Search results

  1. Agnem

    NEW PRODUCT INTRODUCTION! Moose Boost turbo KITS now available!

    The regular price on the Moose Boost turbo is $1623. I have a less expensive, untested traditional technology journal bearing model available for about $1100.
  2. Agnem

    NEW PRODUCT INTRODUCTION! Moose Boost turbo KITS now available!

    Thanks for the feedback. It's been a tough year here, so R&D dollars just haven't really been available, hence the slow process. I'm hoping there will be enough interest without dyno sheets, as part of the catch 22 at this point, is I need to buy three upgrade kits to actually get one in my...
  3. Agnem

    NEW PRODUCT INTRODUCTION! Moose Boost turbo KITS now available!

    I know it has been a long time in coming, but the long promised Moose Boost turbo system is now available. What's even better, is that this is the result of a joint business venture between Conestoga Diesel Injection, and the fine folks at Hypermax Engineering. These kits are a Hypermax built...
  4. Agnem

    Intercooler w/ wide radiator

    Sadly, the write up I did on this project is all gone. What I remember is that I used an intercooler from CXR Racing on ebay, one that was designed for a high performance 5.0L Mustang. I used two pipes from a Hypermax intercooler kit and the intake hat, then connected the pipes to the...
  5. Agnem

    New truck in the fleet.

    Nice score Goose!
  6. Agnem

    How to wake up a 7.3 from a 10 year slumber

    A decade is a long time. You are rolling the dice with the IP and injectors. We've had pumps come in that were full of rust, but still rebuildable, and thought "good thing they didn't try to start this". My RECOMMENDATION is that you just put a new fuel system on it from the get go. You...
  7. Agnem

    Advance plunger leak on ip...home reseal?

    We sell something we call the "Moose Advance Seal Repair Kit" which has everything in it you need, including detailed instructions with pictures. Kinda hard to go wrong with that one. And the price is fair.
  8. Agnem

    Ouch! 2 bills to test my IP

    I'm sorry to say that the only thing your shop did wrong, was accept your request to test it. Honestly, if you were talking to me, I would have talked you out of it, because like your shop did, I'd have to charge you an hour labor, and a $50 bench fee. With tax and/or shipping, it would be...
  9. Agnem

    Clutch slave bleeding problems

    The problem is the air is stuck in the line, and there is not enough travel in the slave to move the fluid the whole way. You basically have an air bubble in the line that is just moving back and forth and not leaving ever.
  10. Agnem

    FS: 2002 Excursion 7.3L well maintained, still very clean.

    Having no kids at home now, and too many vehicles in my fleet, it's time to part with the Moose Wagon. http://www.ebay.com/itm/2002-Ford-Excursion-Limited-Sport-Utility-4-Door-/162257601102?forcerrptr=true&hash=item25c74e824e:g:mN8AAOSwYIxX2bOA&item=162257601102
  11. Agnem

    Happy Halloween From Conestoga Diesel Injection & Myself

    Thanks to FORDF250HDXLT for this spirited effort. 54 Shopping days until Christmas.
  12. Agnem

    Possibly the stupidest idea I've had to date...

    Stay away from the DS4 injection pump on a 6.5. Stick with the DB2.
  13. Agnem

    Need help. 6.9 not firing.

    If you have fuel at the injectors, but no smoke of any kind, I wouldn't be looking at timing or anything like that. You need heat, air or fuel. One of those three is missing. Focus there. For heat, plug in the block heater. For air, yeah that's an easy one, because surely you've made sure...
  14. Agnem

    6.9 IDI ARP Headstud ?

    If your torque wrench is properly calibrated, and your having repetitive head gasket failures, I would question the flatness of the block or head. ARP studs don't stretch that I've ever heard.
  15. Agnem

    glow plug controller bad?

    I've explained countless times how to test your glow plug relay, but people still want to go out and buy a new one not knowing if that is really the problem. I don't understand people. So... one more time.... Put a volt meter across the large lugs on the relay. It should show current...
  16. Agnem

    Stanadyne or Howes

    I'm an Archoil dealer, and I run their fuel additive in my Powerstrokes. We know for a fact that the oil additive helps the 6.0's with injector sticktion issues.
  17. Agnem

    Happy Halloween From Conestoga Diesel Injection & Myself

    I think it is the election killing everything. We are S L O W right now. In fact, maybe the worst month in a long time. *sigh*. Even the phone doesn't ring with people looking for free advice like it always does. I think the living dead of the 2016 election are a hell of a lot scarier than...
  18. Agnem

    Cylinder 8 knocking - not the injector or valvetrain, now what?

    So essentially you only have the noise while you have combustion. Curious if you have tried loosening the 7 other lines and cranking only with the #8 active to see if you can hear the noise any better. Be that as it may, I would suspect your hunch is correct, sad as it may be.
  19. Agnem

    Walmart Batteries

    One last comment on the Walmart deal.... Your not hurting Walmart by destroying the battery so you can get a new one. Your hurting the manufacturer. Walmart is extremely cruel to their vendors. When I was with RCA, we had a whole warehouse full of returned VCR's from Walmart. Problem was...
  20. Agnem

    TIMING SERVICE REGISTRY

    State: CO Colorado City: Boulder This information is not verified, but I have spoken with a partner of this shop, and was assured their diesel tech was experienced at timing IDI's. He did not know what equipment they had. Because it is a business, I'm not posting any pricing. Call for...
  21. Agnem

    Happy Halloween From Conestoga Diesel Injection & Myself

    I'd just like to make sure you all know that FORDF250HDXLT does this (as he did last year) out of the goodness of his heart. It was his idea, and we are happy to be involved with such a giving person who has demonstrated multiple times now that you really can find good and kind people in the...
  22. Agnem

    I wonder what Valvoline does different?

    I think it is a well accepted fact that the Delo 400 works better than the Rotella-T on oil thirsty engines. Perhaps the Valvoline is even better. Here at my shop, we are big fans of the Brad Penn HD Select. That's the brand I researched when I decided to sell it. Visited the factory in...
  23. Agnem

    Why is my timing so retarded?

    We did do some dyno experimentation at the 10th annual IDI Weekend, and we firmly concluded that 8.0 to 9.5 was the sweet spot for timing. Any more or any less, and you loose power. This was with standard #2 diesel fuel and no additives, at 80 degrees air temp on a Dynomax wheel. While each...
  24. Agnem

    2017 Oilburners Rally... Louisville or Nashville... VOTE NOW!!!

    Wow. I feel real lucky to have gotten that plant tour then.
  25. Agnem

    Running rough, no solutions yet...

    Based on your oil system observations, the problem does sound more like a fuel supply issue. Can you T into your fuel line going to the heads and check the pressure?

Latest posts

Forum statistics

Threads
92,997
Posts
1,155,967
Members
26,583
Latest member
matthewcslayton

Staff online

Members online

Total: 793 (members: 4, guests: 789)

Share this page

Top