change

    It took me TWO YEARS to figure out the 1/2” drive hole was on the ac bracket too it was just full of grease, you could imagine how loose my belt was
  12. Austin86250

    Return to center issues

    Update found a shop 2 hours away just dropped it off
  13. Austin86250

    How best to replace high-pressure power steering hose....?

    I like to pull the p/s pump it’s 2 bolts a couple years ago I would do it with it in but I try and make things easier now, I can’t remember which line it was on the gear box but the one that’s to the passenger side I like to remove the driver side one for easier access, Like kizer said make...
  14. Austin86250

    90cc or 110cc injection pump for a 6.9idi

    I’m rockin a 90cc non intercooled with an ats 085 turbo and I can see 1k egts when I’m going balls to the wall, that’s all I want to see unloaded personally I just feel a 110 will be out of control in that department although maybe a bigger turbo = lower egts?
  15. Austin86250

    Return to center issues

    I have a press
  16. Austin86250

    Return to center issues

    After weeks of calling waiting getting quotes I guess I’m out to do the king pins myself, with that being said can anyone link me to the reemer I need?
  17. Austin86250

    Self regulating glow plugs

    The Bosch ones for sale for these motors are self regulating, but I’ve never had issues with my manual glow plugs Like idi bronco says 8 seconds max if you need more wait a couple seconds but really you have fuel or compression issues if you need much more than that
  18. Austin86250

    Eccentric issues.

    Here’s to cams with the eccentric, spacer, hold down plate, and gear pressed off of course I don’t have A picture of the pressed parts
  19. Austin86250

    Eccentric issues.

    I was going though fuel pumps every2-5k miles on a bad eccentric new eccentric haven’t had an issue in 7k
  20. Austin86250

    Eccentric issues.

    Your phone camera is a lot easier than than the mirror method, this was the only picture I could find in my camera roll in a timely manner but you can see it a lot better
  21. Austin86250

    7.3 idi swap for 7.3 turbostroke

    U2slow brings up good point when comparing to an idi hard starting is invalid as the same argument for idis can be used just replace the glow plugs and make sure your high pressure oil is good, the Huei injection system is way more complicated than mechanical or even common rail Yes an idit is...
  22. Austin86250

    circular base flange at end of exhaust?

    Id love to hear actual science vs what I here in my small town
  23. Austin86250

    circular base flange at end of exhaust?

    He is right, during a regen the exhaust coming out of the tip will melt plastic if it’s close, and can even light paper and bushes on fire if close enough, so that’s why there are weird slits to introduce cold air to not make it a fire hazard
  24. Austin86250

    So what did you do with your truck today?

    Ohh I always thought you where Brian grilli this confirms it
  25. Austin86250

    Timing question

    How did you go about that?

Latest posts

Forum statistics

Threads
92,996
Posts
1,155,943
Members
26,575
Latest member
Gerhard

Members online

Total: 1,640 (members: 8, guests: 1,632)

Share this page

Top