Olds64's latest activity
-
Olds64 replied to the thread Underhood vacum.With a 92 OBS truck your brakes might be hydroboost. Is there a vacuum hose running to your master cylinder? Otherwise you are correct... -
Its a 1992 f250. 7.3 4x4
-
Olds64 replied to the thread Underhood vacum.All of the accessories under the hood use vacuum off of the vacuum pump from the vacuum manifold above the passenger's side valve cover...
-
Olds64 replied to the thread My waste oil cleaning set.Excellent! I was talking to a friend about centrifuging oil the other day. I guess it's the best way to clean WMO for use as fuel.
-
I got a DeLaval centrifuge From a 50s ice breaker. It's really quite cute. I still have to add an online oil heater before the inlet...
-
Olds64 replied to the thread 1994 F350 IDI Turbo help.Cool project! If you replace the glow plugs make sure you only use Motorcraft glow plugs. The others are known to separate and leave...
-
Olds64 reacted to ROCK HARVEY's post in the thread What would you get with $50 for your IDI? with
Like.
I’d get 2 of these bad boys: https://a.co/d/04bjlMP5 -
I noticed their description says that the heads need machined after install. Ford allows for a +\- .0025 protrusion or recession. I just...
-
I was in a pinch and only had access to a Murray from Oreilly’s, but my motorcraft is on the way, as I’m replacing the waterpump, fan...
-
Really need to verify that power from the tcm relay to the tcm is solid. After that, grounds to the tcm. what I have seen several...
-
Olds64 replied to the thread Precups now available.Excellent! Now that there's a source for the pre-cups I suppose machine work will be easier. I don't even know how much you can take off...
-
CDD started selling precups, so thats fun...
-
Olds64 replied to the thread 6.9 IDI valve train questions + head gasket job.That's a good price for the tool. :rock:
-
Olds64 reacted to 8769bigred's post in the thread 6.9 IDI valve train questions + head gasket job with Like.
@Olds64 The FTE write up you shared is very good. I have it linked above. I found a machine shop locally that is making me the tool...
-
Olds64 replied to the thread 6.9 IDI valve train questions + head gasket job.Having difficulty posting with my phone... anyways. :frustrate Here's a thread that came up recently on FTE...
