Recent content by silverrex4

  1. S

    What does this noise sound like?

    Had same issue and posted. Turned out to be 1 blown lifter and 3 or 4 bad lifters with the retainers starting to fail. Take the rockers off and push rods and send a camera down and see if the lifter retainer is starting to come apart. Check out my photos, and you can see. It's the loud thump...
  2. S

    New duralift running at 3psi

    How is your tank pump? In the site glass is it completely full? Any debris at the bottom. You can use an air and blow back into the tank to see if there is a restriction. That pump should be clacking away.
  3. S

    Stuck lifter help???

    Update: all put back together and running smooth as can be. Still your typical noise that 6.9 make but all good. Thanks for all the help much appreciated.
  4. S

    Broke down

    With the diesel standards today you need to put an additive in it. All the additives have something to help with rust, water, alge and *lubricity*. I have had it shut off before randomly because it ran out of fuel. Had to keep purging the Schrader valve with the fasset lift pump helping. Once ya...
  5. S

    Stuck lifter help???

    Never know, first thought injectors, but took them apart and cleaned and shimmed to pop test them close to about 1950, still the same tick. Couldn't keep driving it knew wasn't good. Had to turn to the fourms. YouTube only goes so far. With price of parts today, have to really confirm. Do the...
  6. S

    Stuck lifter help???

    Thanks goat, that line was just out of the way, that is why it looks so long, I routed it in front of the intake. Appreciate it much for looking out. Parts are ordered and just prepping in the mean time. Gonna run thru head bolt torque, clean up intake, and prep everything and try and keep these...
  7. S

    Stuck lifter help???

    Much appreciated budd, keep ya updated once it gets up and running again. Thanks again
  8. S

    Stuck lifter help???

    Well guys it's confirmed, that one lifter was shot, I was able to use a magnet and get the retainer and clips, just worried about the flat spacer that is under the retainer but don't remember if I grabbed it, everythingwas coveredin oil. There were 3 others lifters ready to go. No idea!!! Valley...
  9. S

    Stuck lifter help???

    Well it looks like I'll be needing lifters. The one picture shows there is no retaining clip and square piece or follower that holds the rod up into correction position. Do you guys recommend any new lifter from rock auto? Can I reuse the valley pan? And going to just add updated rockers. Not...
  10. S

    Stuck lifter help???

    I will double check tomorrow, but usually they go in pretty easy. Would they pump oil if there off to the side?
  11. S

    Stuck lifter help???

    Hey guys, i was trying to track down a annoying metal ticking. Working on 6.9 with factory ats turbo. Took off driver's side cover and took all rockers off and cleaned up and lightly smoothed any wear on the aluminum bridge. I had new push rods and threw them in and torqued everything back...
  12. S

    Injector parts??

    Hey all, hope everyone doing well. Broke out a set of old BB code injectors to clean them and pop test them. They are popping all over the place. The lowest was 1500 and the highest is 1900. I need to get them all at 1900 -1950. (For turbo 6.9). Where does everyone get there parts from. Need...
  13. S

    Injectors

    i have never used them. i just recently bought the delphi injectors. not bad they were about 30 bucks a piece. they work well. just make sure they pop test each one so you know they all work together. if your in a pinch you can just put them in out of the box. Sent from my SM-G950U using Tapatalk
  14. S

    Help please. 86 f250 6.9 idi non-turbo (another gpr thread)

    very sorry, mine idk why is located on the fender, i have to move it. the two lost above is correct. i hope i didnt make you confused. let us know how you made out. Sent from my SM-G950U using Tapatalk
  15. S

    Help please. 86 f250 6.9 idi non-turbo (another gpr thread)

    that's it, the black one on the fender. the bottom silver relay is for the starter with the heavy gauge red wire. those go to the batteries and starter. the glo plug controller is located on, if your standing looking at the truck, to the right behind the intake closer to the break booster. what...
See more

Latest posts

Forum statistics

Threads
91,304
Posts
1,129,965
Members
24,110
Latest member
Lance

Members online

Total: 697 (members: 6, guests: 691)

Share this page

Top