Search results

  1. Spun4Fun

    Hunting an IDI

    Man, i could see my self rolling on something like that , i have near me a 1990 f250 w fresh rebuild tranny 2x4 super clean but has blown eng for less than $1k . He said Stat stuck and he fried the eng , IP and injectors should be good so is every thing else. Finding a good replacement eng...
  2. Spun4Fun

    Hunting an IDI

    Man this is one bad ass looking truck.
  3. Spun4Fun

    Hunting an IDI

    My daughter is a new driver and into older trucks, that what she want so being a diesel head and proud owner of a 7.3IDI i am trying find her one with Single axle either 6.9 or 7.3 IDI Manual or Auto doesnt mater she is a One tuff Girl and can drive both. She wanted to drive my Dually cc but...
  4. Spun4Fun

    E4OD playing tricks

    hahahaha, i wouldn't mind to convert it thats for sure, all my other diesels are 5 sped and i prefer manual
  5. Spun4Fun

    E4OD playing tricks

    Well the issue got more funkier as the truck decided to not shift pass the 1st gear the other day on my way to work. So i pulled to the side let other cars pass . shifted on P back to D and we up and go in no time. Trouble never been back since, Truck drives perfect and never acted up again...
  6. Spun4Fun

    E4OD playing tricks

    I guess i have 3 more to go it happened when it was on D . Lately it has been shifting firmer and thought that because i have a heavy foot along the shift kit which tends to make it shift firmer , i been easy on the throttle and it was shifting smooth until that happened yesterday MLPS been...
  7. Spun4Fun

    E4OD playing tricks

    uh ..The manual . Yes but that never show the advance trouble shooting skill set that comes with life experience!:D
  8. Spun4Fun

    E4OD playing tricks

    2 years ago i had rebuilt the tranny , Transgo full shift kit installed, All clutches and bands looked great . TC was almost new and i did not replace it \. I recently done IP, New injectors and TPS adjustment to fall in the correct range. Plenty of successful trips under the F350 and E4OD belt...
  9. Spun4Fun

    E4OD & IP

    Thanks for calirfication ,So in a short wording 1.2 V and am off
  10. Spun4Fun

    E4OD & IP

    Try to get back to this topic as am experiencing firmer shifting from 1st -2nd as before . I installed TransGo shift kit 1 years ago when i was rebuilding my tranny which made it more firmer, after the new Performance RD2-80 IP i noticed more firmer shifting as my TP voltage was off, so i...
  11. Spun4Fun

    IP Adjustment

    IP been bone dry since i replaced the Line #7 with OEM line . Thanks all
  12. Spun4Fun

    Front Crank Seal

    Yes i RTV'D both the Keyway and the Big fatty Washer not the main bolt head but there is enough to make its way for the bolt. Oil streak not coming from the front its behind the damper running down on the oil pan nose. running it today more than i did yesterday
  13. Spun4Fun

    Front Crank Seal

    NOOP , NOOP . Did not see that step any where unless it was hidden trick/ trade secret
  14. Spun4Fun

    Front Crank Seal

    Well if that was the case for my truck wouldn't that show right away specially at fast idle and during the time it sat in the drive way which about 10 minute as i was waiting for the thermostat to open up so i can add more coolant (But it was bone dry then) ..! Am just thinking out loud. I...
  15. Spun4Fun

    Front Crank Seal

    The damper had grooved ring all around from the old seal so a sleeve in place. Hope the seal will seat and oil stops like yours did because am not sure what else could it be but sure enoought its aggravating
  16. Spun4Fun

    Front Crank Seal

    Naaah It's oil, I cleaned every thing squeaky clean under with kerosene , it looks like a New Eng down there
  17. Spun4Fun

    Front Crank Seal

    All went well Monday Relatively Simple but rather messy. Old seal out, New Repair sleeve in place on the back of the damper as i could see the old Seal wear ring grooved all around the damper, New seal seated In place. added the Right stuff to the Key way , Damper back on little more of the...
  18. Spun4Fun

    Power Steering Fluid BLOWS out the Reservoir

    Yesterday i was doing more involved work to replace the front crank seal and decided to disconnect , clean and blow some air in the return line before i declare it bad. I noticed some crud had been blown out when i applied compressed air to clean it. I uses electrical pump so i removed all the...
  19. Spun4Fun

    Power Steering Fluid BLOWS out the Reservoir

    Correct , I replaced the pressure hose but not the return . I tried to get as much air as possible out of the system. So I guess I have to replace the PS return line as well ?
  20. Spun4Fun

    Power Steering Fluid BLOWS out the Reservoir

    Uhaaaa . I used PS fluid not Transmission fluid Thanks for pointing that out :Thumbs Up
  21. Spun4Fun

    Power Steering Fluid BLOWS out the Reservoir

    Yes while the Eng was running , also it had the right amount of oil but it started to make whining sound like it was low on oil but it went away after it puked some out the vent Pretty strange shitz
  22. Spun4Fun

    Power Steering Fluid BLOWS out the Reservoir

    What's going is when the pump warms up, I start driving then park the truck i notice PS fluid coming from the vent cap The line I replaced is the short line ( high pressure) line and it was the same diameter 800-1500 PSi as listed by Rock Auto Rack .. I meant the steering box I thought I...
  23. Spun4Fun

    Power Steering Fluid BLOWS out the Reservoir

    After i replaced the Hight pressure hose during the time i was doing some other work to the IP .etc as i was thinking that is the main issue, i started to notice Oil leak around the rack by the driver side and it started to get worse. I cleaned it up pretty good and good and had a helper turn...
  24. Spun4Fun

    Front Crank Seal

    I found a Timken Crankshaft Front Seal Repair Sleeve KWK99250 is available at my local part store NOS Genuine Timken Crankshaft Front Seal Repair Sleeve KWK99250 Will that part be the same Spec as national 99250 . I could not find any data spec on it.
  25. Spun4Fun

    Front Crank Seal

    Thanks for the trick and welcome Back mate What's the torque spec on all

Latest posts

Forum statistics

Threads
92,929
Posts
1,155,111
Members
26,431
Latest member
Dusty27

Staff online

Members online

Total: 959 (members: 9, guests: 950)

Share this page

Top