Search results

  1. chickenpot

    WTB Portable boring bar Van Norman, Kwik Way, Storm

    With tool kit- shooting for the stars here, who has a deal on a boring bar for a guy? I'd drop around $1200 on one right now. Tired of being limited by zero machine shops locally and i have multiple projects that involve blocks getting cut. Let me know if anyone can help. Located in Illinois but...
  2. chickenpot

    Took some life away from my starter today

    Truck sat for a day, went to start it up and when it gets cold my glow plug solenoid doesnt engage sometimes, it takes a few times of holding the button. I have one to replace it but ive been lazy.. that's beside the point. I thought, "lets just see how long it takes to start without plugs"...
  3. chickenpot

    WTB IDI adapter plate

    So i can bolt a starter to a project motor
  4. chickenpot

    Hvac function selector

    Anyone have the part # for this HVAC switch? Not the blower switch but for the vacuum.
  5. chickenpot

    Worn traction beam bushings?

    Ball joints are tight yet, no slop. Wondering if this weird camber can be the result of the traction beam bushings wearing out. definitely due for an alignment but this seems to be getting worse and the ball joints still check out.
  6. chickenpot

    rear brakes working a little TOO well now

    Rebuilt the rear brakes on the chief. new hardware, wheel cylinders, shoes, drums, adjusters, parking brake cables. my problem is now with no load, the rears are trying to lock up on me. found out when a car in front of me chickened out on a yellow lights and i almost did a fish tail. Is the...
  7. chickenpot

    Parking brake lever pivot bolt

    Ok got a question guys can anyone help me find a source for the bolt that the parking brake lever pivots on on the 10.25? Its a drw axle. Was doing brakes last night and i wanted to replace the wheel cylinders and all hardware etc, lube up the parking brake linkage.. Well i got one side out and...
  8. chickenpot

    First run of the scrap metal Po' Boy Centrifuge

    It's been a decent amount of trial and error but I found out what works and got everything in working order enough to run 5 gallons through last night. I'm pretty excited and hope everything holds up well to the many hours I plan on running this. In the end, was it worth it to build a fuge vs...
  9. chickenpot

    WTB Delphi IDI injector cores

    set of 8 or whatever you got. offering $10 per
  10. chickenpot

    Swap R&P or whole rear? SRW vs DRW?

    So I have 2 10.25 rears, one is a 1993 dually with 4.10s and the other is a 1997 SRW parts truck with 3.55s. Does anyone know if its possible or feasible to just swap out the 4.10s with the 3.55? planning at the minimum to have to do a full setup on it, is there anything else that would be a...
  11. chickenpot

    1994 F350 dash harness connector ID help

    By chance, could anyone tell me what this connector is for? Did a complete dash harness swap into my 1993 F350. Donor harness came out of a 1994 F350, 4x4, and assumed auto trans because of the factory jumper across the clutch switch connector. Recipient truck is a 1993 f350 with the ZF5...
  12. chickenpot

    Belt driven fuel pump discussion

    Hi everyone. Been lurking for a while after grabbing a 1991 f350 dually 5spd cab+chassis for pretty much the price of the drivetrain. Drove it home 3 hours. Anyway have a few good sources for clean WVO, want to run my truck on it. Little bit of background- I work as a food service equipment tech...

Latest posts

Forum statistics

Threads
92,929
Posts
1,155,111
Members
26,431
Latest member
Dusty27

Members online

Total: 1,015 (members: 16, guests: 999)

Share this page

Top