Olds64's latest activity
-
Google the operating instructions, as that's an unusual one for here... Then we can try... -
Find the ATSG e4od rebuild manual and read through it to find all the availiable updates that were done through out its life cycle to...
-
Olds64 replied to the thread 6.9 E350 C6 to E4OD or 4R100?.Did you have to use a FIPL with that aftermarket controller?
-
I have an e4of in my ambulance with USShift controller. It's not a manual, but so far it's OK.
-
Olds64 replied to the thread 6.9 E350 C6 to E4OD or 4R100?.Make sure you get a Fuel Injection Pump Lever (FIPL) from the side of the IP when you source the transmission. It works like the VRV and...
-
I converted to E4OD and upgraded the transmission to a 4R100 plus a few other goodies. BE SURE you get a DIESEL version of the E4OD or...
-
Olds64 replied to the thread Part I’d help.I never would have guessed.
-
It is from the lower dash panel if its foam. On my 94 its black and near the storage recessed area between that and the fuse panel cover
-
Olds64 replied to the thread Joined the IDI crowd again.If you're waiting on injectors from R&D you MAW look into an IP as well. :sly
-
Olds64 reacted to 8769bigred's post in the thread 6.9 IDI valve train questions + head gasket job with
Like.
Ok so I went back to the drawing board for the valve guide measurements. I ditched my harbor freight dial indicator and got a good one... -
Olds64 replied to the thread PSA: For those replacing 4wd front shackle bushings with polyurethane, check your shackle first..Thanks for the heads up! :thumbsup:
-
Olds64 reacted to headhunter38's post in the thread PSA: For those replacing 4wd front shackle bushings with polyurethane, check your shackle first. with Like.
If you have 4wd and are planning to replace your front shackle bushings with polyurethane bushings, check your shackles first. Some...
-
Olds64 replied to the thread Help....Need a New Diesel Filler Neck for the MidShip/Side Tank.Do you need the rubber hose that goes between the fuel tank and filler neck? If so, this is the only place to get the right part...
-
Guys... This needs to be our motto for our idi addicts support group. I'm putting this on our next rally tee shirts hahahhaa
-
Olds64 replied to the thread Putting a turbo 6.9 IdI.Excellent! :Thumbs Up Necessity is the mother of invention. I was dumbfounded when he expected 35 psi of boost. Ford used 2...
